• Shopping Cart
    There are no items in your cart

AEP-63 : 2009

Current

Current

The latest, up-to-date edition.

PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-04-2009

Publisher

NATO

Free

CHAPTER 1 - INTRODUCTION
CHAPTER 2 - SCOPE
CHAPTER 3 - NORMATIVE REFERENCES
CHAPTER 4 - DEFINITIONS
CHAPTER 5 - FIELD OF APPLICATION
CHAPTER 6 - REQUIREMENTS FOR QUALIFICATION
CHAPTER 7 - QUALIFICATION TESTS
CHAPTER 8 - PAINT IDENTIFICATION
CHAPTER 9 - TEST REPORT
ANNEX A
ANNEX B - SPECIFIC TEST METHODS

Specifies the performance requirements for non-skid performance and corrosion resistance by non-skid coating systems of ships exterior and interior decks exposed to the marine atmosphere. Also describes high durability protective non-skid coating systems for ships exterior and interior decks.

DocumentType
Standard
Pages
50
PublisherName
NATO
Status
Current

STANAG 4698 : 2010 PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS AND THEIR APPLICATION FOR NAVAL PLATFORMS

BS 381C:1996 Specification for colours for identification, coding and special purposes
ISO 1514:2016 Paints and varnishes — Standard panels for testing
ISO 7724-1:1984 Paints and varnishes Colorimetry Part 1: Principles
STANAG 1162 : 0 VERTICAL REPLENISHMENT VERTREP OPERATING AREA MARKING CLEARANCES AND LIGHTING
ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 3233:1998 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 12944-6:1998 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods
ISO 3549:1995 Zinc dust pigments for paints — Specifications and test methods
ISO 6745:1990 Zinc phosphate pigments for paints — Specifications and methods of test
ISO 3001:1999 Plastics Epoxy compounds Determination of epoxy equivalent
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
ASTM D 1141 : 1998 : EDT 1 Standard Practice for the Preparation of Substitute Ocean Water
ISO 12944-5:2007 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems
ISO 2808:2007 Paints and varnishes Determination of film thickness
STANAG 1278 : 2017 STANDARD FOR THE REQUIRED LEVEL AND MEASUREMENT OF COEFFICIENT OF FRICTION ON FLIGHT DECKS
ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement
ISO 11507:2007 Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water
ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 6270:1980 Paints and varnishes — Determination of resistance to humidity (continuous condensation)
ISO 3678:1976 Paints and varnishes — Print-free test
ISO 9117:1990 Paints and varnishes — Determination of through-dry state and through-dry time — Method of test
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
ISO 2811:1974 Paints and varnishes — Determination of density
ISO 4628-4:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
ISO 11909:2007 Binders for paints and varnishes — Polyisocyanate resins — General methods of test
ISO 4628-3:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
STANAG 4602 : 2004 FIRE ASSESSMENT OF MATERIALS
ISO 2810:2004 Paints and varnishes Natural weathering of coatings Exposure and assessment
ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion
ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
ISO 11908:1996 Binders for paints and varnishes — Amino resins — General methods of test
ISO 4628-5:2016 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
ISO 4628-1:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system
ISO 8044:2015 Corrosion of metals and alloys Basic terms and definitions
MIL-STD-1623 Revision E:2006 FIRE PERFORMANCE REQUIREMENTS AND APPROVED SPECIFICATIONS FOR INTERIOR FINISH MATERIALS AND FURNISHINGS (NAVAL SHIPBOARD USE)
ISO 1248:2006 Iron oxide pigments Specifications and methods of test
MIL F 24385 : F FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER
ISO 3682:1996 Binders for paints and varnishes — Determination of acid value — Titrimetric method
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
ISO 4629:1996 Binders for paints and varnishes Determination of hydroxyl value Titrimetric method
ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
ISO 14680-1:2000 Paints and varnishes Determination of pigment content Part 1: Centrifuge method
ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts
ISO 20340:2009 Paints and varnishes Performance requirements for protective paint systems for offshore and related structures
ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
STANAG 1135 : 2017 INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS
ISO 9514:2005 Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing
FED-STD-595 Revision C:2008 COLORS USED IN GOVERNMENT PROCUREMENT
ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning
ISO 4628-2:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
ISO 10601:2007 Micaceous iron oxide pigments for paints Specifications and test methods
ISO 14680-2:2000 Paints and varnishes Determination of pigment content Part 2: Ashing method

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.