ASTM D 907 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Terminology of Adhesives
Available format(s)
PDF
Superseded date
13-10-2015
Language(s)
English
Published date
13-10-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.06, 2015 Defines a compilation of definitions used in the science and technology of the adhesives industry.
| Committee |
D 14
|
| DocumentType |
Redline
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
1.1This terminology standard is a compilation of definitions used in the science and technology of the adhesives industry. Terms that are generally understood or adequately defined in other readily available sources are not included.
1.2Any changes in this standard since 1988 are documented as follows:
1.2.1Appendix X1 gives a history of revisions made since 1988. Table X1.1 lists the terms that are affected as: (1) Terms Added, (2) Terms Revised, and (3) Terms Deleted.
1.2.1.1In Table X1.1, the year of publication in Volume 15.06 is shown in parentheses following the term.
1.2.2In the text of the standard, the year of publication is shown following each definition. Also, the following codes are included after the year of publication to describe the type change that was made: (A) Addition, (R) Revision, or (E) Edited.
1.2.3Deletions are shown in Appendix X1, suitably footnoted. The deleted terms do not appear in the text of the standard.
1.2.4Any special circumstances not covered by 1.2.2 and 1.2.3 are documented in Table X1.1, suitably footnoted.
| ASTM D 1184 : 1998 : R2004 | Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
| ASTM D 1828 : 2001 : R2007 | Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
| ASTM F 826 : 1994 : R2010 | Standard Specification for Tops, Furniture, Marine, Steel |
| ASTM D 5040 : 1990 : R2016 | Standard Test Methods for Ash Content of Adhesives |
| ASTM D 4680 : 1998 : R2004 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 1583 : 2001 : R2008 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM D 1828 : 2001 | Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
| ASTM D 3434 : 2000 : R2006 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 5215 : 1993 : R2012 | Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
| ASTM F 2255 : 2005 : R2015 | Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading |
| ASTM D 2308 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2834 : 1995 | Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes |
| ASTM D 3632 : 1998 : R2019 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
| ASTM D 2295 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 4649 : 2003 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM D 1582 : 1998 : R2017 | Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 5041 : 1998 : R2004 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
| ASTM D 1579 : 2001 : R2013 | Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 7998 : 2015 | Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading |
| ASTM D 5572 : 1995 : R1999 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM D 1144 : 1999 : R2016 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 1579 : 2001 : R2018 | Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 2294 : 1996 : R2016 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 2339 : 1998 : R2011 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 1879 : 2006 : R2014 | Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation |
| ASTM D 3658 : 2001 : R2016 | Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
| ASTM D 4300 : 2001 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM D 897 : 2008 : R2016 | Standard Test Method for Tensile Properties of Adhesive Bonds |
| ASTM D 3069 : 1994 : R1999 : EDT 1 | Standard Test Method for Delivery Rate of Aerosol Products |
| ASTM D 4800 : 1994 : R2011 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 1828 : 2001 : EDT 1 | Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
| ASTM D 2293 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2095 : 1996 : R2008 | Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
| ASTM D 905 : 2008 : R2013 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
| ASTM D 1488 : 2000 : R2018 | Standard Test Method for Amylaceous Matter in Adhesives |
| ASTM D 2303 : 1997 : R2004 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 1084 : 2016 : REDLINE | Standard Test Methods for Viscosity of Adhesives |
| ASTM D 1338 : 1999 : R2011 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM D 1781 : 1998 : R2004 | Standard Test Method for Climbing Drum Peel for Adhesives |
| ASTM D 3023 : 1998 : R2011 | Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents |
| ASTM D 6463 : 1999 | Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
| ASTM D 6412/D6412M : 1999 : R2012 | Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials |
| ASTM D 2557 : 1998 | Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F) |
| ASTM D 2318 : 1998 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3535 : 2007 : REV A | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
