AS 1399-1990
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-05-2024
01-01-1990
Provides guidance for the use of sampling procedures and tables for the inspection by attributes given in AS 1199. Explains the terms used in the range of schemes available. Discusses some of the theoretical basis for sampling inspection.
Committee |
QR-008
|
DocumentType |
Standard
|
ISBN |
0 7262 6045 2
|
Pages |
57
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard gives information on methods of acceptance sampling inspection with particular reference to the sampling procedures and tables for inspection by attributes, given in AS 1199. It explains the terms used, describes the various schemes and plans, gives practical advice on sampling inspection and discusses some of the theoretical aspects. This Standard applies only to sampling for inspection by attributes, that is, where the process being sampled yields items, results, or data which are classified as 'pass/fail; go/no go; conforming/nonconforming'; etc. The techniques and procedures of sampling for inspection by variables are not the concern of this Standard nor of AS 1199, these are dealt with in AS 2490, and related ISO, BS and US Standards. Clause (2.3) discusses the difference between these two types of inspection.
Under Revision see DR 03246 CP
AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
AS/NZS 3750.15:1998 | Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013) |
AS 3750.18-2002 | Paints for steel structures Moisture cure urethane (single-pack) systems |
AS 2497.1-2001 | Procedures for acceptance testing of refractory products Batch procedure (Reconfirmed 2013) |
AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
AS 4130(INT)-1993 | PE pipes, pressure applications |
AS 4429(INT)-1996 | Methods of test and rating requirements for smoke-spill fans |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS/NZS 3750.8:1994 | Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013) |
AS 1604.1-2005 | Specification for preservative treatment Sawn and round timber |
AS/NZS 1605:1998 | Methods for sampling and analysing timber preservatives and preservative-treated timber |
AS 1418.10-1996 | Cranes (including hoists and winches) - Elevating work platforms |
AS 2490-1997 | Sampling procedures and charts for inspection by variables for percent nonconforming |
AS 1324.1-1996 | Air filters for use in general ventilation and airconditioning - Application, performance and construction |
AS/NZS 1859.3:1996 | Reconstituted wood-based panels Decorative overlaid wood panels |
AS 1952-1986 | Dispensing measures - Pharmaceutical - Glass |
AS 1380.1-1998 | Fibre-rope slings - Product specification |
AS/NZS 2908.1:2000 | Cellulose-cement products Corrugated sheets (Reconfirmed 2020) |
AS 1617.1-2003 | Refractory bricks and shapes Fireclay |
AS 4139-1993 | Fibre-reinforced concrete pipes and fittings |
AS 2076-1996 | Wire-rope grips for non-lifting applications |
AS 3582.2-2001 | Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
AS 4751(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous open sections |
AS 1085.16-1995 | Railway permanent way material - Part 16: Cast sleeper plates |
AS 2740-2001 | Wedge-type sockets |
AS 3777-1990 | Shank hooks and large-eye hooks - Maximum 25 t |
AS/NZS 1859.1:1997 | Reconstituted wood-based panels Particleboard |
AS/NZS 1859.2(INT):1995 | Reconstituted wood-based panels Medium density fibreboard (MDF) |
AS 1273-1991 | Unplasticized PVC (UPVC) downpipe and fittings for rainwater (Reconfirmed 2018) |
AS 3862-1991 | External fusion-bonded epoxy coating for steel pipes |
AS/NZS 4380:2001 | Motor vehicles - Cargo restraint systems - Transport webbing and components |
AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
AS 4219-1994 | Timber - Stumps and sole plates |
AS 1085.10-2002 | Railway track material Rail anchors |
AS/NZS 2009:2002 | Glass beads for pavement-marking materials |
AS 3582.3-1994 | Supplementary cementitious materials for use with portland cement - Silica fume |
AS 3582.2-1991 | Supplementary cementitious materials for use with portland cement Slag - Ground granulated iron blast-furnace |
AS/NZS 4256.5:1996 | Plastic roof and wall cladding materials Polycarbonate |
AS 3894.3-1993 | Site testing of protective coatings - Determination of dry film thickness |
