ASTM D 3182 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
13-08-2021
English
01-01-2016
CONTAINED IN VOL. 09.01, 2016 Defines a listing of reference compounding materials required to prepare the rubber test compounds listed in succeeding methods and contains procedures for weighing.
Committee |
D 11
|
DevelopmentNote |
Supersedes ASTM D 15. (02/2002)
|
DocumentType |
Redline
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This practice provides a listing of reference compounding materials required to prepare the rubber test compounds listed in succeeding methods and contains procedures for weighing. It also specifies the mixing equipment, general mixing procedures, vulcanization equipment and procedures.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific warning statement, see 5.5.
ASTM D 3188 : 2006 | Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM D 3157 : 2005 | Standard Test Method for Rubber from Natural Sources—Color |
CSA C22.2 No. 179 : 2009 : INC : UPD 1 : 2015 : R201400 | AIRPORT SERIES LIGHTING CABLES |
ASTM D 4811/D4811M : 2016 : REDLINE | Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing |
MIL PRF 11891 : F | TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR - ELASTOMERIZED |
SAE J18_200204 | Sponge and Expanded Cellular Rubber Products1 |
ASTM F 2468 : 2005 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM D 5099 : 2008 : R2017 | Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
ASTM D 6284 : 2017 : REDLINE | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
ASTM D 2692/D2692M : 2015 : REDLINE | Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns |
SAE AMS3217A | Standard Elastomer Stocks Test Slabs |
MIL-DTL-85052 Revision B:2005 | CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR |
MIL-DTL-24709 Revision A:2018 | PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64 |
ASTM D 3903 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
ASTM D 3186 : 2007 : R2011 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 991 : 1989 : R2010 | Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D 6338 : 2017 : REDLINE | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
ASTM D 624 : 2000 : EDT 1 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
ASTM D 991 : 1989 : R2000 : EDT 1 | Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D 816 : 2006 | Standard Test Methods for Rubber Cements |
ASTM D 3157 : 2005 : R2015 | Standard Test Method for Rubber from Natural Sources—Color |
AASHTO M 261 : 1996 | SPECIFICATION FOR RIB-TREAD STANDARD TIRE FOR SPECIAL-PURPOSE PAVEMENT FRICTIONAL-PROPERTY TESTS |
ASTM D 1456 : 1986 : R2005 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
I.S. EN ISO 10414-2:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS |
SAE AMS7269B | RINGS, SEALING, SILICONE (PVMQ) RUBBER Low Outgassing, Space and Vacuum Service 45 - 55 |
IEEE DRAFT 1493 : D8 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
ASTM D 454 : 2004 : R2010 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
ASTM F 2493 : 2018 : REDLINE | Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire |
ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 3183 : 201 | PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS |
ASTM D 624 : 2000 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 3187 : 2006 : R2011 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D 750 : 2012 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM D 6147 : 1997 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression |
ASTM E 1136 : 2017 : REDLINE | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
ASTM D 3190 : 2006 : R2010 | Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR) |
ASTM D 413 : 1998 | Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate |
ASTM D 2228 : 2004 : R2009 | Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method |
ASTM D 3484 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D 3568 : 2003 : R2013 | Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 3189 : 2006 : R2011 | Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber) |
ASTM F 1909 : 1998 : R2004 | Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets |
ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
MIL-C-85449 Base Document:1981 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHION, GENERAL SPECIFICATION FOR |
SAE AMS3217/1B | Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75 |
ASTM D 6746 : 2015 : REDLINE | Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds |
ASTM D 3832 : 1979 : R2006 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM F 2870 : 2016 : REDLINE | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
MIL T 11891 : E | TRACK SHOE ASSEMBLY, TRACK SHOE SETS, TRACK SHOE PADS, & TRACK SHOE BUSHINGS, VEHICULAR, ELASTOMERIZED |
ASTM E 524 : 2008 | Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests |
ASTM C 1115 : 2017 : REDLINE | Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
ASTM D 5644 : 2001 : R2013 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM E 670 : 2009 | Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter |
BS AU 174-2:1985 | Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles Specification for non-petroleum base brake fluid |
ASTM C 864 : 2005 : R2011 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