| ASTM D 4027 : 1998 : R2019 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 2300 : 2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3163 : 2001 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 6412/D6412M:1999 | Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials |
| ASTM D 5751 : 1999 : R2005 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| CSA O112.9 : 2010 : R2014 | EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE) |
| ASTM D 5267 : 1997 | Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
| ASTM D 2339 : 1998 : R2017 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 3535 : 2007 | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
| CSA O112.9 : 2010(R2019) | EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE) |
| ASTM D 5648 : 2001 : R2008 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 5267 : 1997 : R2005 | Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
| ASTM D 2295 : 1996 : R2016 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 4499 : 2007 | Standard Test Method for Heat Stability of Hot-Melt Adhesives |
| ASTM D 2919 : 2001 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 1779 : 1998 : R2017 | Standard Specification for Adhesive for Acoustical Materials |
| ASTM D 3933 : 1998 | Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
| ASTM D 3658 : 2001 : R2008 | Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
| ASTM F 824 : 1993 : R1999 | Standard Specification for Tables, Mess, Marine, Steel |
| AASHTO MP 22 : 2013 : R2015 | SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES |
| ASTM D 9 : 2012 : REDLINE | Standard Terminology Relating to Wood and Wood-Based Products |
| ASTM D 5824 : 1998 : R2017 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 6005 : 2003 | Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
| ASTM D 1144 : 1999 : R2005 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 3930 : 20081 | Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
| ASTM D 5267 : 1997 : R2017 | Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
| ASTM D 4501 : 2001 | Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
| ASTM D 1489 : 2009 | Standard Test Method for Nonvolatile Content of Aqueous Adhesives |
| ASTM D 4499 : 2007 : R2015 | Standard Test Method for Heat Stability of Hot-Melt Adhesives (Withdrawn 2021) |
| ASTM D 1582 : 1998 : R2004 | Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 899 : 2000 | Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
| ASTM D 1490 : 2001 : R2013 | Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
| ASTM D 6465 : 1999 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 2557 : 1998 : R2004 | Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F) |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 905 : 2008 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
| ASTM D 6004 : 2004 : R2011 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives (Withdrawn 2020) |
| ASTM D 2919 : 2001 : R2007 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 3807 : 1998 : R2004 | Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
| ASTM D 5656 : 2010 : R2017 | Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
| ASTM D 2651 : 2001 : R2008 | Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
| ASTM D 2557 : 1998 : R2017 | Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F) |
| ASTM D 3933 : 1998 : R2010 | Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
| ASTM D 3434 : 2000 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 6005 : 2003 : R2017 | Standard Test Method for Determining Slump Resistance of Carpet Adhesives (Withdrawn 2017) |
| ASTM D 2835 : 1989 : R2007 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM F 825 : 1993 : R2004 | Standard Specification for Drawers, Furniture, Marine, Steel |
| ASTM D 3164M : 2003 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Withdrawn 2012) |
| ASTM D 4896 : 2001 : R2008 : EDT 1 | Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
| ASTM D 4688 : 1999 : R2005 | Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
| ASTM D 1579 : 2001 | Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 3310 : 2000 : R2006 | Standard Test Method for Determining Corrosivity of Adhesive Materials |
| ASTM D 6464 : 2003 : REV A : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 4300 : 2001 : R2008 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM D 2339 : 1998 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 3632 : 1998 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 1579 : 2001 : R2008 | Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 903 : 1998 : R2017 | Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D 2918 : 1999 | Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
| ASTM D 4783 : 2001 : EDT 1 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 1583 : 2001 : R2013 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM F 2458 : 2005 : R2015 | Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
| ASTM D 4783 : 2001 : R2008 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 899 : 2000 : R2007 | Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
| ASTM D 1151 : 2000 : R2013 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 3166 :1999 | Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