AS 1085.13-1998 | Railway permanent way material - Part 13: Spring fastening spikes for sleeper plates |
AS 2319-2001 | Rigging screws and turnbuckles |
AS/NZS 4158.1:1994 | Polymeric coatings on valves and fittings for water industry purposes Thermal-bonded coatings |
AS 1438.1-1998 | Wire-coil flat slings Product specification |
AS/NZS 2904:1995 | Damp-proof courses and flashings |
AS 3518.1-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes |
AS 1741-1991 | Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018) |
AS 1332-2000 | Conveyor belting - Textile reinforced (Reconfirmed 2016) |
AS 2105-1992 | Inorganic zinc silicate paint |
AS 1085.13-2002 | Railway track material Spring fastening spikes for sleeper plates (Reconfirmed 2013) |
AS/NZS 4389:1996 | Safety mesh |
AS 1410-2003 | Sterilizers - Steam - Pre-vacuum |
AS 2698.1-1984 | Plastics pipes and fittings for irrigation and rural applications Polyethylene micro-irrigation pipe |
AS 1163-1991 | Structural steel hollow sections |
AS 2423-2002 | Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021) |
AS 1085.12-1999 | Railway permanent way materials - Part 12: Insulated joint assemblies |
AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
AS 1353.1-1997 | Flat synthetic-webbing slings Product specification (Reconfirmed 2014) |
AS 2947.3-1995 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Couplings |
AS 2047-1999 | Windows in buildings - Selection and installation |
AS 1478-1992 | Chemical admixtures for concrete |
AS 1138-1992 | Thimbles for wire rope |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS/NZS 3809:1998 | Safes and strongrooms |
AS 4049.2-1994 | Paints and related materials - Road marking materials - Thermoplastic road marking materials |
AS 2766-1997 | Petri dishes - Plastic - For single use |
AS 3750.2-1994 | Paints for steel structures - Ultra high-build paint |
AS/NZS 2179.2(INT):1998 | Specifications for rainwater goods, accessories and fasteners - PVC rainwater goods and accessories |
AS 1579-1993 | Arc welded steel pipes and fittings for water and waste water |
AS/NZS 2080:1995 | Safety glass for land vehicles |
AS 1085.18-2003 | Railway track material Screw spikes and threaded inserts |
AS 1333-1994 | Conveyor belting of elastomeric and steel cord construction (Reconfirmed 2019) |
AS 1731.2-2000 | Refrigerated display cabinets General mechanical and physical requirements |
AS/NZS 4604:1999 | Security window grilles |
AS/NZS 2272:1996 | Plywood - Marine |
AS 1085.7-1994 | Railway permanent way material - Part 7: Spring washers |
AS 1669-1992 | Transmission belting - Frictioned surface |
AS 1085.1-1995 | Railway permanent way material - Part 1: Steel rails |
AS 1397-1993 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 4131(INT)-1993 | PE pipe compounds |
AS/NZS 3582.3:2002 | Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS/NZS 4266.1:1996 | Reconstituted wood-based panels - Methods of test Sampling, cutting and conditioning for tests |
AS/NZS 4256.1:1994 | Plastic roof and wall cladding materials General requirements |
AS 1077-1992 | Single-use syringes (sterile) for the injection of 100 units per millilitre insulin (U-100) |
AS/NZS 1260:1996 | PVC pipes and fittings for drain, waste and vent applications |
AS 1918-1992 | Methods for sampling eggs and egg products |
AS 4750(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous hollow sections |
AS/NZS 1518:2002 | External extruded high-density polyethylene coating system for pipes (Reconfirmed 2016) |
AS/NZS 1314:2003 | Prestressing anchorages (Reconfirmed 2016) |
AS 1085.17-2003 | Railway Track Material Steel Sleepers (Reconfirmed 2013) |
AS 3975-1991 | Aluminium alloys - Irrigation tube |
AS 4454-1999 | Compost, soil conditioners and mulches |
AS/NZS 4371:1996 | Ceramic tableware |
AS 2492-1994 | Cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
AS 3674-1989 | Storage of microfilm |
AS/NZS 4256.3:1994 | Plastic roof and wall cladding materials Glass fibre reinforced polyester (GRP) |
AS/NZS 4256.2:1994 | Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets |
AS 3879(INT)-1991 | Solvent cements and priming fluids for use with unplasticized PVC (UPVC) pipes and fittings |
AS/NZS 3750.13:1997 | Paints for steel structures Epoxy primer (two-pack) |
AS/NZS 2343:1997 | Bullet-resistant panels and elements |
AS/NZS 3879:1995 | Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings |
AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
AS/NZS 1748:1997 | Timber - Stress-graded - Product requirements for mechanically stress-graded timber |
AS 3775.1-2004 | Chain slings - Grade T Product specification |
AS/NZS 4576:1995 | Guidelines for scaffolding |
AS/NZS 4380:1996 | Cargo restraint systems - Webbing load restraint systems |
AS/NZS 4740:2000 | Natural ventilators - Classification and performance (Reconfirmed 2016) |
AS 4187-1994 | Code of practice for cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities |
AS 1085.2-2002 | Railway track material Fishplates |
AS/NZS 4792:1999 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process |
AS/NZS 1477:1996 | PVC pipes and fittings for pressure applications |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS 1442-1992 | Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products |
AS 1085.3-2002 | Railway track material Sleeper plates (Reconfirmed 2013) |
AS/NZS 4345:2001 | Motor vehicles - Cargo restraint systems - Transport fibre rope |
AS 2224.2-1986 | Medicine measures (including paediatric droppers) Plastics - For domestic use |
AS 1472-2003 | Carbon steel spring wire for mechanical springs |
AS 1463-1988 | Polyethylene pipe extrusion compounds |
AS 4113.1-1993 | Traffic signal lamps - Lamps for 240 V a.c. operation |
AS 2518-1992 | Fusion-bonded low-density polyethylene coating for pipes and fittings |
AS 2908.1-1992 | Cellulose-cement products Corrugated sheets |
AS 3518.2-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings |
AS 1085.14-2003 | Railway track material Prestressed concrete sleepers |
AS 4985-2002 | Collection and stabilization of urine samples for quantitation of trace and toxic elements |
AS 3691-1989 | Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings |
AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
AS 1366.1-1992 | Rigid cellular plastics sheets for thermal insulation Rigid cellular polyurethane (RC/PUR) (Reconfirmed 2018) |
AS/NZS 4130:1997 | Polyethylene (PE) pipes for pressure applications |
AS 2908.2-1992 | Cellulose-cement products - Flat sheets |
AS/NZS 3750.11:1996 | Paints for steel structures - Chlorinated rubber - High-build and gloss |
AS 1085.8-1995 | Railway permanent way material Dogspikes |
AS/NZS 4131:1997 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS 2209-1994 | Timber - Poles for overhead lines |
AS/NZS 3750.4:1994 | Paints for steel structures Bitumen paint (Reconfirmed 2013) |
AS 3743-1993 | Potting mixes |
AS 1085.4-2002 | Railway track material Fishbolts and nuts (Reconfirmed 2013) |
AS/NZS 4158:1996 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes |
AS 1366.4-1989 | Rigid cellular plastics sheets for thermal insulation Rigid cellular polystyrene - Extruded (RC/PS-E) (Reconfirmed 2018) |
AS/NZS 2269:1994 | Plywood - Structural |
AS/NZS 4266.1:1995 | Reconstituted wood-based panels - Methods of test Sampling, cutting and conditioning for tests |
AS/NZS 1859.4:1997 | Reconstituted wood-based panels Hardboard |
AS 4186-1994 | Screwcap bottles for microbiological use (McCartney bottles) |
AS 4441(INT)-1996 | Oriented PVC (OPVC) pipes for pressure applications |
AS/NZS 4200.1:1994 | Pliable building membranes and underlays Materials |
AS 1604-1997 | Timber - Preservative-treated - Sawn and round |
AS/NZS 1221:1997 | Fire hose reels (Reconfirmed 2020) |
AS 4497.1-1997 | Roundslings - Synthetic fibre Product specification |
AS 1067.1-1990 | Sunglasses and fashion spectacles Safety requirements |
AS/NZS 1859.1(INT):1995 | Reconstituted wood-based panels - Particleboard |
AS/NZS 4386.1:1996 | Domestic kitchen assemblies Kitchen units |
AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
AS/NZS 4791:1999 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process |
AS/NZS 1605:2000 | Methods for sampling and analysing timber preservatives and preservative-treated timber |
AS 4187-1998 | Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities |
AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
AS 2055.1-1985 | PVC sheet floor-covering - Unbacked, flexible |
AS 3508.4-1992 | Printed board assemblies - Acceptability of printed boards and soldered joints - Pictorial representation |
AS/NZS 4065:2000 | Concrete utility services poles |
AS/NZS 2699.3:2000 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS 3996-1992 | Metal access covers, road grates and frames |