ASTM D 6147 : 1997 : R2008 : EDT 1 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer<span class='unicode'>—</span>Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 624 : 2000 : R2007 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
SAE J1704_201607 | Motor Vehicle Brake Fluid Based Upon Glycols, Glycol Ethers and the Corresponding Borates |
ASTM D 1460 : 1986 : R2005 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
ASTM D 864 : 1952 : R1978 | Method of Test for Coefficient of Cubical Thermal Expansion of Plastics |
ASTM D 1917 : 2003 : R2012 | Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
ASTM D 991 : 1989 : R2005 | Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products |
CSA C22.2 No. 179 : 2009 | AIRPORT SERIES LIGHTING CABLES |
ASTM D 3183 : 2010 : R2015 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
CSA C22.2 No. 179 : 2 | AIRPORT SERIES LIGHTING CABLES |
ASTM D 573 : 2004 | Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM D 1456 : 1986 : R2014 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
ASTM D 3958 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber) |
ASTM D 3190 : 2006 | Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR) |
SAE AS85449A | Clamp Assembly, Saddle Type, Cushioned, General Specification For |
ASTM D 5669 : 1995 | Standard Test Method for Rubber-Evaluation of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Curemeter Testing (Withdrawn 2000) |
ASTM D 813 : 2007 : R2014 | Standard Test Method for Rubber Deterioration—Crack Growth |
ASTM D 3004 : 2008 | Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials |
ASTM D 3137 : 1981 : R1994 | Standard Test Method for Rubber Property—Hydrolytic Stability |
ASTM D 3848 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 3346 : 2017 : REDLINE | Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney) |
ASTM D 2287 : 2012 : REDLINE | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
ASTM D 1917 : 2003 : R2007 | Standard Test Methods for Rubber Property<span class='unicode'>—</span>Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
ASTM D 3958 : 2006 : R2011 | Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber) |
ASTM D 3568 : 2003 : R2009 | Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM C 1083 : 2006 : R2015 | Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
ASTM D 1485 : 2007 : R2015 | Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation |
ASTM D 5644 : 2001 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM C 864 : 2005 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
ASTM D 5963 : 2004 : R2010 : EDT 1 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
ASTM D 1460 : 1986 : R2001 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
ASTM D 623 : 2007 | Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
ASTM D 3137 : 1981 : R2007 | Standard Test Method for Rubber Property—Hydrolytic Stability |
ASTM D 925 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) |
ISO 4925:2005 | Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems |
ASTM D 2228 : 2004 : EDT 1 | Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method |
NACE TM 01 87 : 2011 | EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS |
SAE J2979_201205 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relaxation (CSR) Response |
ASTM D 816 : 2006 : R2011 | Standard Test Methods for Rubber Cements |
BS ISO 4925:2005 | Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems |
ASTM D 3187 : 2006 | Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D 1485 : 2007 : R2011 | Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation |
03/106442 DC : DRAFT APR 2003 | ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS |
ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 3771 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
UNI EN ISO 10414-2 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS |
ASTM D 3958 : 2006 | Standard Test Methods for Rubber-Evaluation of BIIR and CIIR (Halogenated Isobutene-Isoprene Rubber) |
NSF 61 : 2017 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
ASTM D 3190 : 2006 : R2016 | Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR) |
NACE TM 02 97 : 2017 | EFFECTS OF HIGH-TEMPERATURE, HIGH-PRESSURE CARBON DIOXIDE DECOMPRESSION ON ELASTOMERIC MATERIALS |
GOST R 52714:2018 | Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
ASTM D 3194 : 2017 : REDLINE | Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI) |
SAE J1703_201607 | Motor Vehicle Brake Fluid |
ASTM D 413 : 1998 : R2007 | Standard Test Methods for Rubber Property<span class='unicode'>—</span>Adhesion to Flexible Substrate |
ASTM D 1456 : 1986 : R2001 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
ASTM E 2203 : 2014 : R2018 | Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
ASTM D 3157 : 2005 : R2010 : EDT 1 | Standard Test Method for Rubber from Natural Sources—Color |
ASTM D 3191 : 2010 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)<span class='unicode'>—</span>Recipe and Evaluation Procedures |
ASTM D 1330 : 2004 : R2015 : EDT 1 | Standard Specification for Rubber Sheet Gaskets |
ASTM F 1909 : 1998 | Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets |
ASTM D 7121 : 2005 | Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum |
