• There are no items in your cart

AS/NZS 4360:2004

AvailableSuperseded

AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Risk management

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

31-08-2004

IMPORTANT PURCHASING ADVICE

This Standard has an essential companion Handbook, HB 436 Risk Management Guidelines - Companion to AS/NZS 4360. The two documents are intended to be used together, with the Handbook providing important commentary, guidance and examples on the implementation of the Standard.

Provides a generic guide for managing risk. It may be applied to a wide range of activities or operations of any public, private or community enterprise, or group.

Committee
OB-007
DocumentType
Standard
ISBN
0 7337 5904 1
Pages
26
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

This Standard provides a generic guide for managing risk. This Standard may be applied to a very wide range of activities, decisions or operations of any public, private or community enterprise, group or individual. While the Standard has very broad applicability, risk management processes are commonly applied by organizations or groups and so, for convenience, the term ‘organization’ has been used throughout this Standard. This Standard specifies the elements of the risk management process, but it is not the purpose of this Standard to enforce uniformity of risk management systems. It is generic and independent of any specific industry or economic sector. The design and implementation of the risk management system will be influenced by the varying needs of an organization, its particular objectives, its products and services, and the processes and specific practices employed. This Standard should be applied at all stages in the life of an activity, function, project, product or asset. The maximum benefit is usually obtained by applying the risk management process from the beginning. Often a number of discrete studies are carried out at different times, and from strategic and operational perspectives. The process described here applies to the management of both potential gains and potential losses.

First published as AS/NZS 4360:1995.
Second edition 1999.
Third edition 2004.

HB 182-2003 ISO/TR 10200 Legal admissibility of microforms
07/30117272 DC : 0 BS ISO/IEC 27005 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY RISK MANAGEMENT
ISO/TR 27809:2007 Health informatics Measures for ensuring patient safety of health software
BS PAS 56(2003) : 2003 GUIDE TO BUSINESS CONTINUITY MANAGEMENT
AS/NZS ISO 9000:2006 Quality management systems - Fundamentals and vocabulary
CSA ISO/IEC 16085 : 2007 : R2012 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
CSA ISO/IEC 16085 : 2007 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
I.S. EN ISO 27799:2016 HEALTH INFORMATICS - INFORMATION SECURITY MANAGEMENT IN HEALTH USING ISO/IEC 27002
CEN/TS 15260:2006 Health informatics - Classification of safety risks from health informatics products
AS/NZS ISO 14004:2004 Environmental management systems - General guidelines on principles, systems and support techniques
DD ISO/TS 25238:2007 Health informatics. Classification of safety risks from health software
07/30162048 DC : 0 BS ISO/IEC 29382 - CORPORATE GOVERNANCE OF INFORMATION AND COMMUNICATION TECHNOLOGY
BS ISO/IEC 16085:2006 Systems and software engineering. Life cycle processes. Risk management
ANSI Z9.14 : 2014 TESTING AND PERFORMANCE-VERIFICATION METHODOLOGIES FOR VENTILATION SYSTEMS FOR BIOSAFETY LEVEL 3 (BSL-3) AND ANIMAL BIOSAFETY LEVEL 3 (ABSL-3) FACILITIES
04/30115151 DC : DRAFT JUNE 2004 ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT
CSA ISO/IEC 16085 : 2007 : R2017 SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT
CEN/TR 15640:2007 Health informatics - Measures for ensuring the patient safety of health software
TS 102 165-1 : 4.2.3 CYBER; METHODS AND PROTOCOLS; PART 1: METHOD AND PRO FORMA FOR THREAT, VULNERABILITY, RISK ANALYSIS (TVRA)
ISO/IEC 16085:2006 Systems and software engineering Life cycle processes Risk management
AS ISO 15489.2-2002 Records management Guidelines (Reconfirmed 2013)
AS/NZS ISO 14004:1996 Environmental management systems - General guidelines on principles, systems and supporting techniques
PD ISO/TR 27809:2007 Health informatics. Measures for ensuring patient safety of health software
ISO/TS 25238:2007 Health informatics Classification of safety risks from health software
API 780 : 2013 SECURITY RISK ASSESSMENT METHODOLOGY FOR THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
TR 187 002 : 3.1.1 TELECOMMUNICATIONS AND INTERNET CONVERGED SERVICES AND PROTOCOLS FOR ADVANCED NETWORKING (TISPAN); TISPAN NGN SECURITY (NGN SEC); THREAT, VULNERABILITY AND RISK ANALYSIS
DD CEN/TS 15260:2006 Health informatics. Classification of safety risks from health informatics products
TS 187 016 : 3.1.1 TELECOMMUNICATIONS AND INTERNET CONVERGED SERVICES AND PROTOCOLS FOR ADVANCED NETWORKING (TISPAN); NGN SECURITY; IDENTITY PROTECTION (PROTECTION PROFILE)
IEEE/ISO/IEC 16085-2006 ISO/IEC/IEEE International Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management
S.R. CWA 15929:2009 BEST PRACTICES FOR THE DESIGN AND DEVELOPMENT OF CRITICAL INFORMATION SYSTEMS
HB 18.2:2003 Guidelines for third-party certification and accreditation Standardization and related activities - General vocabulary
AS ISO 15489.1-2002 Records management General (Reconfirmed 2013)
AS ISO 14050-1999 Environmental management - Vocabulary
AS/NZS ISO 9000:2000 Quality management systems - Fundamentals and vocabulary
HB 436:2004 Risk Management Guidelines Companion to AS/NZS 4360:2004
S.R. CEN TR 15640:2007 HEALTH INFORMATICS - MEASURES FOR ENSURING THE PATIENT SAFETY OF HEALTH SOFTWARE
PD CEN/TR 15640:2007 Health informatics. Measures for ensuring the patient safety of health software

