AS/NZS 3679.1:1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Structural steel Hot-rolled bars and sections
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
05-02-1996
Specifies requirements for the production and supply of hot-rolled structural steel bars and sections for general structural and engineering applications.
Committee |
BD-023
|
DocumentType |
Standard
|
ISBN |
0 7337 0197 3
|
Pages |
34
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies the requirements for the production and supply of hot-rolled structural steel bars and sections. For general structural and engineering applications, all grades specified in this Standard are suitable for -(a) welding in accordance with AS/NZS 1554; or(b) riveting and bolting as specified in AS 1538, AS 3990, AS 4100 and NZS 3404.This Standard does not cover the following:(i) Structural steel - hot-rolled plates, floorplates and slabs (see AS/NZS 3678), and welded I sections (see AS/NZS 3679.2).(ii) Steel plates for pressure equipment (see AS 1548).(iii) Structural steel hollow sections (see AS 1163).(iv) Carbon steels and carbon-manganese steels -hot-rolled bars and semifinished products (see AS 1442).(v) Steel reinforcing bars for concrete (see AS 1302).(vi) Structural and pressure vessel steel- Quenched and tempered plate (see AS 3597).NOTES:1 Guidelines to purchasers on requirements that should be specified by the purchaser and those that should or may be agreed on at the time of enquiry and order are given in Appendix A.2 Guidelines to various means for demonstrating compliance with this Standard are given in Appendix B.3 Guidelines on cold-bending of rounds, flats and squares during fabrication are given in Appendix C.
First published in Australia in part as AS A1-1925.
Second edition 1928.
AS A1-1928 redated AS A1-1931.
Revised and designated in part as AS A1-1940.
AS A1-1940 redated AS A1-1955.
AS A1-1955 redated AS A1-1956.
Fourth edition 1965.
AS A135 first published 1965.
AS A147 first published 1965.
AS A149 first published 1965.
AS A151 first published 1966.
AS A135-1965, AS A149-1965 and AS A151-1966 revised, amalgamated and redesignated AS A186-1971.
Second edition AS A147-1971.
AS A187 first published 1971.
AS A187-1971 revised and redesignated AS 1205-1972.
AS A186-1971 revised and redesignated AS 1204-1972.
AS A1-1965 revised and redesignated AS 1131-1973.
AS A147-1971 revised and redesignated AS 1227-1974.
Second edition AS 1131-1979.
Second edition AS 1204-1980.
Second edition AS 1205-1980.
Second edition AS 1227-1980.
AS 1131-1973, AS 1204-1980, AS 1205-1980 and AS 1227-1980 revised, amalgamated and redesignated in part as AS 3679-1990.
AS 1131-1979 withdrawn March 1990.
AS 1204-1980 withdrawn March 1990.
AS 1205-1980 withdrawn March 1990.
AS 1227-1980 withdrawn March 1990.
AS 3679-1990 revised and redesignated AS 3679.1-1990.
Jointly revised and designated AS/NZS 3679.1:1996.
