BS 5628-3:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Code of practice for use of masonry Materials and components, design and workmanship
Hardcopy , PDF
29-12-2005
English
15-10-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and components
4.1 General
4.2 Masonry units
4.3 Materials for mortar
4.4 Cavity wall ties
4.5 Metal support and restraint components
4.6 Reinforcement
4.7 Damp-proof courses (DPCs), including cavity trays
4.8 Sealants
4.9 Airbricks, gratings and flues
4.10 Sills
4.11 Lintels
4.12 Copings
4.13 Flashings and weatherings
4.14 Insulation materials
5 Design
5.1 General
5.2 Design for stability
5.3 Structural detailing for stability
5.4 Movement in masonry
5.5 Exclusion of water
5.6 Durability
5.7 Mortars
5.8 Fire resistance
5.9 Thermal performance
5.10 Sound control
5.11 Masonry bonds and other constructional details
6 Workmanship
Annex A (normative) - BS 8000-3:2001, Workmanship
Building sites - Part 3: Code of
Practice for masonry
A.1 - Introduction
A.2 - Scope
A.3 - Definitions
A.4 - Materials, handling and
preparation
A.5 - Brick/block walling
Annex B (informative) - Determination of movement in
Masonry
B.1 - General
B.2 - Determination of total
movement within a wall
B.3 - Determination of spacing and
Widths of movement joints
B.4 - Thermal movement
B.5 - Moisture movement
B.6 - Movement due to carbonation
Annex C (informative) - Joint finishes
Annex D (informative) - Appearance of bricks, and of
facing brick and block masonry
D.1 - General guidance on the
appearance of bricks
D.2 - Assessment of the visual
acceptability of facing bricks
D.3 - Assessment of the visual
acceptability of aggregate
concrete block masonry
Annex E (informative) - Checklist for ordering clay and
calcium silicate bricks
Bibliography
Gives general recommendations for the design, construction and workmanship of masonry, including materials and components and the main aspects of design, other than structural.
| Committee |
B/525/6
|
| DevelopmentNote |
Supersedes BS 5390(1976), BS 5628:PT3(1985) and 99/105057 DC (08/2001)
|
| DocumentType |
Standard
|
| Pages |
132
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| Supersedes |
| BS 476-23:1987 | Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| BS 882:1992 | Specification for aggregates from natural sources for concrete |
| BS 1289-1:1986 | Flue blocks and masonry terminals for gas appliances Specification for precast concrete flue blocks and terminals |
| BS EN 10088-1:2014 | Stainless steels List of stainless steels |
| BS 5977-2:1983 | Lintels Specification for prefabricated lintels |
| BS 8000-3:1989 | Workmanship on building sites Code of practice for masonry |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS 6676-2:1986 | Thermal insulation of cavity walls using man-made mineral fibre batts (slabs) Code of practice for installation of batts (slabs) filling the cavity |
| BS 8004:1986 | Code of practice for foundations |
| BS EN 1806:2006 | Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods |
| BS 3837-2:1990 | Expanded polystyrene boards Specification for extruded boards |
| BS ISO 11600:2002 | Building construction. Jointing products. Classification and requirements for sealants |
| BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
| BS 3837-1:1986 | Expanded polystyrene boards Specification for boards manufactured from expandable beads |
| BS EN 10143:2006 | Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape |
| BS 6561:1985 | Specification for zinc alloy sheet and strip for building |
| BS 8000-2.1:1990 | Workmanship on building sites. Code of practice for concrete work Mixing and transporting concrete |
| BS 1186-2:1988 | Timber for and workmanship in joinery Specification for workmanship |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| BS 8000-2.2:1990 | Workmanship on building sites. Code of practice for concrete work Sitework with in situ and precast concrete |
| BS 6178-1:1982 | Joist hangers Specification for joist hangers for building into masonry walls of domestic dwellings |
| BS 5262:1991 | Code of practice for external renderings |
| BS 6399-3(1988) : 1988 | LOADING FOR BUILDINGS - PART 3: CODE OF PRACTICE FOR IMPOSED ROOF LOADS |
| BS DD140-2(1987) : 1987 | WALL TIES - RECOMMENDATIONS FOR DESIGN OF WALL TIES |
| BS 6515:1984 | Specification for polyethylene damp-proof courses for masonry |
| BS 4729:1990 | Specification for dimensions of bricks of special shapes and sizes |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| BS EN ISO 14713:1999 | Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines |
| BS 4721:1981 | Specification for ready-mixed building mortars |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS EN 12588:2006 | Lead and lead alloys. Rolled lead sheet for building purposes |
| BS 6588:1996 | Specification for Portland pulverized-fuel ash cements |
| BS 6461-1:1984 | Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for masonry chimneys and flue pipes |
| BS 7456:1991 | Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems |
| BS 5617:1985 | Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
| BS 476-21:1987 | Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction |
| BS 187:1978 | Specification for calcium silicate (sandlime and flintlime) bricks |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| BS 8000-16(1997) : 1997 | WORKMANSHIP ON BUILDING SITES - PART 16: CODE OF PRACTICE FOR SEALING JOINTS IN BUILDINGS USING SEALANTS |
| BS EN 942:2007 | Timber in joinery. General requirements |
| BS EN 490 : 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| BS 6457:1984 | Specification for reconstructed stone masonry units |
| BS EN 1304:2013 | Clay roofing tiles and fittings. Product definitions and specifications |
| BS 5838-2:1980 | Specification for dry packaged cementitious mixes Prepacked mortar mixes |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| BS 1186-3:1990 | Timber for and workmanship in joinery Specification for wood trim and its fixing |
| BS 5628-2:1995 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 6398:1983 | Specification for bitumen damp-proof courses for masonry |
| BS 1197-2:1973 | Specification for concrete flooring tiles and fittings Metric units |
| BS 6073-1:1981 | Precast concrete masonry units Specification for precast concrete masonry units |
| BS 6510:1984 | Specification for steel windows, sills, window boards and doors |
| BS 6676-1:1986 | Thermal insulation of cavity walls using man-made mineral fibre batts (slabs) Specification for man-made mineral fibre batts (slabs) |
| BS DD140-1(1986) : 1986 | WALL TIES - METHODS OF TEST FOR MORTAR JOINT AND TIMBER FRAME CONNECTIONS |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS 4887-1:1986 | Mortar admixtures Specification for air-entraining (plasticizing) admixtures |
| BS EN 573-4:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
| BS 6213(2000) : 2000 | SELECTION OF CONSTRUCTION SEALANTS - GUIDE |
| BS 4027:1996 | Specification for sulfate-resisting Portland cement |
| BS 5618:1985 | Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems |
| BS 476-22:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction |
| BS 6399-1:1996 | LOADING FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DEAD AND IMPOSED LOADS |
| BS 6649:1985 | Specification for clay and calcium silicate modular bricks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.