ASTM B 567 : 1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
31-12-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 02.05, 2017 Specifies the beta backscatter gages for the nondestructive measurement of metallic and nonmetallic coatings on both metallic and nonmetallic substrate materials.
| Committee |
B 08
|
| DevelopmentNote |
Supersedes EIA 364-48 (08/2006)
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method covers the nondestructive measurement of the mass per unit area of coating using beta backscatter gages. It also covers the measurement of the linear thickness if the coating density is known.
1.2 This test method applies to both metallic and nonmetallic coatings on both metallic and nonmetallic substrates.
1.3 This test method is applicable only if the atomic numbers or equivalent atomic numbers of the coating and the substrate differ by an appropriate amount (see 6.2).
1.4 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See specific hazard statements in Section 7.
| Standards | Relationship |
| SAE AMS2412K | Similar to |
| ASTM B 200 : 1985 : R2009 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| MIL H 38534 : B (1) | HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| ASTM B 679 : 1998 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| SAE AMS2514A | Anodic Coating on Aluminum Alloys Sulfuric Acid Process, Resin-Sealed |
| ASTM B 579 : 1973 : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM B 699 : 1986 : R2008 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 579 : 1973 : R2004 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM A 1074 : 2011 : R2015 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
| ASTM B 604 : 1991 : R2015 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM B 679 : 1998 : R2004 : EDT 1 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MIL-PRF-50884 Revision F:2014 | Printed Wiring Board, Flexible or Rigid-Flex, General Specification for |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| MIL-PRF-31032-2 Revision C:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE LAYER, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING |
| MIL-PRF-31032-1 Revision D:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT BLIND AND BURIED PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING |
| MIL-PRF-31032-4 Revision C:2017 | PRINTED WIRING BOARD, RIGID FLEX OR FLEXIBLE, MULTILAYER, WITH PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING |
| MIL-PRF-31032-6 Revision B:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE SIDED, THERMOPLASTIC RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| MIL-PRF-31032-3 Revision C:2017 | PRINTED WIRING BOARD, FLEXIBLE, SINGLE AND DOUBLE LAYER, WITH OR WITHOUT PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING |
| MIL-PRF-31032-5 Revision B:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| ASTM B 999 : 2015 | Standard Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate |
| ASTM B 605 : 1995 : REV A : R2004 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| MIL-M-38510 Revision J:1991 | MICROCIRCUITS, SPECIFICATION FOR |
| MIL-C-63186 Base Document:1982 | C RING, METAL M753 8 INCH PROJECTILE |
| SAE AMS2404J | Plating, Electroless Nickel |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| QQ-P-416 Revision F:1991 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| SAE AMS2401J | Plating, Cadmium Low Hydrogen Content Deposit |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| ASTM B 733 : 2015 : REDLINE | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| MIL-C-81562 Revision B:1983 | COATING, CADMIUM, TIN CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
| ASTM B 700 : 2008 : R2014 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| SAE AMS2460A | Plating, Chromium |
| ASTM B 984 : 2012 | Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use |
| ASTM B 696 : 2000 : R2015 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| SAE AMS 2422 : 2014 | PLATING, GOLD |
| ASTM B 699 : 1986 : R1998 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM F 1941/F1941M : 2016 : REDLINE | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| ASTM B 766 : 1986 : R1998 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 699 : 1986 : R2015 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| SAE AMS2530A | Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied |
| ASTM B 659 : 1990 : R2008 : EDT 1 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 904 : 2000 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| SAE AMS2411H | Plating, Silver for High Temperature Applications |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| SAE AMS 2439 : 2000 | SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, HARD DEPOSIT |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| SAE AMS2433C | Plating, Nickel-Thallium-Boron or Nickel-Boron Electroless Deposition |
| ASTM B 635 : 2000 : R2004 : EDT 1 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| SAE AMS 2454 : 2012 | PLATING, ELECTROLESS NICKEL, CODEPOSITED WITH POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| SAE AMSC8837A | Coating, Cadmium (Vacuum Deposited) |
| MIL-P-81728 Revision A:1973 | PLATING, TIN LEAD, (ELECTRODEPOSITED) |
| SAE AMS2418J | Plating, Copper |
