API 500 : 2012
|
RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
ABMA 9 : 2015
|
LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
API 661 : 2015
|
PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
ISO 965-5:1998
|
ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
API 546 : 2008
|
BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
IEEE 841-2009
|
IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
ISO 10437:2003
|
Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
API 520-1 : 2014
|
SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
ISO 1940:1973
|
Balance quality of rotating rigid bodies |
ISO 1328-1:2013
|
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
AGMA ISO 1328 1 : B2014
|
CYLINDRICAL GEARS - ISO SYSTEM OF FLANK TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO FLANKS OF GEAR TEETH |
ISO 724:1993
|
ISO general-purpose metric screw threads — Basic dimensions |
API 614 : 2008
|
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
ASTM A 516/A516M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
ASTM A 350 : 2004
|
SPECIFICATION FOR FORGINGS, CARBON AND LOW ALLOY STEEL, REQUIRING NOTCH TOUGHNESS TESTING FOR PIPING COMPONENTS |
ISO 965-2:1998
|
ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
ISO 7-2:2000
|
Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size) |
ISO 10438-3:2007
|
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems |
ISO 281:2007
|
Rolling bearings Dynamic load ratings and rating life |
ISO 1217:2009
|
Displacement compressors Acceptance tests |
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
API 670 : 2014
|
MACHINERY PROTECTION SYSTEMS |
ASTM A 563 : 2015 : REDLINE
|
Standard Specification for Carbon and Alloy Steel Nuts |
ISO 8821:1989
|
Mechanical vibration Balancing Shaft and fitment key convention |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
ISO 965-4:1998
|
ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
ANSI S2.19 : 0
|
MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS OF RIGID ROTORS - PART 1: DETERMINATION OF PERMISSIBLE RESIDUAL UNBALANCE, INCLUDING MARINE APPLICATIONS |
ISO 13691:2001
|
Petroleum and natural gas industries — High-speed special-purpose gear units |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
API 526 : 2017
|
FLANGED STEEL PRESSURE-RELIEF VALVES |
API 612 : 2014
|
PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
ISO 10438-1:2007
|
Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
ISO 261:1998
|
ISO general purpose metric screw threads General plan |
ISO 10438-4:2007
|
Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems |
API STD 541 : 2014
|
FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
ISO 5753:1991
|
Rolling bearings — Radial internal clearance |
API 686 : 2009
|
RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN |
NFPA 30 : 2018
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ISO 13706:2011
|
Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
ISO 965-1:2013
|
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
ABMA 20 : 2011
|
RADIAL BEARINGS OF BALL, CYLINDRICAL ROLLER AND SPHERICAL ROLLER TYPES - METRIC DESIGN |
API 683 : 1993
|
QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
ISO 10441:2007
|
Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
AWS D1.1 : 2000
|
STRUCTURAL WELDING CODE - STEEL |
ISO 965-3:1998
|
ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
ISO 3448:1992
|
Industrial liquid lubricants — ISO viscosity classification |
API 520-2 : 2015
|
SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
ABMA 7 : 1995
|
SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN |
ISO 10438-2:2007
|
Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems |
ISO 945:1975
|
Cast iron — Designation of microstructure of graphite |