AS 1050.12-1983 | Methods for the analysis of iron and steel Determination of nitrogen in steel (steam distillation titrimetric method) (Reconfirmed 2016) |
AS 1442-1992 | Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products |
AS 2062-1997 | Non-destructive testing - Penetrant testing of products and components |
AS 1391-1991 | Methods for tensile testing of metals |
AS/NZS 1554.1:1995 | Structural steel welding Welding of steel structures |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 1171-1998 | Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
AS K1.21-1965 | Methods for the sampling and analysis of iron and steel Cobalt in iron and steel (photometric method) |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 3597-1993 | Structural and pressure vessel steel - Quenched and tempered plate |
AS/NZS 3679.2:1996 | Structural steel Welded I sections |
AS K1.16-1961 | Methods for the sampling and analysis of iron and steel Determination of sulphur in steel (gravimetric method) |
AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS/NZS ISO 9004.1:1994 | Quality management and quality system elements Guidelines |
AS 1302-1991 | Steel reinforcing bars for concrete |
AS 1538-1988 | Cold-formed Steel Structures Code |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
AS 1544.2-2003 | Method for impact tests on metals Charpy V-notch (Reconfirmed 2017) |
AS 1213-1982 | Iron and steel - Methods of sampling |
AS/NZS ISO 9000.1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
AS 4100-1990 | Steel structures |
AS 1544.2-1989 | Methods for impact tests on metals Charpy V-notch |
AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS 1163-1991 | Structural steel hollow sections |
AS 1548-1995 | Steel plates for pressure equipment |
AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
AS 3995-1994 | Design of steel lattice towers and masts |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS/NZS 1554.3:2002 | Structural steel welding Welding of reinforcing steel |
AS/NZS 1576.1:2010 | Scaffolding General requirements |
AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
AS 4085-1992 | Automatic sliding door assemblies |
AS 2159-1995 | Piling - Design and installation |
AS 4425-1996 | Above ground burial structures |
AS 1138-1992 | Thimbles for wire rope |
AS/NZS 1100.501:2002 | Technical drawing Structural engineering drawing (Reconfirmed 2014) |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS EN 12079.1-2010 | Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD) |
AS/NZS 4677:2010 | Steel utility services poles |
AS/NZS 1554.2:2003 | Structural steel welding Stud welding (steel studs to steel) |
AS/NZS 1554.7:2006 | Structural steel welding Welding of sheet steel structures |
AS/NZS 4994.1(INT):2004 | Temporary roof edge protection for housing and residential buildings General requirements |
AS 5007-2007 | Powered doors for pedestrian access and egress (Reconfirmed 2018) |
AS/NZS 1576.2:2009 | Scaffolding Couplers and accessories |
AS 1154.1-2009 | Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
AS 1228-2006 | Pressure equipment - Boilers |
AS 3700-1998 | Masonry structures |
AS 2809.5-2001 | Road tank vehicles for dangerous goods Tankers for bitumen-based products |
AS 2159-2009 | Piling - Design and installation |
AS 2809.2-1999 | Road tank vehicles for dangerous goods - Tankers for flammable liquids |
AS 1418.1-2002 | Cranes, hoists and winches General requirements |
AS 5100.6-2004 | Bridge design Steel and composite construction |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 1228-1997 | Pressure equipment - Boilers |
AS 3637.1-2005 | Underground mining - Winding suspension equipment General requirements (Reconfirmed 2017) |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 3700-2001 | Masonry structures |
AS 2809.4-2001 | Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes |
AS 1577-1993 | Scaffold planks |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS/NZS 4677:2000 | Steel utility services poles |
AS 2809.2-2008 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
AS/NZS 3845:1999 | Road safety barrier systems |
AS 4290-2000 | Design and installation of Revolving doors |
AS/NZS 1576.3:1995 | Scaffolding Prefabricated and tube-and-coupler scaffolding |
AS 2327.1-2003 | Composite structures Simply supported beams |
AS 4254-2002 | Ductwork for air-handling systems in buildings |
AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
AS 2980-2004 | Qualification of welders for fusion welding of steels |
AS 1666.1-1995 | Wire-rope slings - Product specification |
AS/NZS 1554.5:2004 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 1210-1997 | Pressure vessels |
AS/NZS 1576.5:1995 | Scaffolding Prefabricated splitheads and trestles |
AS 3578-1993 | Cast iron non-return valves for general purposes |
AS 1138-2008 | Thimbles for wire rope (Reconfirmed 2019) |
AS/NZS 1554.1:2000 | Structural steel welding Welding of steel structures |
AS/NZS 3785.4:2002 | Underground mining - Shaft equipment Conveyances for vertical shafts |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS/NZS 2980:2007 | Qualification of welders for fusion welding of steels |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS/NZS 4496:1997 | Recommended practice for the colour coding of steel products (Reconfirmed 2016) |
AS/NZS 3679.2:1996 | Structural steel Welded I sections |
AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
AS 1666.1-2009 | Wire-rope slings Product specification (Reconfirmed 2019) |
AS 3996-2006 | Access covers and grates |
AS/NZS 4994.1:2009 | Temporary edge protection General requirements |
AS 6001-1999 | Working platforms for housing construction |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.