| ASTM D 3434 : 2000 : R2013 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM F 823 : 1993 : R1999 | Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
| ASTM D 3434 : 2000 : R2018 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D 6411/D6411M : 1999 : R2005 | Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 2293 : 1996 | Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) |
| ASTM D 5824 : 1998 : R2003 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 5215 : 1993 : R1999 | Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
| ASTM D 1995 : 1992 : R1998 : EDT 1 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 2294 : 1996 : R2002 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 4783 : 2001 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 1780 : 2005 | Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
| ASTM D 3808 : 2001 | Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
| ASTM D 6465 : 1999 : R2005 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 1779 : 1998 | Standard Specification for Adhesive for Acoustical Materials |
| ASTM D 5041 : 1998 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
| ASTM D 1490 : 2001 | Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
| ASTM D 3163 : 2001 : R2008 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 4426:2001 | Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
| ASTM D 5113 : 1997 : R2016 | Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
| ASTM D 4688 : 1999 : R2013 | Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
| ASTM D 896 : 2004 | Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
| ASTM D 1304 : 1999 | Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
| ASTM D 4338:1997 | Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
| ASTM D 5572 : 1995 : R2005 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 4783 : 2001 : R2013 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 6195 : 2003 : EDT 1 | Standard Test Methods for Loop Tack |
| ASTM D 2293 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 7532 : 2009 : R2016 | Standard Practice for Determination of Re-tack Ability of Carpet Adhesives |
| ASTM D 6464 : 2003 : REV A | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 4689 : 2012-10 | SPECIFICATION FOR ADHESIVE, CASEIN-TYPE |
| ASTM D 1184 : 1998 : R2012 | Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
| ASTM D 3528 : 1996 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 3433 : 1999 : R2005 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
| ASTM D 2843 : 1999 | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
| ASTM D 4502 : 1992 : R1998 : EDT 1 | Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
| ASTM D 1151 : 2000 : R2006 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 3164 : 2003 : R2017 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 1304 : 1999 : R2005 | Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
| ASTM D 905 : 2008 : EDT 1 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
| ASTM D 1875 : 2003 : R2018 | Standard Test Method for Density of Adhesives in Fluid Form |
| ASTM F 2256 : 2005 | Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
| ASTM D 1876 : 2008 : R2015 : EDT 1 | Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
| ASTM D 3932 : 1980 | Practice for Control of the Application of Structural Fasteners When Attached by Hot Melt Adhesive (Withdrawn 1991) |
| ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| ASTM D 1338 : 1999 : R2016 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM D 3632 : 1998 : R2004 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 5657 : 2007 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM D 2318 : 1998 : R2003 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3929 : 2003 | Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method |
| ASTM D 2293 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 906 : 1998 | Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
| ASTM D 6411/D6411M:1999 | Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 3110 : 1995 | Specification for Adhesives Used in Laminate Joints for Nonstructural Glued Lumber Products (Withdrawn 1996) |
| ASTM D 2878 : 2010 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| ASTM D 1183 : 2003 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D 2295 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 950 : 2003 | Standard Test Method for Impact Strength of Adhesive Bonds |
| ASTM D 2293 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2303 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 6325 : 1998 | Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 4562 : 2001 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 4562 : 2001 : R2007 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 4426 : 2001 : R2006 | Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
| ASTM F 2258 : 2005 : R2015 | Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| ASTM D 2296 : 2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 4649 : 2003 : R2016 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM F 822 : 1993 : R2017 | Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
