AS 1199.1-2003
Current
The latest, up-to-date edition.
Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
28-07-2003
Specifies an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL). This Standard is identical with and reproduced from ISO2859-1:1999.
Committee |
QR-008
|
DocumentType |
Standard
|
ISBN |
0 7337 5391 4
|
Pages |
87
|
ProductNote |
Reconfirmed 22/07/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 22/07/2016
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
1.1 This part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL).Its purpose is to induce a supplier through the economic and psychological pressure of lot non-acceptance to maintain a process average at least as good as the specified acceptance quality limit, while at the same time providing an upperlimit for the risk to the consumer of accepting the occasional poor lot.Sampling schemes designated in this part of ISO 2859 are applicable, but not limited, to inspection of- end items,- components and raw materials,- operations,- materials in process,- supplies in storage,- maintenance operations,- data or records, and- administrative procedures.1.2 These schemes are intended primarily to be used for a continuing series of lots, that is, a series long enough to allow the switching rules (9.3) to be applied. These rules provide:a) a protection to the consumer (by means of a switch to tightened inspection or discontinuation of sampling inspection) should a deterioration in quality be detected;b) an incentive (at the discretion of the responsible authority) to reduce inspection costs (by means of a switch to reduced inspection) should consistently good quality be achieved.Sampling plans in this part of ISO 2859 may also be used for the inspection of lots in isolation but, in this case the user is strongly advised to consult the operating characteristic curves to find a plan that will yield the desired protection (see 12.6). In that case, the user is also referred to the sampling plans indexed by limiting quality (LQ) given in ISO 2859-2.
Standards | Relationship |
ISO 2859-1:1999 | Identical |
Originated as AS 1199-1972.
Previous edition AS 1199-1988.
Revised and redesignated as AS 1199.1-2003.
AS 4647-2011 | Diaphragm gas meters |
AS 2944.2-2007 | Plastics pipes and fittings for gas reticulation Polyamide fittings (Reconfirmed 2023) |
AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
AS 1604.1-2005 | Specification for preservative treatment Sawn and round timber |
AS 4145.2-2008 | Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings |
AS 1085.14-2012 | Railway track material Prestressed concrete sleepers |
AS 1599-2006 | Pressure-sensitive and water activated adhesive tape for packaging and office applications |
AS 3571.2-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD) |
AS 3585-2008 | End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019) |
AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
AS 3565.4-2007 | Meters for cold and heated drinking and non-drinking water supplies In-service compliance testing (Reconfirmed 2019) |
AS/NZS 1254:2010 | PVC-U pipes and fittings for stormwater and surface water applications (Reconfirmed 2024) |
AS/NZS 1576.2:2016 | Scaffolding Couplers and accessories |
AS/NZS 2080:2006 | Safety glazing for land vehicles |
AS 5100.5-2004 | Bridge design Concrete |
AS/NZS 1577:2013 | Scaffold decking components |
AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
AS/NZS 4455.1:2008 | Masonry units, pavers, flags and segmental retaining wall units Masonry units (Reconfirmed 2020) |
AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
AS 1901-2004 | Electroplated coatings - Gold and gold alloys |
AS 2309-2008 | Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applications - Atmospheric |
AS ISO 10017-2006 | Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) |
AS 4049.4-2006 | Paints and related materials - Pavement marking materials High performance pavement marking systems |
AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications (Reconfirmed 2024) |
AS 1646.4-2005 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates |
AS/NZS 1163:2016 | Cold-formed structural steel hollow sections |
AS 2321-2006 | Short-link chain for lifting purposes |
AS 2703-2008 | Vehicle loop detector sensors |
AS 1406-2004 | Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017) |
AS 4797-2009 | Stainless steel chain for lifting purposes (Reconfirmed 2019) |
AS 5039-2008 | Security screen doors and security window grilles |