ASTM D 3137 : 1981 : R2001 | Standard Test Method for Rubber Property—Hydrolytic Stability |
ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 865 : 2011 | Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure) |
ASTM D 1917 : 2003 | Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
ASTM D 3568 : 2003 | Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 750 : 2012 : R2017 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM F 2872 : 2016 : REDLINE | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
ASTM D 572 : 2004 : R2015 | Standard Test Method for Rubber—Deterioration by Heat and Oxygen |
ASTM D 4482 : 2011 : R2017 | Standard Test Method for Rubber Property—Extension Cycling Fatigue |
ASTM D 3004 : 2008 : R2013 | Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials |
ASTM D 5963 : 2004 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 3185 : 2006 | Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM F 2871 : 2016 : REDLINE | Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
ASTM D 413 : 1998 : R2002 : EDT 1 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
ASTM E 670 : 2009 : R2015 | Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter |
ASTM D 3186 : 2007 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 572 : 2004 : R2010 | Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
API RP 13B-2 : 2014 | RECOMMENDED PRACTICE FOR FIELD TESTING OF OIL-BASED DRILLING FLUIDS |
ASTM D 572 : 2004 : R2009 | Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
ASTM D 3484 : 2006 : R2010 | Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
MIL-PRF-82791 Base Document:1990 | Rubber, Silicone, TRV |
ASTM D 1330 : 2004 | Standard Specification for Rubber Sheet Gaskets |
CSA C22.2 No. 179 : 2009 : R2014 | AIRPORT SERIES LIGHTING CABLES |
ASTM D 573 : 2004 : R2015 | Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM F 2468 : 2005 : R2011 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM D 5099 : 2008 | Standard Test Methods for Rubber<span class='unicode'>—</span>Measurement of Processing Properties Using Capillary Rheometry |
ASTM E 1844 : 2008 | Standard Specification for A Size 10 <span class='unicode'>×</span> 4<span class='unicode'>–</span>5 Smooth-Tread Friction Test Tire |
SAE AMS3345F | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer |
ASTM D 1056 : 2014 : REDLINE | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
ASTM D 3832 : 1979 : R2011 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
MIL H 26521 : J | HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS |
ASTM D 3832 : 1979 : R2001 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
BS EN ISO 10414-2:2011 | Petroleum and natural gas industries. Field testing of drilling fluids Oil-based fluids |
ASTM D 3832 : 1979 : R1997 : EDT 1 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM E 501 : 2008 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
ASTM D 2934 : 1989 | Method of Testing for Compatibility of Vulcanized Rubber Seals--Compatibility with Service Fluids (Withdrawn 1993) |
ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
ASTM D 1871 : 2004 : R2010 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
MIL C 85052 : A | CLAMP LOOP, CUSHION, GENERAL SPECIFICATION FOR |
SAE AMS3347C | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 – 55 |
ASTM D 573 : 2004 : R2010 | Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM D 5099 : 2008 : R2013 | Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
ASTM E 501 : 2008 : R2015 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
ASTM D 3189 : 2006 | Standard Test Methods for Rubber-Evaluation of Solution BR (Polybutadiene Rubber) |
MIL PRF 3100 : F | WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES |
ASTM D 3848 : 2003 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM F 1909 : 1998 : R2012 | Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets |
SAE AS85052A | Clamp Assembly, Loop Type, Cushioned, General Specification For |
SAE AMS3346G | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer |
ASTM D 3186 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 454 : 2004 : R2015 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
ASTM D 7121 : 2005 : R2012 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 5963 : 2004 : R2015 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 816 : 2006 : R2016 | Standard Test Methods for Rubber Cements |
ASTM D 3568 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 2228 : 2004 | Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method |
ASTM D 3188 : 2006 : R2010 | Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM D 3185 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM D 1460 : 1986 : R2014 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
ASTM D 624 : 2000 : R2012 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 3491 : 1992 | Standard Test Methods for Vulcanizable Rubber Tank and Pipe Lining (Withdrawn 1996) |
ASTM F 2466 : 2010-07 | PRACTICE FOR DETERMINING SILICONE VOLATILES IN SILICONE RUBBER FOR TRANSPORTATION APPLICATIONS |
ASTM D 3187 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D 3185 : 2006 : R2010 | Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM D 623 : 2007 : R2014 | Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
ASTM D 413 : 1998 : R2017 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
