• Shopping Cart
    There are no items in your cart

ASTM D 7292 : 2018

Current

Current

The latest, up-to-date edition.

Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-08-2018

€56.53
Excluding VAT

This specification covers requirements and methods of test for the material, dimensions, and workmanship of extruded, compression molded, and injection molded parts manufactured from PAI.

Committee
D 20
DocumentType
Standard
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers requirements and methods of test for the material, dimensions, and workmanship of extruded, compression molded, and injection molded parts manufactured from PAI.

1.2The properties included in this specification are those required for the compositions covered. Requirements necessary to identify particular characteristics important to specialized applications are described by the classification system given in Section 5.

1.3This specification allows for the use of recycled materials provided that specification requirements based upon this specification are met.

1.4The values stated in English units are to be regarded as standard in all property and dimensional tables. For reference purposes, SI units and conversion factors are also included.

1.5The following precautionary caveat pertains only to the test method portion Section 12, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Note 1:There is no known ISO equivalent to this standard.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 256 : 2010 : R2018 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D 1708 : 1996 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D 883 : 2023 Standard Terminology Relating to Plastics
ASTM D 1708 : 2006 : REV A Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D 3418 : 2012 : EDT 1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2013 Standard Classification System for Specifying Plastic Materials
ASTM D 883 : 2024 : REV A Standard Terminology Relating to Plastics
ASTM D 3418 : 1982 : R1988 : EDT 1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
ASTM D 3892 : 2015 : R2020 Standard Practice for Packaging/Packing of Plastics
ASTM D 3418 : 1999 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM D 4000 : 2003 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 3418 : 2021 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2000 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 883 : 2024 Standard Terminology Relating to Plastics
ASTM D 4000 : 2012 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2009 Standard Classification System for Specifying Plastic Materials
ASTM D 3892 : 1993 : R2003 Standard Practice for Packaging/Packing of Plastics
ASTM D 256 : 2023 : EDT 1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D 3892 : 2015 Standard Practice for Packaging/Packing of Plastics
ASTM D 1708 : 2002 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D 4000 : 2011 Standard Classification System for Specifying Plastic Materials
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 1708 : 2006 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM D 7209 : 2006 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015)
ASTM D 3892 : 1993 : R1998 Standard Practice for Packaging/Packing of Plastics
ASTM D 5204 : 2011 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 4000 : 2004 : EDT 1 Standard Classification System for Specifying Plastic Materials
ASTM D 3418 : 2012 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2023 Standard Classification System for Specifying Plastic Materials
ASTM D 3418 : 2003 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 5204 : 2003 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 3418 : 2015 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2009 : REV B Standard Classification System for Specifying Plastic Materials
ASTM D 5204 : 2017 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 4000 : 2000 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2010 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 256 : 2023 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D 4000 : 2007 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2009 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2001 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2008 Standard Classification System for Specifying Plastic Materials
ASTM D 5204 : 2001 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
ASTM D 618 : 2013 Standard Practice for Conditioning Plastics for Testing
ASTM D 5204 : 2022 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 3418 : 2008 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2001 : REV A : EDT 1 Standard Classification System for Specifying Plastic Materials
ASTM D 5204 : 2013 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 1708 : 2013 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D 4000 : 2004 Standard Classification System for Specifying Plastic Materials
ASTM D 1708 : 2010 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D 5204 : 2019 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 3892 : 1993 : R2009 Standard Practice for Packaging/Packing of Plastics
ASTM D 1708 : 2002 : REV A Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D 4000 : 2010 Standard Classification System for Specifying Plastic Materials
ASTM D 5204 : 2006 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 1708 : 2018 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D 4000 : 2003 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2020 Standard Classification System for Specifying Plastic Materials
ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing
ASTM D 5204 : 1999 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 638 : 2022 Standard Test Method for Tensile Properties of Plastics

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.