• Shopping Cart
    There are no items in your cart

AS/NZS 3500.3.2:1998

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

National plumbing and drainage Stormwater drainage - Acceptable solutions

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

29-05-2024

Published date

05-06-1998

€92.72
Excluding VAT

SECTION 1 - SCOPE AND GENERAL 1.1 SCOPE AND APPLICATION 1.2 REFERENCED DOCUMENTS 1.3 DEFINITIONS 1.4 NOTATION 1.5 STORMWATER DRAINAGE INSTALLATION PLANS 1.6 IDENTIFICATION 1.7 PROTECTION OF WORKS 1.8 POSITION AND MANNER OF DISCHARGESECTION 2 - MATERIALS AND PRODUCTS 2.1 SCOPE OF SECTION 2.2 SELECTION AND USE 2.3 ROOF DRAINAGE SYSTEM 2.4 STORMWATER DRAINS (NON-PRESSURE) 2.5 RISING MAINS (PRESSURE) 2.6 SUBSOIL DRAINS 2.7 JOINTS 2.8 VALVES 2.9 CONCRETE AND MORTAR 2.10 EMBEDMENT MATERIAL 2.11 TRENCH FILL 2.12 MISCELLANEOUS 2.13 FILTERS FOR SUBSOIL DRAINS 2.14 RE-USESECTION 3 - ROOF DRAINAGE SYSTEMS - DESIGN 3.1 SCOPE OF SECTION 3.2 GENERAL METHOD 3.3 METEOROLOGICAL CRITERIA 3.4 CATCHMENT AREA 3.5 EAVES-GUTTER SYSTEMS 3.6 VALLEY GUTTERS 3.7 BOX GUTTER SYSTEMS 3.8 SOAKERSSECTION 4 - ROOF DRAINAGE SYSTEMS - INSTALLATIONS 4.1 SCOPE OF SECTION 4.2 TRANSPORT, HANDLING AND STORAGE 4.3 THERMAL VARIATION 4.4 CORROSION 4.5 INSTALLATION AND TESTING 4.6 INSPECTION AND CLEANING 4.7 ALTERATIONS AND DISCONNECTION 4.8 EAVES GUTTERS 4.9 BOX GUTTERS 4.10 VALLEY GUTTERS 4.11 DOWNPIPES 4.12 OVERFLOW DEVICES OR MEASURES 4.13 JOINTS FOR METAL COMPONENTS 4.14 JOINTS FOR PVC COMPONENTS 4.15 JOINTS FOR OTHER COMPONENTS 4.16 SUPPORT SYSTEMSSECTION 5 - SURFACE DRAINAGE SYSTEMS - DESIGN 5.1 SCOPE OF SECTION 5.2 DESIGN METHODS 5.3 LAYOUT 5.4 NOMINAL METHOD 5.5 GENERAL METHODSECTION 6 - SUBSOIL DRAINAGE SYSTEMS - DESIGN 6.1 SCOPE OF SECTION 6.2 PURPOSE 6.3 TYPES 6.4 LAYOUT 6.5 DESIGN CONSIDERATIONSSECTION 7 - SURFACE AND SUBSOIL DRAINAGE SYSTEMS - INSTALLATION 7.1 SCOPE OF SECTION 7.2 GENERAL REQUIREMENTS 7.3 SITE STORMWATER DRAINS 7.4 SUBSOIL DRAINSSECTION 8 - SURFACE AND SUBSOIL DRAINAGE SYSTEMS - ANCILLARIES 8.1 SCOPE OF SECTION 8.2 PAVED SURFACES 8.3 POINT(S) OF CONNECTION 8.4 REFLUX VALVES 8.5 INSPECTION OPENINGS 8.6 STORMWATER PITS, INLET PITS AND ARRESTERS 8.7 SURCHARGE OUTLETS 8.8 JUNCTIONS 8.9 JUMP-UPS 8.10 ANCHOR BLOCKS 8.11 ON-SITE STORMWATER DETENTION (OSD) SYSTEMSSECTION 9 - PUMPED SYSTEMS 9.1 SCOPE OF SECTION 9.2 GENERAL 9.3 WET WELLS 9.4 PUMPS 9.5 RISING MAINS 9.6 ELECTRICAL CONNECTIONSECTION 10 - TESTING 10.1 SCOPE OF SECTION 10.2 DOWNPIPES AND DRAINS WITHIN OR UNDER BUILDINGS 10.3 TEST CRITERIAAPPENDICESA - REFERENCED AND RELATED DOCUMENTSB - SITE MIXED CONCRETE FOR MINOR WORKSC - STORMWATER DRAINAGE INSTALLATION PLANSD - GUIDELINES FOR RAINFALL INTENSITIESE - RAINFALL INTENSITIES FOR AUSTRALIA - FIVE MINUTES DURATIONF - RAINFALL INTENSITIES FOR NEW ZEALAND - 10 MINUTES DURATIONG - EXAMPLES OF ACCEPTABLE OVERFLOW MEASURES FOR EAVES GUTTERSH - GENERAL METHOD FOR DESIGN OF EAVES GUTTER SYSTEMS - EXAMPLEI - BOX GUTTER SYSTEMS GENERAL METHOD, DESIGN GRAPHS AND ILLUSTRATIONSJ - BOX GUTTER SYSTEMS GENERAL METHOD, EXAMPLESK - SURFACE DRAINAGE SYSTEMS - NOMINAL AND GENERAL METHODS, EXAMPLESL - EXAMPLE CALCULATION - PUMPED SYSTEM

Specifies acceptable solutions for roof, surface and subsoil drainage systems, to the point(s) of connection to the external stormwater drainage network.