| SAE AMS 2427 : 2012 | ALUMINUM COATING, ION VAPOR DEPOSITION |
| SAE AS7109/6B | Nadcap Requirements for Plating of Coated Parts |
| ASTM B 200 : 1985 : R2004 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| SAE AMS 2407 : 2012 | PLATING, CHROMIUM, POROUS |
| ASTM B 659 : 1990 : R2014 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 607 : 2015 : REDLINE | Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use |
| ASTM B 604 : 1991 : R2003 : EDT 1 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| SAE AMS2420E | Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process |
| ASTM B 766 : 1986 : R2003 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 604 : 1991 : R1997 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM B 699 : 1986 : R2003 | Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel |
| ASTM B 904 : 2000 : R2004 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| SAE AMSP81728B | Plating, Tin-Lead (Electrodeposited) |
| ASTM B 700 : 2008 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| MIL-PRF-38535 Revision K:2013 | Integrated Circuits (Microcircuits) Manufacturing, General Specification for |
| MIL-C-8837 Revision B:1983 | COATING, CADMIUM (VACUUM DEPOSITED) |
| MIL-T-10727 Revision C:1989 | TIN PLATING, ELECTRODEPOSITED OR HOT-DIPPED FOR FERROUS AND NONFERROUS METALS |
| ASTM B 766 : 1986 : R2015 | Standard Specification for Electrodeposited Coatings of Cadmium |
| SAE AMS2406N | Plating, Chromium Hard Deposit |
| MIL-DTL-5070 Revision F:2006 | ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL C 26074 : E | COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
| ASTM B 696 : 2000 : R2009 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| SAE AMSC26074D | Electroless Nickel Coatings |
| SAE AMSC81562A | Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) |
| SAE AMS2400X | Plating, Cadmium |
| SAE AMS 2409 : 2016 | PLATING, IMMERSION TIN FOR ALUMINUM ALLOYS |
| ASTM B 633 : 2019 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
| ASTM B 700 : 2020 | Standard Specification for Electrodeposited Coatings of Silver for Engineering Use |
| ASTM B 607 : 2015 | Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use |
| ASTM B 488 : 2018 | Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
| ASTM B 733 : 2015 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM F 1941/F1941M : 2016 | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| ASTM B 984 : 2012 : R2020 : EDT 1 | Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use |
| ASTM B 545 : 2013 | Standard Specification for Electrodeposited Coatings of Tin |
| ASTM B 604 : 1991 : R2019 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM B 634 : 2014 : REV A | Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use |
| ASTM A 1074 : 2011 : R2020 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
| ASTM B 696 : 2000 : R2004 : EDT 1 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| SAE AMS 2441 : 2000 | SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, LOW HARDNESS DEPOSIT |
| ASTM B 659 : 1990 : R1997 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 579 : 1973 : R1999 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM B 604 : 1991 : R2008 | Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics |
| ASTM B 200 : 1985 : R2015 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| ASTM B 604 : 1991 | SPECIFICATION FOR DECORATIVE ELECTROPLATED COATINGS OF COPPER PLUS NICKEL PLUS CHROMIUM ON PLASTICS |
| ASTM B 605 : 1995 : REV A : R1999 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 200 : 1985 : R1999 | Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys |
| SAE AMS2438E | Plating, Chromium Thin, Hard, Dense Deposit |
| MIL-L-13808 Revision B:1975 | LEAD PLATING (ELECTRODEPOSITED) |
| ASTM B 696 : 2000 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| MIL-DTL-24625 Revision A:2009 | ANODES, IMPRESSED CURRENT CATHODIC PROTECTION - PLATINIZED TYPE |
| SAE AMS 2434 : 2017 | PLATING, TIN-ZINC ALLOY |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| MIL-P-45209 Revision B:1981 | PALLADIUM PLATING, (ELECTRODEPOSITED) |
| SAE AMS2423E | Plating, Nickel Hard Deposit |
| SAE AMS2402K | Plating, Zinc |
| ASTM B 766 : 1986 : R2008 | Standard Specification for Electrodeposited Coatings of Cadmium |
| SAE AMS2419D | Plating, Cadmium-Titanium |
| ASTM B 635 : 2000 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM B 635 : 2000 : R2009 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| SAE AMS 2414 : 2016 | PLATING, LEAD |
| ASTM B 679 : 1998 : R2009 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM B 605 : 1995 : REV A : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 659 : 1990 : R2003 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 679 : 1998 : R2015 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM B 635 : 2000 : R2015 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM B 904 : 2000 : R2009 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM A 1074 : 2011 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
| ASTM B 904 : 2000 : R2014 | Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding |
| ASTM B 579 : 1973 : R2009 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM B 605 : 1995 : REV A : R2009 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.