AS 5074-2009 | Natural latex rubber condoms - Requirements and test methods |
AS 1597.2-2013 | Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height) |
AS 681.3-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber |
AS/NZS 2009:2006 | Glass beads for pavement-marking materials (Reconfirmed 2016) |
AS 4125.1-2009 | Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management |
AS 1085.20-2006 | Railway track material - Part 20: Welding of steel rail |
AS/NZS 4677:2010 | Steel utility services poles |
AS 2439.1-2007 | Perforated plastics drainage and effluent pipe and fittings Perforated drainage pipe and associated fittings |
AS 6669:2016 | Plywood - Formwork |
AS 1447-2007 | Hot-rolled spring steels (Reconfirmed 2017) |
AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
AS 2001.2.25.4-2006 | Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Assessment of appearance change |
AS 2080:2019 | Safety glazing for land vehicles |
AS 4176.8-2010 | Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD) |
AS 4672.1:2007 | Steel prestressing materials General requirements |
AS 4181-2013 | Repair and off-take clamps for water industry purposes (Reconfirmed 2023) |
AS/NZS 1605.1:2018 | Methods for sampling and analysing timber preservatives and preservative-treated timber General requirements, sampling, and determination of sapwood and heartwood presence |
AS 4256.1-2006 | Plastic roof and wall cladding materials General requirements (Reconfirmed 2018) |
AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
AS/NZS 4999:2006 | PVC-U maintenance shafts |
AS/NZS 1576.2:2009 | Scaffolding Couplers and accessories |
AS/NZS 3879:2006 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings |
AS/NZS 4998:2009 | Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022) |
AS 1085.20-2012 | Railway track material Welding of steel rail |
AS 3775.1-2004 | Chain slings - Grade T Product specification |
AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
AS/NZS 2728:2013 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
AS 5082.2-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
AS 681.1-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
AS/NZS 4065:2010 | Concrete utility services poles |
AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
AS 1418.10(INT)-2004 | Cranes, hoists and winches Elevating work platforms |
AS 4506-2005 | Metal finishing - Thermoset powder coatings (Reconfirmed 2017) |
AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
AS/NZS 2642.1:2007 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe extrusion compounds (Reconfirmed 2024) |
AS 3743-2003 | Potting mixes |
AS 2001.2.25.3-2006 | Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of mass loss |
AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
AS 2439.2-2007 | Perforated plastics drainage and effluent pipe and fittings Perforated effluent pipe and associated fittings for sewerage applications |
AS 5081-2008 | Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016) |
AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
AS/NZS 4067:2004 | Firefighters' helmets |
AS 1443-2004 | Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022) |
AS/NZS 2210.5:2009 | Occupational protective footwear Specification for occupational footwear (ISO 20347:2004, MOD) |
AS 4956-2008 | Air valves for water supply |
AS 4176.2-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
AS/NZS 4455.2:2010 | Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020) |
AS/NZS 3679.1:2016 | Structural steel Hot-rolled bars and sections |
AS 1638-2008 | Motor vehicles - Light alloy road wheels |
AS 4256.2-2006 | Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets (Reconfirmed 2018) |
AS 2854-2004 | Tinplate cans for general use |
AS 4883-2008 | Air valves for sewerage |
AS 2943-2007 | Plastics pipes and fittings for gas reticulation - Polyamide compounds (Reconfirmed 2022) |
AS 2905-2005 | Steel drums |
AS 4606-2012 | Grade S fire resistant and antistatic requirements for conveyor belting and conveyor accessories (Reconfirmed 2024) |
AS 4049.2-2005 | Paints and related materials - Pavement marking materials Thermoplastic pavement marking materials - For use with surface applied glass beads |
AS ISO 8009-2009 | Mechanical contraceptives - Reusable natural and silicone rubber contraceptive diaphragms - Requirements and tests |
AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
AS 681.2-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