AS 3806-2006 Compliance programs
AS/NZS 60079.17:2009 Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD)
AS 1988.1-2006 Welding of ferrous castings - Steel castings
AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment
AS/NZS 3833:2007 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS 2476-2008 General fumigation procedures
AS 3892-2001 Pressure equipment - Installation (Reconfirmed 2016)
AS/NZS 4240.2:2009 Remote control systems for mining equipment Operation and maintenance for underground metalliferous mining (Reconfirmed 2021)
HB 323-2007 Employment screening handbook
AS/NZS 4645.3:2008 Gas distribution networks Plastics pipe systems
AS/NZS ISO 14343:2006 Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification (Reconfirmed 2017)
AS 1742.3-2002 Manual of uniform traffic control devices - Traffic control devices for works on roads
AS 4806.2-2006 Closed circuit television (CCTV) Application guidelines (Reconfirmed 2015)
AS 2187.2-2006 Explosives - Storage and use Use of explosives
AS/NZS 1554.4:2004 Structural steel welding - Welding of high strength quenched and tempered steels
AS 4292.5-2006 Railway safety management Operational systems
AS 3846-2005 The handling and transport of dangerous cargoes in port areas
AS 4700.5-2005 Implementation of Health Level Seven (HL7) Version 2.4 Immunization messages
AS 4967-2006 Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting
AS/NZS 1554.2:2003 Structural steel welding Stud welding (steel studs to steel)
AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
HB 328-2009 Mailroom security
AS 2865-2009 Confined spaces
AS 8001-2008 Fraud and corruption control
AS 6947-2009 Crossing of waterways by electricity infrastructure (Reconfirmed 2019)
AS/NZS 4994.2:2009 Temporary edge protection Roof edge protection - Installation and dismantling
AS 3776-2006 Lifting components for Grade T chain slings
AS/NZS 4855:2007 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
AS 4292.7-2006 Railway safety management Railway safety investigation
AS 4292.3-2006 Railway safety management Rolling stock
AS 1940-2004 The storage and handling of flammable and combustible liquids
AS 4811-2006 Employment screening
HB 436:2004 Risk Management Guidelines Companion to AS/NZS 4360:2004
AS/NZS 4645.1:2008 Gas distribution networks Network management
AS 8015-2005 Corporate governance of information and communication technology
AS/NZS 3584.3:2005 Diesel engine systems for underground coal mines - Maintenance
HB 246:2010 Guidelines for managing risk in sport and recreation organizations
AS 5059-2006 Power station cooling tower water systems - Management of legionnaires' disease health risk (Reconfirmed 2016)
AS 4292.4-2006 Railway safety management Signalling and telecommunications systems and equipment
AS/NZS 1158.3.1:2005 Lighting for roads and public spaces Pedestrian area (Category P) lighting - Performance and design requirements
AS 4292.2-2006 Railway safety management Track, civil and electrical infrastructure
AS/NZS ISO 17633:2006 Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004, MOD) (Reconfirmed 2017)
AS 4700.5(INT)-2007 Implementation of Health Level Seven (HL7) Version 2.5 Immunization messages
HB 408-2006 Corporate governance culture
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS 4457.1-2007 Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair Wheel assemblies and rim assemblies
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS 4292.1-2006 Railway safety management General requirements
AS 4772-2008 Earth-moving machinery - Quickhitches for excavators and backhoe loaders
AS/NZS 2865:2001 Safe working in a confined space
AS 2885.1-2007 Pipelines - Gas and liquid petroleum Design and construction
AS 4700.7-2005 Implementation of Health Level Seven (HL7) Version 2.3.1 Diagnostic imaging orders and results
HB 407-2006 Corporate governance for small business
HB 293-2006 Executive guide to business continuity management
AS 3873-2001 Pressure equipment - Operation and maintenance
AS/NZS 4240.1:2009 Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021)
HB 242-2007 High voltage mining equipment for use underground (Reconfirmed 2019)
AS 3533.2-2009 Amusement rides and devices Operation and maintenance
AS 1755-2000 Conveyors - Safety requirements
HB 158-2006 Delivering assurance based on AS/NZS 4360:2004 Risk Management
HB 304-2007 Guide to Australian electronic communication in health care
AS/NZS 2843.1:2006 Timber preservation plants Timber preservation plant site design (Reconfirmed 2016)
AS 5062-2006 Fire protection for mobile and transportable equipment
AS 2815.5-2006 Training and certification of occupational divers - Dive supervisor
AS/NZS 4967:2009 Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting
AS 3533.1-2009 Amusement rides and devices Design and construction
AS/NZS 1546.2:2008 On-site domestic wastewater treatment units Waterless composting toilets
HB 203:2006 Environmental risk management - Principles and process
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS/NZS ISO 18273:2006 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (Reconfirmed 2017)
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 4568-2005 Preparation of a safety and operating plan for gas networks
AS 1210-1997 Pressure vessels
AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas
HB 294:2006 National Post-Border Weed Risk Management Protocol
AS/NZS 4871.6:2007 Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment
AS/NZS 1554.3:2008 Structural steel welding Welding of reinforcing steel
AS 2550.1-2002 Cranes, hoists and winches - Safe use General requirements
AS/NZS 1873.1:2003 Powder-actuated (PA) hand-held fastening tools - Selection, operation and maintenance
HB 203:2004 Environmental risk management - Principles and process
HB 167:2006 Security risk management
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)
AS 1742.3-2009 Manual of uniform traffic control devices Traffic control for works on roads

€92.72
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.