Skip to content
Please enter a keyword to search

  • ASTM D 7549 : 2021

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

    Available format(s):  Hardcopy, PDF

    Superseded date:  14-07-2023

    Language(s):  English

    Published date:  07-04-2021

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1The test method covers a heavy-duty engine test procedure under high output conditions to evaluate engine oil performance with regard to piston deposit formation, piston ring sticking and oil consumption control in a combustion environment designed to minimize exhaust emissions. This test method is commonly referred to as the Caterpillar C13 Heavy-Duty Engine Oil Test.3

    1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.2.1Exceptions—Where there are no SI equivalent such as screw threads, National Pipe Treads (NPT), and tubing sizes.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Annex A1 for general safety precautions.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Test Method
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 4485 : 2020 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 8047 : 2023 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
    ASTM D 4485 : 2022 : EDT 1 Standard Specification for Performance of Active API Service Category Engine Oils

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 5967 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
    ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM D 4175 : 2020 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 5967 : 2021 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
    ASTM D 613 : 2018 : REV A Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 86 : 2023 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 664 : 2017 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 975 : 2022 Standard Specification for Diesel Fuel
    ASTM D 86 : 2020 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 482 : 2013 Standard Test Method for Ash from Petroleum Products
    ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 6078 : 2004 : R2016 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) (Withdrawn 2021)
    ASTM D 613 : 2023 Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 86 : 2018 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 4175 : 2022 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 235 : 2022 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
    ASTM D 445 : 2021 : EDT 2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 975 : 2021 Standard Specification for Diesel Fuel
    ASTM D 93 : 2019 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    ASTM E 178 : 2016 : REV A Standard Practice for Dealing With Outlying Observations
    ASTM D 445 : 2017 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4175 : 2020 : REV B : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 86 : 2019 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 2709 : 2016 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 4175 : 2022 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 976 : 2021 Standard Test Method for Calculated Cetane Index of Distillate Fuels
    ASTM D 613 : 2018 : REV A : EDT 1 Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 86 : 2012 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
    ASTM D 975 : 2020 : REV C Standard Specification for Diesel Fuel
    ASTM E 178 : 2021 Standard Practice for Dealing With Outlying Observations
    ASTM D 4175 : 2022 : REV A : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 976 : 2021 : EDT 1 Standard Test Method for Calculated Cetane Index of Distillate Fuels
    ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 86 : 2016 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 97 : 2017 : REV B Standard Test Method for Pour Point of Petroleum Products
    ASTM D 6987/D6987M : 2013 : REV A Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)
    ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 445 : 2019 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 235 : 2002 : R2012 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021)
    ASTM D 2709 : 2022 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    ASTM D 4175 : 2022 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 130 : 2018 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
    ASTM D 975 : 2022 : REV A Standard Specification for Diesel Fuel
    ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2622 : 2021 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 97 : 2017 : REV B : R2022 Standard Test Method for Pour Point of Petroleum Products
    ASTM D 664 : 2011 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 86 : 2020 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 5186 : 2022 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
    ASTM D 976 : 2006 : R2016 Standard Test Method for Calculated Cetane Index of Distillate Fuels
    ASTM D 524 : 2015 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
    ASTM D 4052 : 2022 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    ASTM D 445 : 2018 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 86 : 2015 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 86 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 1319 : 2019 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 5186 : 2020 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography
    ASTM D 130 : 2012 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
    ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 93 : 2018 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective