AS/NZS ISO 9001:2000
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Quality management systems - Requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
15-12-2000
The A5 option is a special ruggedized edition of AS/NZS 9001:2000, printed on waterproof, washable stock, reduced in size to A5, and ring-bound. It is particularly intended for both internal and external auditors, or in any location where ordinary paper would be subject to damp, grease, oil or other soiling. Its smaller size and ring-binding make it especially suited for practical applications.
Specifies requirements for quality management systems. The requirements are generic, i.e. applicable to organizations regardless of size, type, industry, product or service. A quality management system that meets the requirements of AS/NZS ISO 9001 can be used for internal application by organizations, for certification and for contractural purposes. It focuses on the quality management system's effectiveness in meeting customer requirements, and may be used to demonstrate the ability to meet customer requirements, prevent nonconformity and address customer satisfaction and quality improvement. This Standard is identical with and has been reproduced from ISO 9001:2000. Those organizations which have used AS/NZS ISO 9002:1994 and AS/NZS ISO 9003:1994 in the past may use AS/NZS ISO 9001:2000 by excluding certain requirements, in accordance with Clause 1.2 of the Standard. To assist organizations currently using them to make the transition to AS/NZS ISO 9001:2000, the Joint Australian/New Zealand Standards AS/NZS ISO 9001:1994, AS/NZS ISO 9002:1994 and AS/NZS ISO 9003:1994 will remain available superseded standards until December 2003.
CommentClosesDate |
05-11-2001
|
Committee |
SM-001
|
DocumentType |
Standard
|
ISBN |
0 7337 3705 6
|
Pages |
23
|
PublisherName |
Standards Australia
|
Status |
AvailableSuperseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
Standards | Relationship |
ISO 9001:2000 | Identical |
First published in Australia as AS 3901-1987/ISO 9001:1990, AS 3902-1987/ISO 9002:1990 and AS 3903-1987/ISO 9003:1990.
First published in New Zealand as NZS 5601:1987, NZS 5602:1987 and NZS 5603:1987.
AS 3901-1987/ISO 9001:1990 and NZS 5601:1987 redesignated in 1990 as Joint Standard AS 3901-1987/NZS 9001:1990/ISO 9001:1987.
AS 3902-1987/ISO 9002:1990 and NZS 5602:1987 redesignated in 1990 as Joint Standard AS 3902-1987/NZS 9002:1990/ISO 9002:1987.
AS 3903-1987/ISO 9003:1990 and NZS 5603:1987 redesignated in 1990 as Joint Standard AS 3903-1987/NZS 9003:1990/ISO 9003:1987.
AS 3901-1987/NZS 9001:1990/ISO 9001:1987 jointly revised and redesignated as Joint Standard AS/NZS ISO 9001:1994.
AS 3902-1987/NZS 9002:1990/ISO 9002:1987 jointly revised and redesignated as Joint Standard AS/NZS ISO 9002:1994.
AS 3903-1987/NZS 9003:1990/ISO 9003:1987 jointly revised and redesignated as Joint Standard AS/NZS ISO 9003:1994.
AS/NZS ISO 9001:1994 jointly revised and designated AS/NZS ISO 9001(Int):2000.
AS/NZS ISO 9002:1994, AS/NZS ISO 9003:1994 and AS/NZS ISO 9001(Int):2000 jointly revised, amalgamated and redesignated as AS/NZS ISO 9001:2000.
