API 2RD : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2013
Publisher
Superseded date
10-06-2021
Superseded by
€253.33
Excluding VAT
1 Scope
2 Normative References
3 Terms, Definitions, Symbols and Abbreviated Terms
4 Design Loads and Conditions
5 Design Criteria for Rigid Pipe
6 Components
7 Materials
8 Fabrication and Installation
9 Riser Integrity Management
Annex A (informative) - Example TTR Design
Annex B (informative) - Example SCR Design
Annex C (informative) - Supplemental Design Information
Bibliography
Describes riser systems that are part of a floating production system (FPS).
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 04/19985215 DC : DRAFT DEC 2004 | BS ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| 04/30091601 DC : 0 | ISO 13628-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11 - FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| S.R. CEN ISO/TR 13624-2:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: DEEPWATER DRILLING RISER METHODOLOGIES, OPERATIONS, AND INTEGRITY TECHNICAL REPORT (ISO/TR 13624-2:2009) |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
| BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| ISO 20312:2011 | Petroleum and natural gas industries — Design and operating limits of drill strings with aluminium alloy components |
| CEN ISO/TR 13624-2:2013 | Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report (ISO/TR 13624-2:2009) |
| 17/30291980 DC : 0 | BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES |
| NOBLE 0029 : REV 1 | GUIDELINES FOR SUBMARINE PIPELINE INSTALLATION |
| I.S. EN ISO 19904-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| 03/314812 DC : DRAFT SEP 2003 | ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| API 1111 REDLINE : 2009 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| API 17B REDLINE : 2008 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| I.S. EN ISO 20312:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATING LIMITS OF DRILL STRINGS WITH ALUMINIUM ALLOY COMPONENTS (ISO 20312:2011) |
| I.S. EN ISO 13628-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| 10/30191247 DC : DRAFT APR 2010 | BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| BS PD ISO/TR 13624-2 : 2009 COR 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: DEEPWATER DRILLING RISER METHODOLOGIES, OPERATIONS, AND INTEGRITY TECHNICAL REPORT |
| API SPEC 17E : 2017 | SPECIFICATION FOR SUBSEA UMBILICALS |
| API RP 16Q : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
| API 2SK : 2005 : INC : ADD 1 : 2008 : R2015 | DESIGN AND ANALYSIS OF STATIONKEEPING SYSTEMS FOR FLOATING STRUCTURES |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API 17E REDLINE : 2010 | SPECIFICATION FOR SUBSEA UMBILICALS |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| I.S. EN ISO 13628-11:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| API 96 : 2013 | DEEPWATER WELL DESIGN AND CONSTRUCTION |
| API RP 16Q RUSSIAN : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
| API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| PD CEN ISO/TR 13624-2:2013 | Petroleum and natural gas industries. Drilling and production equipment Deepwater drilling riser methodologies, operations, and integrity technical report |
| API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API TR 17TR7 : 2017 | VERIFICATION AND VALIDATION OF SUBSEA CONNECTORS |
| ISO 19904-1:2006 | Petroleum and natural gas industries — Floating offshore structures — Part 1: Monohulls, semi-submersibles and spars |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| ISO 13628-5:2009 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals |
| BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| EN ISO 13628-5:2009 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009) |
| EN ISO 20312:2011 | Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011) |
| EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
| ISO/TR 13624-2:2009 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report |
| API 2INT-DG : 2007 | INTERIM GUIDANCE FOR DESIGN OF OFFSHORE STRUCTURES FOR HURRICANE CONDITIONS |
| BS ISO 19904-1 : 2006 AMD 16927 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| BS EN ISO 20312:2011 | Petroleum and natural gas industries. Design and operating limits of drill strings with aluminium alloy components |
| 07/30167130 DC : 0 | BS ISO 13624-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: DESIGN AND OPERATION OF MARINE DRILLING RISER EQUIPMENT |
