12/30258334 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
31-05-2013
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements
6 Test methods
7 Evaluation of conformity
8 Marking and labelling
Annex A (normative) - Profile terminology
Annex B (normative) - Glass content by density
of laminate
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Directive
Bibliography
BS EN 1013
Committee |
B/542/8
|
DocumentType |
Draft
|
Pages |
60
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 1013 : DRAFT 2012 | Identical |
EN 508-3:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
EN ISO 11664-2:2011 | Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
ISO 527-4:1997 | Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
EN 506:2008 | Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
ISO 6603-1:2000 | Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing |
EN ISO 527-4:1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
XP P38 506 : 99 XP | BUILDING ROOFING - LIGHT TRANSMITTING POLYVINYL CHLORIDE (PVC) PROFILED SHEETS - RESISTANCE TO PASSING THROUGH OF A LARGE DIMENSIONS SOFT BODY - TESTING AND SPECIFICATION |
EN ISO 1043-2:2011 | Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) |
EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
EN ISO 11664-1:2011 | Colorimetry - Part 1: CIE standard colorimetric observers (ISO 11664-1:2007) |
EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
EN ISO 6603-1 : 2000 | PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING |
ISO 11664-1:2007 | Colorimetry Part 1: CIE standard colorimetric observers |
XP P38 505 : 98 XP | BUILDING ROOFING - LIGHT TRANSMITTING GLASS FIBRE REINFORCED POLYESTER PROFILED SHEETS - RESISTANCE TO PASSING THROUGH OF A LARGE DIMENSIONS SOFT BODY - TESTING AND CLASSIFICATION |
EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
EN ISO 13468-2:2006 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
ISO 472:2013 | Plastics Vocabulary |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 4892-3:2016 | Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
ISO 13468-2:1999 | Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument |
EN 494:2012+A1:2015 | Fibre-cement profiled sheets and fittings - Product specification and test methods |
EN 534:2006+A1:2010 | Corrugated bitumen sheets - Product specification and test methods |
EN ISO 1172:1998 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
EN ISO 14125:1998/A1:2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
CEN/TS 1187:2012 | Test methods for external fire exposure to roofs |
XP P38 507 : 2000 XP | BUILDING ROOFING - LIGHT TRANSMITTING (PC) PROFILED SHEETS - RESISTANCE TO PASSING THROUGH OF A LARGE DIMENSIONS SOFT BODY - TESTING AND SPECIFICATIONS |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
EN ISO 13468-1:1996 | PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
ISO 1043-2:2011 | Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
ISO 178:2010 | Plastics Determination of flexural properties |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.