AS/NZS ISO 9000:2000 | Quality management systems - Fundamentals and vocabulary |
ISO 9001:2000 | Quality management systems Requirements |
AS 3750.18-2002 | Paints for steel structures Moisture cure urethane (single-pack) systems |
AS 3806-2006 | Compliance programs |
MP 87.2:2007 | Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Recognized Service Facilities Program - Basic rules and procedures |
AS/NZS 4187:2003 | Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities |
AS 1442-2007 | Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017) |
AS 1599-2006 | Pressure-sensitive and water activated adhesive tape for packaging and office applications |
AS 1617.1-2003 | Refractory bricks and shapes Fireclay |
AS 2815.1-2008 | Training and certification of occupational divers Occupational SCUBA diver - Standard |
AS 3585-2008 | End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019) |
AS 3582.2-2001 | Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
AS/NZS 3584.1:2008 | Diesel engine systems for underground coal mines Fire protected - Heavy duty |
AS 4421-1996 | Guards and patrols |
AS 60076.1-2005 | Power transformers General (IEC 60076-1, Ed. 2.1 (2000) MOD) |
AS/NZS 2080:2006 | Safety glazing for land vehicles |
AS/NZS 3584.1:2005 | Diesel engine systems for underground coal mines Fire protected - Heavy duty |
AS 2832.5-2002 | Cathodic protection of metals - Steel in concrete structures |
AS 3892-2001 | Pressure equipment - Installation (Reconfirmed 2016) |
AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
AS 1085.10-2002 | Railway track material Rail anchors |
AS 1901-2004 | Electroplated coatings - Gold and gold alloys |
AS 2309-2008 | Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applications - Atmospheric |
AS 4123.5-2008 | Mobile waste containers Performance requirements and test methods |
AS/NZS 3509:2003 | LP Gas fuel vessels for automotive use |
AS ISO 10017-2006 | Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) |
AS 4049.4-2006 | Paints and related materials - Pavement marking materials High performance pavement marking systems |
AS 1085.13-2002 | Railway track material Spring fastening spikes for sleeper plates (Reconfirmed 2013) |
AS 1410-2003 | Sterilizers - Steam - Pre-vacuum |
AS 1406-2004 | Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017) |
AS 2423-2002 | Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021) |
AS 5039-2008 | Security screen doors and security window grilles |
AS 2214-2004 | Certification of welding supervisors - Structural steel welding |
AS 1085.20-2006 | Railway track material - Part 20: Welding of steel rail |
AS ISO 16104-2007 | Transport packaging for dangerous goods - Test methods |
AS 1085.18-2003 | Railway track material Screw spikes and threaded inserts |
AS 1447-2007 | Hot-rolled spring steels (Reconfirmed 2017) |
AS 4707-2006 | Chain of custody for certified wood and forest products |
AS 4672.1:2007 | Steel prestressing materials General requirements |
AS/NZS ISO 14344:2005 | Welding and allied processes - Flux and gas shielded electrical welding processes - Procurement guidelines for consumables |
AS 4256.1-2006 | Plastic roof and wall cladding materials General requirements (Reconfirmed 2018) |
AS/NZS 3582.3:2002 | Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
HB 139-2003 | Guidance on Integrating the Requirements of Quality, Environment, and Health and Safety Management System Standards |
AS 61850.4-2005 | Communication networks and systems in substations - System and project management |
AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
AS/NZS 1314:2003 | Prestressing anchorages (Reconfirmed 2016) |
HB 139-2003 | Guidance on Integrating the Requirements of Quality, Environment, and Health and Safety Management System Standards |
AS 1085.17-2003 | Railway Track Material Steel Sleepers (Reconfirmed 2013) |
AS 1928-2007 | Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003, MOD) |
AS 3776-2006 | Lifting components for Grade T chain slings |
AS 1228-2006 | Pressure equipment - Boilers |
AS 4706-2001 | Pressure gauges for regulators used with compressed gas cylinders (Reconfirmed 2016) |
AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
AS 3775.1-2004 | Chain slings - Grade T Product specification |
AS 1085.2-2002 | Railway track material Fishplates |
AS 1418.10(INT)-2004 | Cranes, hoists and winches Elevating work platforms |
AS 4506-2005 | Metal finishing - Thermoset powder coatings (Reconfirmed 2017) |
AS 1085.3-2002 | Railway track material Sleeper plates (Reconfirmed 2013) |
AS/NZS 3905.4:1995 | Quality system guidelines - Guide to quality system Standards AS/NZS ISO 9001:1994 and AS/NZS ISO 9002:1994 for the pressure equipment industry |
AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
AS 1472-2003 | Carbon steel spring wire for mechanical springs |
AS 3743-2003 | Potting mixes |
AS/NZS 4534:2006 | Zinc and zinc/aluminium-alloy coatings on steel wire (Reconfirmed 2017) |
AS/NZS 3800:2005 | Electrical equipment for explosive atmospheres - Repair and overhaul |
AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
AS 1085.14-2003 | Railway track material Prestressed concrete sleepers |
AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
AS/NZS 3584.2:2008 | Diesel engine systems for underground coal mines Explosion protected |
AS 3905.9-1996 | Quality system guidelines - Guide to AS/NZS ISO 9001:1994 for telecommunications call charging and call billing |
