AS/NZS 3155:1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Approval and test specification - Electric cables - Neutral screened - For working voltages up to and including 0.6/1 kV
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
05-12-1995
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies the requirements for PVC and XLPE insulated neutral wire screened cables intended for use in electrical installations including overhead and underground lines at working voltages up to and including 0.6/1 kV.
| Committee |
EL-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0099 3
|
| Pages |
10
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Standard applies to PVC and XLPE insulated neutral wire screened cables intended for use in electrical installations including overhead and underground lines at working voltages up to and including 0.6/1 kV.NOTES:1 This Standard is intended to apply only to neutral screened cables of types provided for in the tables of construction and dimensions (Tables 2.1 and 2.2). It is not intended, however, that other types of neutral screened cables should be precluded from use and regulatory authorities may give approval to new types and sizes as they are developed.2 The Standard does not apply to concentric wire neutral XLPE insulated cables for electricity supply provided for in AS 1178.3 For New Zealand, the neutral screen of a 5-conductor cable may be used as an earth conductor.
First published in Australia as AS C155-1956.
Revised and redesignated AS 3155-1979.
Second edition 1986.
First published in New Zealand as NZS/AS 3155-1986.
Jointly revised and designated AS/NZS 3155:1995.
| AS/NZS 1660.2.5:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to cables above 1 kV (Reconfirmed 2017) |
| AS/NZS 3198:1996 | Approval and test specification - Electric cables - XLPE insulated - For working voltages up to and including 0.6/1 kV |
| AS/NZS 1660.5.1:2005 | Test methods for electric cables, cords and conductors Fire tests - Test for vertical flame spread of vertically-mounted bunched wires or cables |
| AS/NZS 1660.3:1998 | Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017) |
| AS/NZS 1660.2.2:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials (Reconfirmed 2017) |
| AS/NZS 1660.5.3:1998 | Test methods for electric cables, cords and conductors Fire tests - Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables |
| AS/NZS 1660.2.4:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to polyethylene and polypropylene materials (Reconfirmed 2017) |
| AS 3147-1992 | Approval and test specification - Electric cables - Thermoplastic insulated - For working voltages up to and including 0.6/1 kV |
| AS/NZS 1660.5.2:2006 | Test methods for electric cables, cords and conductors Fire tests - Measurement of smoke density of cables burning under defined conditions |
| AS 1178-1986 | Concentric wire neutral cables - XLPE insulated - For electricity supply at working voltages of 0.6/1 kV |
| AS/NZS 1660.4:1998 | Test methods for electric cables, cords and conductors Complete cable and flexible cord (Reconfirmed 2017) |
| AS 1125-1993 | Conductors in insulated electric cables and flexible cords |
| AS 1660.2-1986 | Methods of test for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths |
| AS/NZS 1660.5.4:1998 | Test methods for electric cables, cords and conductors - Fire tests - Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity |
| AS/NZS 1660.5.5:2005 | Test methods for electric cables, cords and conductors Fire tests - Circuit integrity |
| AS/NZS 1660.1:1998 | Test methods for electric cables, cords and conductors Conductors and metallic components (Reconfirmed 2017) |
| AS 3198-1990 | Approval and test specification - Electric cables - XLPE insulated - For working voltages up to and including 0.6/1 kV |
| AS/NZS 1660.2.1:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application (Reconfirmed 2017) |
| AS/NZS 1660.5.6:2005 | Test methods for electric cables, cords and conductors Fire tests - Test for vertical flame propagation for a single insulated wire or cable |
| AS/NZS 1660.2.3:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials (Reconfirmed 2017) |
| AS/NZS 1125:2001 | Conductors in insulated electric cables and flexible cords (Reconfirmed 2017) |
| AS/NZS 3018:2001 | Electrical installations - Domestic installations |
| AS/NZS 3018:1997 | Electrical installations - Domestic installations |
| AS 2067-1984 | Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV |
| AS/NZS 3808:1998 | Insulating and sheathing materials for electric cables |
| AS/NZS 3008.1.2:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions |
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3008.1.1:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS/NZS 3808:2000 | Insulating and sheathing materials for electric cables (Reconfirmed 2017) |
| SAA HB37.2-1993 | Handbook of Australian fire Standards Electrical equipment (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.