AS 2913-2000 | Evaporative airconditioning equipment (Reconfirmed 2016) |
AS 5039-2003 | Security screen doors and security window grilles |
AS 2266-2002 | Carbon steel spring wire for bedding and seating |
AS 2224.1-1986 | Medicine measures (including paediatric droppers) Glass - For general use |
AS 1443-1994 | Carbon steels and carbon-manganese steels - Cold-finished bars |
AS 1577-1993 | Scaffold planks |
AS/NZS 2588:1998 | Gypsum plasterboard (Reconfirmed 2016) |
AS/NZS 4357:1995 | Structural Laminated Veneer Lumber |
AS/NZS 3750.3:1994 | Paints for steel structures - Heat resisting - Exterior |
AS 1085.15-1995 | Railway permanent way material Aluminothermic rail welding |
AS/NZS 4677:2000 | Steel utility services poles |
AS/NZS 4256.4:1995 | Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall cladding boards |
AS 2819-1985 | Thermometers - Meteorological - Maximum, minimum and ordinary |
AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
AS/NZS 3750.14:1997 | Paints for steel structures High-build epoxy (two-pack) |
AS/NZS 4345:1995 | Cargo restraint systems - Transport fibre rope |
AS/NZS 3750.17:1998 | Paints for steel structures Etch primers (single pack and two-pack) (Reconfirmed 2013) |
AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
AS/NZS 1594:1997 | Hot-rolled steel flat products |
AS 1085.4-1999 | Railway permanent way material - Part 4: Fishbolts and nuts |
AS 3894.3-2002 | Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013) |
AS 3724-1994 | Fibreboard boxes for the export of meat, meat products and offal (Reconfirmed 2016) |
AS 2698.3-1990 | Plastics pipes and fittings for irrigation and rural applications Mechanical joint fittings for use with polyethylene micro-irrigation pipes (Reconfirmed 2017) |
AS 4290-2000 | Design and installation of Revolving doors |
AS 2093-1977 | Salt for use in the manufacture of dairy products |
AS 4142.2-1993 | Fibre ropes Three-strand hawser-laid and eight-strand plaited |
AS/NZS 1595:1998 | Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016) |
AS 2703-1987 | Vehicle loop detector sensors |
AS/NZS 4344:1995 | Cargo restraint systems - Transport chain and components |
AS 1085.14-1997 | Railway permanent way material Prestressed concrete sleepers |
AS 4429-1999 | Methods of test and rating requirements for smoke-spill fans (Reconfirmed 2016) |
AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
AS/NZS 2699.3:2002 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS 4454-1997 | Composts, soil conditioners and mulches |
AS 3582.1-1998 | Supplementary cementitious materials for use with portland and blended cement Fly ash |
AS 2317-1998 | Collared eyebolts |
AS/NZS 4344:2001 | Motor vehicles - Cargo restraint systems - Transport chain and components |
AS/NZS 2699.2:2000 | Built-in components for masonry construction Connectors and accessories |
AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
AS 1332-1991 | Conveyor belting - Textile reinforced |
AS 1666.1-1995 | Wire-rope slings - Product specification |
AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
AS 4049.1-1992 | Paints and related materials - Road marking materials Solvent-borne paint - For use with drop-on beads |
AS 4198-1994 | Precast concrete access chambers for sewerage applications |
AS 1085.7-2003 | Railway track material Spring washers (Reconfirmed 2013) |
AS 2216-1997 | Packaging for poisonous substances |
AS 1085.1-2000 | Railway permanent way material Steel rails |
AS 1717-1975 | Unitized microfilm carriers (35mm) |
AS/NZS 4455:1997 | Masonry units and segmental pavers |
AS 1394-2001 | Round steel wire for ropes |
AS/NZS 2280:1995 | Ductile iron pressure pipes and fittings |
AS 1231-2000 | Aluminium and aluminium alloys - Anodic oxidation coatings |
AS 1085.19-2003 | Railway track material Resilient fastening assemblies (Reconfirmed 2013) |
AS/NZS 1859.2:1997 | Reconstituted wood-based panels - Medium density fibreboard (MDF) |
AS/NZS 3750.6:1995 | Paints for steel structures - Full gloss polyurethane (two-pack) |
AS 1366.2-1992 | Rigid cellular plastics sheets for thermal insulation Rigid cellular polyisocyanurate (RC/PIR) (Reconfirmed 2018) |
AS 3648-1993 | Specification and methods of test for packaged concrete mixes |
AS/NZS 4266.2:1995 | Reconstituted wood-based panels - Methods of test Determination of dimensions |
