ISO 13707:2000
|
Petroleum and natural gas industries Reciprocating compressors |
ISO 9328-4:2011
|
Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties |
AGMA 2015-1 : A
|
ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
ISO 15649:2001
|
Petroleum and natural gas industries — Piping |
ISO 11972:2015
|
Corrosion-resistant cast steels for general applications |
AGMA 9002 : B
|
BORES AND KEYWAYS FOR FLEXIBLE COUPLINGS (INCH SERIES) |
ABMA 9 : 2015
|
LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
ISO 14120:2015
|
Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
API 546 : 2008
|
BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
IEEE 841-2009
|
IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
ISO 9725:2017
|
Nickel and nickel alloy forgings |
ISO 1083:2004
|
Spheroidal graphite cast irons - Classification |
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
ISO 1328-1:2013
|
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
ISO 724:1993
|
ISO general-purpose metric screw threads — Basic dimensions |
API 614 : 2008
|
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
EN 10213-2 : 1995
|
TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES |
ASME B16.11 : 2016
|
FORGED FITTINGS, SOCKET-WELDING AND THREADED |
ASTM A 516/A516M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
AGMA 6010 : F
|
STANDARD FOR SPUR, HELICAL, HERRINGBONE AND BEVEL ENCLOSED DRIVES |
ASME B16.42 : 2016
|
DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
ASME B31.3:2016
|
PROCESS PIPING |
ISO 1940-1:2003
|
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
ISO 4991:2015
|
Steel castings for pressure purposes |
ISO 6708:1995
|
Pipework components Definition and selection of DN (nominal size) |
EN 13835:2012
|
Founding - Austenitic cast irons |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
ISO 9329-4:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
ISO 281:2007
|
Rolling bearings Dynamic load ratings and rating life |
ISO 2892:2007
|
Austenitic cast irons Classification |
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 10095:1999
|
Heat resisting steels and nickel alloys |
NACE MR 01 75 : 2003
|
METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
EN 10283:2010
|
Corrosion resistant steel castings |
HI 6.6 : 2015
|
RECIPROCATING PUMP TESTS |
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
ASME B1.20.1 : 2013(R2018)
|
PIPE THREADS, GENERAL PURPOSE (INCH) |
EN 10272:2016
|
Stainless steel bars for pressure purposes |
ASTM A 563 : 2015 : REDLINE
|
Standard Specification for Carbon and Alloy Steel Nuts |
ISO 9329-2:1997
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
ISO 683-18:2014
|
Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
EN 10222-5:2017
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
EN 10250-4:1999
|
Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
EN 10213-3 : 1995
|
TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES |
EN 1563:2011
|
Founding - Spheroidal graphite cast irons |
API 526 : 2017
|
FLANGED STEEL PRESSURE-RELIEF VALVES |
ISO 286-2:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
EN 10083-1:2006
|
Steels for quenching and tempering - Part 1: General technical delivery conditions |
ASME PV CODE 5 : 2017
|
BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
EN 10083-2:2006
|
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
ISO 261:1998
|
ISO general purpose metric screw threads General plan |
API STD 541 : 2014
|
FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
ISO 5753:1991
|
Rolling bearings — Radial internal clearance |
ISO 9327-4:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof strength |
NFPA 30 : 2018
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ISO 185:2005
|
Grey cast irons Classification |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
API 675 : 2012
|
POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
AWS D1.1 : 2000
|
STRUCTURAL WELDING CODE - STEEL |
ASTM A 515/A515M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ISO 9327-5:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels |
ASME B16.47 : 2017
|
LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
EN 10213-4 : 1995
|
TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
ISO 9327-2:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties |
ISO 3448:1992
|
Industrial liquid lubricants — ISO viscosity classification |
ISO 16330:2003
|
Reciprocating positive displacement pumps and pump units Technical requirements |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 683-1:2016
|
Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
ABMA 7 : 1995
|
SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN |
EN 12451:2012
|
Copper and copper alloys - Seamless, round tubes for heat exchangers |
EN 1561:2011
|
Founding - Grey cast irons |
HI 8.1 - 8.5 : 2015
|
DIRECT-ACTING (STEAM) PUMPS - FOR NOMENCLATURE, DEFINITIONS, APPLICATION, AND OPERATION |