12/30240603 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BS EN 60320-1 ED 3.0 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
31-10-2015
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 General notes on tests
6 Standard ratings
7 Classification
8 Marking
9 Dimensions and compatibility
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction
14 Moisture resistance
15 Insulation resistance and electric strength
16 Forces necessary to insert and to withdraw the
connector/appliance outlet
17 Operation of contacts
18 Resistance to heating of appliance couplers for
hot conditions or very hot conditions
19 Breaking capacity
20 Normal operation
21 Temperature rise
22 Cords and their connection
23 Mechanical strength
24 Resistance to heat and ageing
25 Screws, current-carrying parts and connections
26 Clearances, creepage distances and solid insulation
27 Resistance of insulating material to heat, fire and
tracking
28 Resistance to rusting
29 Electromagnetic compatibility (EMC) requirements
ANNEX A (normative) - Relation between rated impulse
withstand voltage, rated voltage and
overvoltage category
ANNEX B (normative) - Proof tracking test
ANNEX C (normative) - Routine tests for factory wired
appliance couplers related to safety
ANNEX D (normative) - Test schedule
BS EN 60320-1 ED 3.0
| Committee |
PEL/23/3
|
| DocumentType |
Draft
|
| Pages |
55
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| IEC 60364-4-442:1993+AMD1:1995+AMD2:1999 CSV | Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 442: Protection of low-voltage installations against temporary overvoltages and faults between high-voltage systems and earth |
| IEC 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.