AS 1594-1992 | Hot-rolled steel flat products |
AS/NZS 3750.16:1998 | Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel (Reconfirmed 2013) |
AS 2321-2001 | Short-link chain for lifting purposes |
AS/NZS 3750.7:1994 | Paints for steel structures - Aluminium paint |
AS 1324.1-2001 | Air filters for use in general ventilation and airconditioning Application, performance and construction |
AS/NZS 1576.5:1995 | Scaffolding Prefabricated splitheads and trestles |
AS 3818.1-1998 | Timber - Heavy structural products - Visually graded General requirements |
AS/NZS 4129(INT):1997 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 2741-1992 | Shackles |
AS 1617.1-1993 | Refractory bricks and shapes Fireclay |
AS 1889.1-1984 | PVC floor tiles - Semi-rigid |
AS 1889.2-1985 | PVC floor tiles - Flexible |
AS/NZS 1516:1994 | The cement mortar lining of pipelines in situ (Reconfirmed 2020) |
AS 3743-1996 | Potting mixes |
AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
AS/NZS 4505:1998 | Domestic garage doors |
AS/NZS 2803.2:1995 | Doors - Security screen Sliding |
AS 3571-1989 | Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications |
AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
AS 3750.1-1994 | Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel |
AS 3771-1998 | Road lighting luminaires with integral control gear |
AS/NZS 4534:1998 | Zinc and zinc/aluminium-alloy coatings on steel wire |
AS/NZS 4290:1995 | Design and installation of revolving doors |
AS 1890-1999 | Thermally released links (Reconfirmed 2016) |
AS/NZS 2699.1:2000 | Built-in components for masonry construction Wall ties |
AS 1672.1-1997 | Limes and limestones Limes for building |
AS/NZS 4859.1:2002 | Materials for the thermal insulation of buildings General criteria and technical provisions |
AS 4113.2-1993 | Traffic signal lamps Lamps for a.c. operation at extra-low voltage |
AS 3585-1990 | End fittings for flat-webbing slings |
AS 4381-2002 | Single-use face masks for use in health care |
AS 1085.10-1995 | Railway permanent way material - Part 10: Rail anchors |
AS/NZS 2648.1:1995 | Underground marking tape Non-detectable tape (Reconfirmed 2020) |
AS 1604.1-2000 | Specification for preservative treatment Sawn and round timber |
AS 4285-1995 | Skylights |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 1597.2-1996 | Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height) |
AS 2620.1-1983 | Domestic garden hose - Reinforced hose |
AS 2212-1979 | Elastomeric hose and hose assemblies for transferring anhydrous ammonia |
AS/NZS 4049.3:1996 | Paints and related materials - Road marking materials - Waterborne paint - For use with drop-on beads |
AS 2636-1994 | Sampling of venous and capillary blood for the determination of lead or cadmium concentration |
AS/NZS 3750.5:1994 | Paints for steel structures - Acrylic full gloss (two-pack) |
AS 1085.12-2002 | Railway track material Insulated joint assemblies (Reconfirmed 2013) |
AS 1085.3-2000 | Railway permanent way material - Part 3: Sleeper plates |
AS 1517-1991 | Tinplate and blackplate |
AS/NZS 3679.2:1996 | Structural steel Welded I sections |
AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
AS/NZS 2041:1998 | Buried corrugated metal structures |
AS 1281-1993 | Cement mortar lining of steel pipes and fittings |
AS 4397-1996 | Electroplated coatings of zinc on steel fasteners with imperial threads |
AS/NZS 3750.10:1994 | Paints for steel structures Full gloss epoxy (two-pack) |
AS 2183-1991 | Flexible wrappings (including laminates) for rindless cheese |
AS/NZS 2208:1996 | Safety glazing materials in buildings |
AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS/NZS 4253:1994 | Mailboxes |
AS 4089-1993 | Priming paint for steel - Single component - General purpose |
AS 2741-2002 | Shackles (Reconfirmed 2014) |
AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
AS 1366.3-1992 | Rigid cellular plastics sheets for thermal insulation Rigid cellular polystyrene - Moulded (RC/PS - M) (Reconfirmed 2018) |
AS 3850-2003 | Tilt-up concrete construction |
AS 3679.2-1991 | Structural steel - Welded sections |
AS 3818.1-2003 | Timber - Heavy structural products - Visually graded General requirements |
AS/NZS 1859.5:1997 | Reconstituted wood-based panels Fibre insulating board (insulation board) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.