| ASTM D 1583 : 2001 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM F 825 : 1993 : R2010 | Standard Specification for Drawers, Furniture, Marine, Steel |
| ASTM D 2293 : 1996 : R2016 | Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) |
| ASTM D 5267 : 1997 : R2012 | Standard Test Method for Determination of Extrudability of Cartridge Adhesives |
| ASTM D 1994 : 2007 : R2015 | Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021) |
| ASTM D 4502 : 1992 : R2004 | Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
| ASTM D 3658 : 2001 | Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints |
| ASTM F 2392 : 2004 : R2010 | Standard Test Method for Burst Strength of Surgical Sealants |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 2339 : 1998 : R2004 | Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading |
| ASTM D 903 : 1998 : R2004 | Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D 3482 : 2007 : REV A | Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
| ASTM D 6383/D6383M : 1999 : R2011 : EDT 1 | Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 5649 : 2015 : REDLINE | Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM D 6862 : 2011 : R2016 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM D 2294 : 1996 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 4680 : 1998 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 1875 : 2003 | Standard Test Method for Density of Adhesives in Fluid Form |
| ASTM D 5574 : 1994 : R1999 : EDT 1 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 3983 : 1998 : R2004 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 3983 : 1998 : R2019 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 2093 : 2003 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
| ASTM D 6464 : 2003 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 5868 : 2001 : R2014 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 3167 : 2010 | Standard Test Method for Floating Roller Peel Resistance of Adhesives |
| ASTM D 3929 : 2003 : R2015 | Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method |
| ASTM F 822 : 1993 : R2004 | Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
| ASTM D 3165 : 2007 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
| ASTM D 1779 : 1998 : R2004 | Standard Specification for Adhesive for Acoustical Materials |
| ASTM D 5648 : 2001 : R2014 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 1995 : 1992 : R2004 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 6383 : 1999 : R2005 | Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 3808 : 2001 : R2013 | Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
| ASTM D 3163 : 2001 : R2014 | Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading |
| ASTM D 3762 : 2003 | Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM D 2845 : 2000 : R2004 : EDT 1 | Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock |
| ASTM D 2307 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3983 : 1998 : R2011 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 5751 : 1999 : R2012 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 4896 : 2001 : R2016 | Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
| ASTM D 6383/D6383M : 1999 : R2015 | Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 898 : 2005 | Standard Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids (Withdrawn 2006) |
| ASTM F 2392 : 2004 | Standard Test Method for Burst Strength of Surgical Sealants |
| ASTM D 3070 : 2000 : R2005 | Standard Test Method of Rapid Pressure Determination of Pressurized Products |
| ASTM D 3070 : 2000 : R2010 | Standard Test Method of Rapid Pressure Determination of Pressurized Products |
| ASTM D 2919 : 2001 : R2014 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 3807 : 1998 | Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
| ASTM D 5868 : 2001 : R2008 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM F 782 : 2001 : R2012 | Standard Specification for Doors, Furniture, Marine |
| ASTM D 2843 : 1999 : R2004 | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
| ASTM D 904 : 1999 : R2013 | Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
| ASTM D 2288 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 1994 : 2007 | Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives |
| ASTM D 1304 : 1999 : R2012 | Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
| ASTM D 2919 : 2001 : EDT 1 | Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading |
| ASTM D 1781 : 1998 : R2012 | Standard Test Method for Climbing Drum Peel for Adhesives |
| ASTM D 2300 : 2008 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3165 : 2007 : R2014 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
| ASTM D 1151 : 2000 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D 2319/D2319M : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 5824 : 1998 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 4426 : 2001 : R2013 | Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
| ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
| ASTM D 6195 : 2003 : R2011 | Standard Test Methods for Loop Tack |