ASTM D 1917 : 2003 : R2017 | Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
GOST 849:2018 | Primary nickel. SpecificationsE |
ISO 10414-2:2011 | Petroleum and natural gas industries Field testing of drilling fluids Part 2: Oil-based fluids |
EN ISO 10414-2:2011 | Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011) |
MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
ASTM D 3189 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber) |
ASTM D 3848 : 2003 : R2009 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 3188 : 2006 : R2017 | Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM C 1083 : 2006 : R2011 | Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
ASTM D 1417 : 2016 : REDLINE | Standard Test Methods for Rubber Latices—Synthetic |
ASTM D 3192 : 2009 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 1460 : 1986 : R1997 : EDT 1 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
ASTM C 1083:2006 | Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
ASTM D 3183 : 2010 | Standard Practice for Rubber<span class='unicode'>—</span>Preparation of Pieces for Test Purposes from Products |
ASTM D 4482 : 2011 | Test Method for Rubber Property<char: emdash>Extension Cycling Fatigue |
MIL R 82791 : 0 | RUBBER, SILICONE, RTV |
ASTM D 1330 : 2004 : R2010 | Standard Specification for Rubber Sheet Gaskets |
NACE TM 02 96 : 2014 | EVALUATING ELASTOMERIC MATERIALS IN SOUR LIQUID ENVIRONMENTS |
ASTM E 1551 : 2016 : REDLINE | Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire |
SAE MA2150 | Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric |
ASTM D 3484 : 2006 | Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D 3403 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 572 : 2004 | Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
MIL-DTL-26521 Revision L:2014 | Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
ASTM D 1871 : 2004 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
ASTM D 5668 : 2009 | Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter |
ASTM D 3403 : 2007 : R2011 | Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
SAE MA2151 | Clamp Assemblies, Saddle or Omega Style, Two Point Mount, Multiple Shapes, Metric |
ASTM D 1460 : 1986 : R2010 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
ASTM D 3137 : 1981 : R2013 | Standard Test Method for Rubber Property—Hydrolytic Stability |
ASTM D 3137 : 1981 : R2018 | Standard Test Method for Rubber Property—Hydrolytic Stability |
C22.2 NO. 96.2-18 | Flexible power cables for wind turbine applications rated up to 35 kV |
ASTM D 5963 : 2004 : R2010 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 813 : 2007 | Standard Test Method for Rubber Deterioration-Crack Growth |
SAE J2643_201312 | Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized Rubbers |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
IEEE 1493 : 2006 | EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES |
ASTM D 413 : 1998 : R2013 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
CSA C22.2 No. 96.1 : 2016 | MINE POWER FEEDER CABLES |
SAE AMS7268C | Rings, Sealing, Silicone Rubber Low Compression Set, Non-Oil Resistant 65 - 75 |
ASTM D 3403 : 2007 | Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
ASTM D 6147 : 1997 : R2014 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 3192 : 2009 : R2014 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 2230 : 2017 : REDLINE | Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds |
ASTM D 5644 : 2001 : R2008 : EDT 1 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM F 640 : 2012 : REDLINE | Standard Test Methods for Determining Radiopacity for Medical Use |
ASTM E 524 : 2008 : R2015 | Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests |
ASTM D 6147 : 1997 : R2002 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 1456 : 1986 : R2010 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
ASTM E 1844 : 2008 : R2015 | Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire |
ASTM D 2228 : 2004 : R2015 | Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method |
ASTM D 1485 : 2007 | Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation |
ASTM D 3667 : 2016 : REDLINE | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
ASTM D 454 : 2004 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
ASTM D 3848 : 2003 : R2013 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 5668 : 2009 : R2014 | Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter |
ASTM D 5644 : 2001 : R2008 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM D 3191 : 2010 : R2014 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
ASTM D 6147 : 1997 : R2008 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer<span class='unicode'>—</span>Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 1456 : 1986 : R1996 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
ASTM D 991 : 1989 : R2014 | Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM C 864 : 2005 : R2015 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
ASTM D 2501 : 2014-07 | TEST METHOD FOR CALCULATION OF VISCOSITY-GRAVITY CONSTANT (VGC) OF PETROLEUM OILS |
ASTM D 2084 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER |
ASTM D 5289 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.