Committee
WS-020
DocumentType
Standard
ISBN
0 7337 1984 8
Pages
156
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies acceptable solutions for materials and products, and design and installation of roof drainage systems, surface drainage systems and subsoil drainage systems to the point(s) of connection to the external stormwater drainage network.ApplicationThis Standard will be referenced in the Building Code of Australia by way of BCA Amendment 3 to be published by 1 July 1998, thereby superseding the previous editions, AS 2180 -1986 and AS 3500.3-1990, which will be withdrawn 12 months from the date of publication of this edition.

Originated in Australia in part as part of AS CS3-1931.
Previous editions AS 2180-1986 and AS 3500.3-1990.
AS 2180-1986 and AS 3500.3-1990 jointly revised, amalgamated and redesignated in part as AS 3500.3.2:1998.
Incorporating: Amdt 1-1998

AS 4058-1992 Precast concrete pipes (pressure and non-pressure)
AS 3972-1997 Portland and blended cements
AS 2865-1995 Safe working in a confined space
AS 1273-1991 Unplasticized PVC (UPVC) downpipe and fittings for rainwater (Reconfirmed 2018)
AS 3996-1992 Metal access covers, road grates and frames
AS/NZS 2179.2(INT):1998 Specifications for rainwater goods, accessories and fasteners - PVC rainwater goods and accessories
AS 3517-1995 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 3000-1986 Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules)
AS 2870-1996 Residential slabs and footings - Construction
AS 3578-1993 Cast iron non-return valves for general purposes
AS 1432-1996 Copper tubes for plumbing, gasfitting and drainage applications
AS 3673-1989 Malleable cast iron threaded pipe fittings
AS 4198-1994 Precast concrete access chambers for sewerage applications
AS 3648-1993 Specification and methods of test for packaged concrete mixes
AS/NZS 2280:1999 Ductile iron pressure pipes and fittings
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS/NZS 3879:1995 Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings
AS 2638-1991 Sluice valves for waterworks purposes
AS/NZS 4129(INT):1997 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020)
AS 2200-1978 Design charts for water supply and sewerage
AS 1866-1986 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes
AS 3579-1993 Cast iron wedge gate valves for general purposes
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS 1100.101-1992 Technical drawing General principles (Reconfirmed 2014)
AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 3571-1989 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications
AS 1304-1991 Welded wire reinforcing fabric for concrete
AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
AS 2878-1986 Timber - Classification into strength groups
AS 1834.1-1991 Material for soldering Solder alloys (Reconfirmed 2018)
AS 2439.1-1981 Perforated plastics drainage and effluent pipe and fittings - Perforated drainage pipe and associated fittings
AS 3725-1989 Loads on buried concrete pipes
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms
AS 4087-1996 Metallic flanges for waterworks purposes
AS 3600-1994 Concrete structures
AS 1628-1999 Water supply - Metallic gate, globe and non-return valves (Reconfirmed 2015)
AS/NZS 1477:1999 PVC pipes and fittings for pressure applications
AS 4060-1992 Loads on buried vitrified clay pipes (Reconfirmed 2018)
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 1631-1994 Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018)
AS 1289.E6.1-1981 Methods of testing soil for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material
AS 1254-1991 Unplasticized PVC (UPVC) pipes and fittings for storm and surface water applications
AS 1761-1985 Helical lock-seam corrugated steel pipes
AS 1650-1989 Hot-dipped galvanized coatings on ferrous articles
AS 1762-1984 Helical lock-seam corrugated steel pipes - Design and installation
AS 2032-1977 Code of practice for installation of UPVC pipe systems
AS 3680-1989 Polyethylene sleeving for ductile iron pipelines
AS 3705-1990 Geotextiles - Identification, marking, and general data
AS 1345-1995 Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018)
AS 1665-1992 Welding of aluminium structures
AS 1170.1-1981 Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads
AS/NZS 4130:1997 Polyethylene (PE) pipes for pressure applications
AS 3855-1994 Suitability of plumbing and water distribution systems products for contact with potable water
AS 1604-1997 Timber - Preservative-treated - Sawn and round
AS 2733-1984 Concrete masonry units
AS 2033-1980 Installation of polyethylene pipe systems
AS 4139-1993 Fibre-reinforced concrete pipes and fittings
AS 1302-1991 Steel reinforcing bars for concrete
AS 1741-1991 Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018)
AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS 1379-1997 Specification and supply of concrete
AS 1289.5.4.1-1993 Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS/NZS 2566.1:1998 Buried flexible pipelines Structural design
AS/NZS 1260:1999 PVC pipes and fittings for drain, waste and vent applications

AS/NZS 2179.2(INT):1998 Specifications for rainwater goods, accessories and fasteners - PVC rainwater goods and accessories
AS 2050-2002 Installation of roof tiles
ATS 5200.037.2-2005 Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems
HB 114:1998 Guidelines for the design of eaves and box gutters
AS/NZS 3500.5:2000 Plumbing and Drainage Domestic installations
AS 3500.3.1-1998 National plumbing and drainage Stormwater drainage - Performance requirements

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.