| ASTM D 3535 : 2007 : REV A : R2013 | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
| ASTM D 2295 : 1996 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 2295 : 1996 : R2008 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 4800 : 1994 : R2015 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 2093 : 2003 : R2011 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
| ASTM D 1337 : 2010 : R2016 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM D 3167 : 2010 : R2017 | Standard Test Method for Floating Roller Peel Resistance of Adhesives |
| ASTM D 2878 : 1995 : R2000 : EDT 1 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| ASTM D 2095 : 1996 : R2015 | Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
| ASTM D 906 : 1998 : R2011 | Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
| GOST R 52714:2018 | Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 2318 : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3076 : 2000 : R2010 | Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers |
| ASTM D 5405/D5405M : 1998 : R2011 : EDT 1 | Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
| ASTM D 1780 : 2005 : R2012 | Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives |
| ASTM D 1146 : 2000 : R2007 | Standard Test Method for Blocking Point of Potentially Adhesive Layers |
| ASTM D 5751 : 1999 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM D 2835 : 1989 : R2003 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 3164 : 2003 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 2094 : 2000 | Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
| ASTM D 4300 : 2001 : R2013 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM F 823 : 1993 : R2010 | Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
| ASTM F 823 : 1993 : R2017 | Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
| ASTM D 1144 : 1999 : R2011 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| ASTM D 5040 : 1990 : R2005 | Standard Test Methods for Ash Content of Adhesives |
| ASTM D 904 : 1999 : R2005 | Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
| ASTM D 1337:2010 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM D 7446 : 2009 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
| ASTM F 2255 : 2005 | Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading |
| ASTM D 6004 : 2004 | Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives |
| ASTM F 824 : 1993 : R2010 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM D 3482 : 2007 : REV A : R2014 | Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
| ASTM F 2458 : 2005 | Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
| ASTM F 825 : 1993 : R1999 | Standard Specification for Drawers, Furniture, Marine, Steel |
| ASTM D 7149 : 2005 : R2011 : EDT 1 | Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
| ASTM D 904 : 1999 : R2008 | Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
| ASTM D 1879 : 2006 | Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation |
| ASTM D 1183 : 2003 : R2011 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D 7888 : 2013 | Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings |
| ASTM D 3166 : 1999 : R2005 | Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
| ASTM F 2523 : 2013 : REDLINE | Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers |
| ASTM D 6396 : 1999 : R2012 | Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
| ASTM D 6396 : 1999 : R2005 | Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
| ASTM D 2094 : 2000 : EDT 1 | Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
| ASTM D 3808 : 2001 : R2007 | Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
| ASTM D 2293:1996:R2002 | Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal) |
| ASTM D 2557 : 1998 : R2010 : EDT 1 | Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F) |
| ASTM D 4680 : 1998 : R2011 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 4501 : 2001 : EDT 1 | Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
| ASTM D 1876 : 2008 | Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) |
| ASTM D 5574 : 1994 : R2012 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM F 2258 : 2005 : R2010 | Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| ASTM D 4338 : 1997 : R2004 | Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
| ASTM D 5573 : 1999 : R2012 | Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM D 2294 : 1996 : R2008 | Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal) |
| ASTM D 5405/D5405M : 1998 : R2015 | Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
| ASTM D 6464 : 2003 : REV A : R2017 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 2834 : 1995 : R2002 | Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes |
| ASTM D 6411/D6411M : 1999 : R2012 | Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 4500 : 1995 | Standard Test Method for Determining Grit, Lumps, or Undissolved Matter in Water-Borne Adhesives (Withdrawn 2001) |
| ASTM D 3528 : 1996 : R2016 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 4498 : 2007 : R2015 | Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021) |