AS/NZS ISO/IEC 90003:2007 | Software engineering - Guidelines for the application of AS/NZS ISO 9001:2000 to computer software |
AS/NZS 4067:2004 | Firefighters' helmets |
AS 2030.2-1996 | The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene |
AS 1443-2004 | Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022) |
AS 1085.4-2002 | Railway track material Fishbolts and nuts (Reconfirmed 2013) |
AS 3906-2004 | Quality of service - Guide to customer expectations |
MP 87(Int):2001 | Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) - Basic rules and procedures |
AS 2353-1999 | Pedestrian push-button assemblies |
AS 1638-2008 | Motor vehicles - Light alloy road wheels |
AS 4256.2-2006 | Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets (Reconfirmed 2018) |
AS/NZS 4513:1995 | Medical electrical equipment - Fundamental aspects of safety standards (Reconfirmed 2022) |
AS 2266-2002 | Carbon steel spring wire for bedding and seating |
AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
AS 2089-2008 | Sheave blocks for lifting purposes (Reconfirmed 2019) |
AS/NZS 3905.7:1995 | Quality system guidelines - Guide to AS/NZS ISO 9001:1994 for the road freight transport industry |
AS 1856-2004 | Electroplated coatings - Silver |
AS 4256.4-2006 | Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards (Reconfirmed 2018) |
HB 407-2006 | Corporate governance for small business |
AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS 4397-2007 | Electroplated coatings of zinc on steel fasteners with imperial threads |
AS 1192-2004 | Electroplated coatings - Nickel and chromium (Reconfirmed 2017) |
AS 3873-2001 | Pressure equipment - Operation and maintenance |
AS 2374.1-1997 | Power transformers General |
AS/NZS 4801:2001 | Occupational health and safety management systems - Specification with guidance for use |
AS 1450-2007 | Steel tubes for mechanical purposes (Reconfirmed 2017) |
AS 2429-2004 | Electroplated coatings of rhodium for general engineering applications |
AS 8000-2003 | Corporate governance - Good governance principles |
AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
AS 4454-2003 | Composts, soil conditioners and mulches |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS/NZS 3947.5.3:2000 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Requirements for proximity devices with define behaviour under fault conditions |
AS 1085.7-2003 | Railway track material Spring washers |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
AS 4801-2000 | Occupational health and safety management systems - Specification with guidance for use |
MP 87:2004 | Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) - Basic rules and procedures |
AS 1085.19-2003 | Railway track material Resilient fastening assemblies (Reconfirmed 2013) |
AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
AS/NZS 1605.1:2006 | Methods for sampling and analysing timber preservatives and preservative-treated timber General requirements, sampling, and determination of sapwood and heartwood presence |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
MP 87.1:2008 | Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Product Certification Program - Basic rules and procedures |
AS ISO 20252-2007 | Market, opinion and social research - Vocabulary and service requirements (ISO 20252:2006, MOD) |
AS 4738.1-2007 | Metal castings Ferrous sand moulded |
AS 1324.1-2001 | Air filters for use in general ventilation and airconditioning Application, performance and construction |
AS 4750-2003 | Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017) |
AS 4738.1-2004 | Metal castings Ferrous sand moulded |
AS 1138-2008 | Thimbles for wire rope (Reconfirmed 2019) |
AS 2832.5-2008 | Cathodic protection of metals Steel in concrete structures |
AS 4398.2-2005 | Insulators - Ceramic or glass - Station post for indoor or outdoor use - Voltages greater than 1000 V a.c. Tests (IEC 60168, Ed. 4.2 (2001) MOD) |
AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
AS 1085.8-2002 | Railway track material Dogspikes |
AS 3771-1998 | Road lighting luminaires with integral control gear |
AS 4381-2002 | Single-use face masks for use in health care |
AS 61850.1-2005 | Communication networks and systems in substations - Introduction and overview |
AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
AS 4285-2007 | Skylights |
AS 4314-2005 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
AS 1085.12-2002 | Railway track material Insulated joint assemblies (Reconfirmed 2013) |
AS 4256.3-2006 | Plastic roof and wall cladding materials Glass fibre reinforced polyester (GRP) (Reconfirmed 2018) |
AS 4256.5-2006 | Plastic roof and wall cladding materials Polycarbonate (Reconfirmed 2018) |
AS 61850.2-2005 | Communication networks and systems in substations - Glossary |
HB 139-2003 | Guidance on Integrating the Requirements of Quality, Environment, and Health and Safety Management System Standards |
AS 2453-2004 | Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017) |
AS 2971-2002 | Serially produced pressure vessels |
AS/NZS 2144:2002 | Traffic signal lanterns |
AS 2971-2007 | Serially produced pressure vessels (Reconfirmed 2017) |
AS 3705-2003 | Geotextiles - Identification, marking, and general data |
AS 2741-2002 | Shackles (Reconfirmed 2014) |
AS 3850-2003 | Tilt-up concrete construction |
AS/NZS ISO 3834.1:2008 | Quality requirements for fusion welding of metallic materials Criteria for the selection of the appropriate level of quality requirements (Reconfirmed 2018) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.