| BS EN ISO 13628-5:2009 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| BS ISO 13628-11:2007 | Petroleum and natural gas industries. Design and operation of subsea production systems Flexible pipe systems for subsea and marine applications |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| I.S. EN ISO 13628-5:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| API RP 2SK : 2005 | DESIGN AND ANALYSIS OF STATIONKEEPING SYSTEMS FOR FLOATING STRUCTURES |
| API 17L2 : 2013 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| ISO 13628-11:2007 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications |
| API RP 17B:2014(R2021) | Recommended Practice for Flexible Pipe, Fifth Edition |
| API RP 17L:2013 (R2020) | Recommended Practice for Flexible Pipe Ancillary Equipment |
| API SPEC 17L1:2013 INC ERR 2:2015 | Specification for Flexible Pipe Ancillary Equipment |
| API SPEC 17L1 : 2013 INC ERR 2:2015 (R2020) | Specification for Flexible Pipe Ancillary Equipment |
| API SPEC 16F:2017+ADD 1:2021 | Specification for Marine Drilling Riser Equipment |
| API RP 17L2:2021 | Recommended Practice for Ancillary Equipment for Flexible Pipes and Subsea Umbilicals |
| ISO 6507-1:2005 | Metallic materials — Vickers hardness test — Part 1: Test method |
| API 75 : 2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASME B31.1 : 2016 | POWER PIPING |
| ISO 15590-1:2009 | Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends |
| API 17F : 2014 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| ASTM A 537/A537M : 2013 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| ISO 9712:2012 | Non-destructive testing — Qualification and certification of NDT personnel |
| API 5CT : 2012 | CASING AND TUBING |
| API TR 6AF2 : 2013 | TECHNICAL REPORT ON CAPABILITIES OF API INTEGRAL FLANGES UNDER COMBINATION OF LOADING - PHASE 2 |
| API TR 6AF1 : 1998 | TECHNICAL REPORT ON TEMPERATURE DERATING ON API FLANGES UNDER COMBINATION OF LOADING |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| ISO 4885:2017 | Ferrous materials — Heat treatments — Vocabulary |
| ISO 6892:1998 | Metallic materials — Tensile testing at ambient temperature |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASME B31.3:2016 | PROCESS PIPING |
| ISO 783:1999 | Metallic materials — Tensile testing at elevated temperature |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| ISO 17776:2016 | Petroleum and natural gas industries — Offshore production installations — Major accident hazard management during the design of new installations |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| API 6AM : 1995 | TECHNICAL REPORT ON MATERIAL TOUGHNESS |
| API 5L : 2012 | LINE PIPE |
| ISO 15579:2000 | Metallic materials — Tensile testing at low temperature |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
| API 7-1 : 2006 : ADD 3:2011(R2015) | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| API RP 16Q : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
| ISO 2566-1:1984 | Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| API 9B : 2015 | APPLICATION, CARE, AND USE OF WIRE ROPE FOR OIL FIELD SERVICE |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| API 5C3 : 1994 | BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES |
| ISO 10432:2004 | Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment |
| MSS SP 75 : 2014 | HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ISO 9327-1:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| API 6AF : 2008 | TECHNICAL REPORT ON CAPABILITIES OF API FLANGES UNDER COMBINATIONS OF LOAD |
| ISO 13628-5:2009 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals |
| ISO 10945:1994 | Hydraulic fluid power — Gas-loaded accumulators — Dimensions of gas ports |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| API 1110 : 2013 | RECOMMENDED PRACTICE FOR THE PRESSURE TESTING OF STEEL PIPELINES FOR THE TRANSPORTATION OF GAS, PETROLEUM GAS, HAZARDOUS LIQUIDS, HIGHLY VOLATILE LIQUIDS, OR CARBON DIOXIDE |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 21329:2004 | Petroleum and natural gas industries — Pipeline transportation systems — Test procedures for mechanical connectors |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| API 5C5 : 2017 | PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
| API 1111 : 2015 | DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.