AS 4176.7-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD) |
AS 4883:2017 | Air valves for sewerage |
AS/NZS 4357.0:2005 | Structural laminated veneer lumber Specifications (Reconfirmed 2016) |
AS 1856-2004 | Electroplated coatings - Silver |
AS 4256.4-2006 | Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards (Reconfirmed 2018) |
AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS 3600:2018 | Concrete structures |
AS 681.4-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
AS/NZS 4944:2006 | Gas meters - In-service compliance testing (Reconfirmed 2017) |
AS 4397-2007 | Electroplated coatings of zinc on steel fasteners with imperial threads |
AS 1192-2004 | Electroplated coatings - Nickel and chromium (Reconfirmed 2017) |
AS/NZS 2041.4:2010 | Buried corrugated metal structures Helically formed sinusoidal pipes |
AS 6669-2007 | Plywood - Formwork |
AS 1450-2007 | Steel tubes for mechanical purposes (Reconfirmed 2017) |
AS 2429-2004 | Electroplated coatings of rhodium for general engineering applications |
AS/NZS 2210.3:2009 | Occupational protective footwear Specification for safety footwear (ISO 20345:2004, MOD) |
AS 4454-2003 | Composts, soil conditioners and mulches |
AS/NZS 2728:2007 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
AS 5082.1-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications (Reconfirmed 2017) |
AS 5100.5:2017 | Bridge design Concrete |
AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
AS 3680-2008 | Polyethylene sleeving for ductile iron piping (Reconfirmed 2021) |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS/NZS 4765:2017 | Modified PVC (PVC-M) pipes for pressure applications |
AS 2770-2005 | Measuring cylinders - Plastics - Graduated |
AS/NZS 2269:2004 | Plywood - Structural |
AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
AS 3600-2009 | Concrete structures |
AS/NZS 4131:2010 | Polyethylene (PE) compounds for pressure pipes and fittings (Reconfirmed 2022) |
AS/NZS 1577:2018 | Scaffold decking components |
AS/NZS 1605.1:2006 | Methods for sampling and analysing timber preservatives and preservative-treated timber General requirements, sampling, and determination of sapwood and heartwood presence |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS 5588-2013 | Grapevine propagation material |
AS 3571.1-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD) |
AS 4738.1-2007 | Metal castings Ferrous sand moulded |
AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
AS 4738.1-2004 | Metal castings Ferrous sand moulded |
AS 1138-2008 | Thimbles for wire rope (Reconfirmed 2019) |
AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
AS 4371-2012 | Ceramic tableware |
AS/NZS 4455.3:2008 | Masonry units, pavers, flags and segmental retaining wall units Segmental retaining wall units (Reconfirmed 2020) |
AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 4285-2007 | Skylights |
AS/NZS 2272:2006 | Plywood - Marine (Reconfirmed 2016) |
AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS 4314-2005 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
AS 4256.3-2006 | Plastic roof and wall cladding materials Glass fibre reinforced polyester (GRP) (Reconfirmed 2018) |
AS/NZS 2642.2:2008 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022) |
AS/NZS 3679.2:2010 | Structural steel Welded I sections |
AS 4256.5-2006 | Plastic roof and wall cladding materials Polycarbonate (Reconfirmed 2018) |
AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS/NZS 2210.4:2009 | Occupational protective footwear Specification for protective footwear (ISO 20346:2004, MOD) |
AS 2001.2.25.2-2006 | Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of specimen breakdown |
AS 2453-2004 | Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017) |
AS 1666.1-2009 | Wire-rope slings Product specification (Reconfirmed 2019) |
AS 3996-2006 | Access covers and grates |
AS 3705-2003 | Geotextiles - Identification, marking, and general data |
AS/NZS 4179:2014 | Single-use sterile rubber surgical gloves - Specification (ISO 10282:2014, MOD) |
AS 2944.1-2007 | Plastics pipes and fittings for gas reticulation Polyamide pipes (Reconfirmed 2023) |
AS 3818.1-2003 | Timber - Heavy structural products - Visually graded General requirements |
AS 4169-2004 | Electroplated coatings - Tin and tin alloys (ISO 2093:1986, MOD) (Reconfirmed 2017) |
AS/NZS 2269.0:2008 | Plywood - Structural Specifications |
AS/NZS 4130:2009 | Polyethylene (PE) pipes for pressure applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.