| ASTM D 3069 : 1994 : R2005 | Standard Test Method for Delivery Rate of Aerosol Products |
| ASTM F 824 : 1993 : R2017 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM D 2878 : 1995 : R2005 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| ASTM D 2295 : 1996 : R2002 | Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) |
| ASTM D 7966/D7966M : 2016 : REDLINE | Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 4027 : 1998 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 5041 : 1998 : R2012 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
| ASTM D 2296 : 2001 : R2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3070 : 2000 | Standard Test Method of Rapid Pressure Determination of Pressurized Products |
| ASTM D 5113 : 1997 : R2005 | Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
| ASTM D 2310 : 2006 : R2012 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3933 : 1998 : R2017 | Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
| ASTM D 4498 : 2007 | Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives |
| ASTM D 1875 : 2003 : R2008 : EDT 1 | Standard Test Method for Density of Adhesives in Fluid Form |
| ASTM D 3166 : 1999 : R2012 | Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) |
| ASTM D 5574 : 1994 : R2005 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 2310 : 2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM C 557 : 2003 : R2009 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 4649 : 2003 : R2009 | Standard Guide for Selection and Use of Stretch Wrap Films |
| ASTM F 2392 : 2004 : R2015 | Standard Test Method for Burst Strength of Surgical Sealants |
| ASTM D 1146 : 2000 | TEST METHOD FOR BLOCKING POINT OF POTENTIALLY ADHESIVE LAYERS |
| ASTM D 3482 : 2007 | Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives |
| ASTM F 2258 : 2005 | Standard Test Method for Strength Properties of Tissue Adhesives in Tension |
| ASTM D 5999 : 1996 | Standard Test Method for Noninterference of Adhesives in Repulping (Withdrawn 2003) |
| ASTM D 2835 : 1989 : R2017 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 899 : 2000 : R2018 | Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive |
| ASTM D 6463/D6463M : 2006 : R2012 | Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
| ASTM F 2468 : 2005 : R2011 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 1062 : 2008 | Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds |
| ASTM D 4027 : 1998 : R2004 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 1582 : 1998 : R2011 | Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 1489 : 2009 : R2016 | Standard Test Method for Nonvolatile Content of Aqueous Adhesives |
| ASTM D 1144:1999 | Standard Practice for Determining Strength Development of Adhesive Bonds |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM D 6325 : 1998 : R2004 | Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
| ASTM D 4339 : 2001 : R2007 | Standard Test Method for Determination of the Odor of Adhesives |
| ASTM D 6463/D6463M : 2006 | Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading |
| ASTM D 5040 : 1990 : R2011 | Standard Test Methods for Ash Content of Adhesives |
| ASTM D 2651 : 2001 : R2016 | Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
| AASHTO MP 22 : 2013(R 2019) | SPECIFICATION FOR FIBER-REINFORCED POLYMER COMPOSITE MATERIALS FOR HIGHWAY AND BRIDGE STRUCTURES |
| ASTM D 4501 : 2001 : R2014 | Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
| ASTM D 2093 : 2003 : R2017 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
| ASTM D 1488 : 2000 : R2013 | Standard Test Method for Amylaceous Matter in Adhesives |
| ASTM D 1874 : 2016 : REDLINE | Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases |
| ASTM F 823 : 1993 : R2004 | Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
| ASTM D 3528 : 1996 : R2002 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 3528 : 1996 : R2008 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
| ASTM D 3762 : 2003 : R2010 | Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) (Withdrawn 2019) |
| ASTM D 1338:1999 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM D 6105 : 2004 : R2012 | Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding |
| ASTM D 4800 : 1994 : R1999 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 1995 : 1992 : R2011 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 1582 : 1998 | Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D 1875 : 2003 : R2013 | Standard Test Method for Density of Adhesives in Fluid Form |
| ASTM D 2835 : 1989 : R1998 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 2307 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3930 : 2008 : R2015 | Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
| ASTM D 2295 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA O112.9 : 2010 | EVALUATION OF ADHESIVES FOR STRUCTURAL WOOD PRODUCTS (EXTERIOR EXPOSURE) |
| ASTM D 1488 : 2000 : R2006 | Standard Test Method for Amylaceous Matter in Adhesives |
| ASTM F 826 : 1994 : R1999 | Standard Specification for Tops, Furniture, Marine, Steel |
| AASHTO TP 84 : 2011: R2014 | METHOD OF TEST FOR EVALUATION OF ADHESIVE ANCHORS IN CONCRETE UNDER SUSTAINED LOADING CONDITIONS |
| ASTM D 6383 : 1999 : EDT 1 | Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D 903 : 1998 : R2010 | Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D 2094 : 2000 : R2014 | Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
| ASTM D 7149 : 2005 : R2016 | Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
| ASTM C 557 : 2003 : EDT 1 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 2918 : 1999 : R2005 | Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
| ASTM D 1490 : 2001 : R2006 | Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
| ASTM D 2835 : 1989 : R2012 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 5573 : 1999 | Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM D 2918 : 1999 : R2012 | Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel |
| ASTM D 2094 : 2000 : R2006 | Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests |
| ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM D 2095 : 1996 : R2002 | Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
| ASTM D 3310 : 2000 : R2014 | Standard Test Method for Determining Corrosivity of Adhesive Materials |
| ASTM F 2255 : 2005 : R2010 | Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading |
| ASTM D 896 : 2004 : R2010 : EDT 1 | Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
| ASTM D 5868 : 2001 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 1062 : 2008 : R2015 | Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds |
| ASTM F 2256 : 2005 : R2010 | Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
| ASTM D 3433 : 1999 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
| ASTM D 1828 : 2001 : R2013 | Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures |
| ASTM C 557 : 2003 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 4688/D4688M : 2014 : REDLINE | Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
| ASTM D 1995 : 1992 : R2017 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
| ASTM D 906 : 1998 : R2004 | Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
| ASTM F 822 : 1993 | FPECIFICATION FOR CHEST OF DRAWERS (CHIFFONIER), STEEL, MARINE |
| ASTM D 3632 : 1998 : R2011 | Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 1488 : 2000 | Standard Test Method for Amylaceous Matter in Adhesives |
| ASTM D 7532:2009 | Standard Practice for Determination of Re-tack Ability of Carpet Adhesives |
| ASTM D 2739 : 1997 : R2017 | Standard Test Method for Volume Resistivity of Conductive Adhesives |
| ASTM D 906 : 1998 : R2017 | Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading |
| ASTM D 1916 : 1993 : R1997 | Standard Test Method for Penetration of Adhesives (Withdrawn 2005) |
| ASTM D 3933 : 1998 : R2004 | Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing) |
| ASTM D 1779 : 1998 : R2011 | Standard Specification for Adhesive for Acoustical Materials |
| ASTM D 3807 : 1998 : R2012 | Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics) |
| ASTM D 950 : 2003 : R2011 | Standard Test Method for Impact Strength of Adhesive Bonds |
| ASTM D 8089 : 2017 | Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM D 4027 : 1998 : R2011 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 4800 : 1994 : R2005 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 4338 : 1997 : R2016 | Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
| ASTM D 2739 : 1997 | Standard Test Method for Volume Resistivity of Conductive Adhesives |
| ASTM D 5648 : 2001 : R2019 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 1101 : 1997 : REV A | Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
| ASTM D 2308 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2319/D2319M : 1998 : R2008e1 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 5657 : 2007 : R2014 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM D 5113:1997 | Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
| ASTM F 782 : 2001 | Standard Specification for Doors, Furniture, Marine |
| ASTM D 5215 : 1993 | TEST METHOD FOR INSTRUMENTAL EVALUATION OF STAINING OF VINYL FLOORING BY ADHESIVES |
| ASTM D 5824 : 1998 : R2011 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 3983 : 1998 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 2739 : 1997 : R2010 | Standard Test Method for Volume Resistivity of Conductive Adhesives |
| ASTM D 1490 : 2001 : R2018 | Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions |
| ASTM D 2307 : 2007A | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 6412/D6412M : 1999 : R2005 | Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials |
| ASTM D 6005 : 2003 : R2008 | Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
| ASTM D 3164 : 2003 : R2011 | Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading |
| ASTM D 2851 : 2015 : REDLINE | Standard Specification for Liquid Optical Adhesive |
| ASTM D 6005 : 2003 : R2009 | Standard Test Method for Determining Slump Resistance of Carpet Adhesives |
| ASTM F 2458 : 2005 : R2010 | Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants |
| ASTM D 1101 : 1997 : REV A : R2006 | Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
| ASTM D 1583 : 2001 : R2018 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
| ASTM F 822 : 1993 : R2010 | Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
| ASTM D 3310 : 2000 | Standard Test Method for Determining Corrosivity of Adhesive Materials |
| ASTM D 4680 : 1998 : R2017 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 7247 : 2017 : REDLINE | Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures |
| ASTM D 1101 : 1997 : REV A : R2013 | Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
| ASTM D 2307 : 2007A : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM F 2468 : 2005 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 5113 : 1997 : R2011 : EDT 1 | Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam |
| ASTM D 2294 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2651 : 2001 | Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
| ASTM D 3433 : 1999 : R2012 | Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints |
| ASTM F 2256 : 2005 : R2015 | Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM F 782 : 2001 : R2007 | Standard Specification for Doors, Furniture, Marine |
| ASTM D 7446 : 2009 : R2017 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
| ASTM D 4339 : 2001 | Standard Test Method for Determination of the Odor of Adhesives |
| ASTM D 6465 : 1999 : R2012 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 5572 : 1995 : R2012 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM D 4339 : 2001 : R2013 | Standard Test Method for Determination of the Odor of Adhesives |
| ASTM F 822 : 1993 : R1999 | Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
| ASTM D 897 : 2008 | Standard Test Method for Tensile Properties of Adhesive Bonds |
| ASTM D 4562 : 2001 : R2013 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM F 825 : 1993 : R2017 | Standard Specification for Drawers, Furniture, Marine, Steel |
| ASTM D 6195 : 2003 | Standard Test Methods for Loop Tack |
| ASTM D 904 : 1999 | Standard Practice for Exposure of Adhesive Specimens to Artificial Light |
| ASTM D 6465 : 1999 : R2016 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 3929 : 2003 : R2010 : EDT 1 | Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method |
| ASTM D 2739 : 1997 : R2004 | Standard Test Method for Volume Resistivity of Conductive Adhesives |
| ASTM F 826 : 1994 : R2004 | Standard Specification for Tops, Furniture, Marine, Steel |
| ASTM D 6464 : 2003 : REV A : R2009 : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 1184 : 1998 | Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| ASTM D 896 : 2004 : R2017 | Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents |
| ASTM D 3023 : 1998 : R2003 | Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents |
| ASTM D 5215 : 1993 : R2005 | Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
| ASTM D 6105 : 2004 | Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding |
| ASTM D 2878 : 2010 : R2016 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| ASTM D 5573 : 1999 : R2005 | Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM F 824 : 1993 : R2004 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM D 2095 : 1996 : EDT 1 | Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
| ASTM D 2843 : 1999 : R2004 : EDT 1 | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
| ASTM D 5040 : 1990 : R1997 : EDT 1 | Standard Test Methods for Ash Content of Adhesives |
| ASTM D 4688 : 1999 | Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
| ASTM D 6396 : 19991 | Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees |
| ASTM D 1338 : 1999 : R2005 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM D 5648 : 2001 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM C 557 : 2003 : R2017 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM D 5656 : 2010 | Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading |
| ASTM D 7149 : 2005 | Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
| ASTM D 5405 : 1998 | Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
| ASTM D 3121 : 2017 | Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball |
| ASTM D 4896 : 2001 | Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
| ASTM D 4501 : 2001 : R2009 : EDT 1 | Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
| ASTM F 826 : 1994 : R2017 | Standard Specification for Tops, Furniture, Marine, Steel |
| ASTM D 903 : 1998 | Standard Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D 6862:2011 | Standard Test Method for 90 Degree Peel Resistance of Adhesives |
| ASTM D 1781 : 1998 | Standard Test Method for Climbing Drum Peel for Adhesives |
| ASTM D 4338 : 1997 : R2011 : EDT 1 | Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
| ASTM D 6325 : 1998 : R2011 | Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| ASTM D 4680 : 1998 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D 3983 : 1998 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM D 2990 : 2017 : REDLINE | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM D 4027 : 1998 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
| ASTM D 5266 : 2013 : REDLINE | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.