• There are no items in your cart

BS 5908:1990

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Code of practice for fire precautions in the chemical and allied industries

Available format(s)

Hardcopy , PDF

Superseded date

31-12-2012

Superseded by

BS 5908-1:2012

Language(s)

English

Published date

31-05-1990

€371.62
Excluding VAT

Foreword
Committees responsible
Code of practice
Section one. General
1 Scope
2 Definitions
Section two. Legal background
3 General
4 Statutory requirements
Section three. Principles of initiation, spread and
                  extinction of fire
5 Terminology
6 Explosion
7 Modes of ignition
8 Smoke
9 Modes of combustion
10 Controlling fire
11 Principles of extinction
Section four. Site selection and layout
12 Selection of site
13 Access for firefighting vehicles and firefighting
    within the site
14 Water supplies
15 Drainage, interceptors, gas traps and bunds
16 Storage and loading areas
17 Segregation
Section five. Buildings and structures
18 General
19 Legal and insurance considerations
20 Change of process or usage
21 Siting of buildings and plant
22 Design and compartmentation
23 Principles of structural fire protection
24 Means of escape in case of fire
25 Lighting
26 Space heating
27 Explosion relief in buildings
28 Protection against lightning
29 Storage buildings for combustible or flammable
    materials
Section six. Storage and movement of materials
30 Introduction
31 Principles of safe storage
32 General storage
33 Bulk storage of flammable liquids and gases
34 Powered equipment and vehicles
35 Waste materials
Section seven. Design of process plant
36 Introduction
37 Process vessels
38 Piping systems and valves
39 Pumps and pumping systems
40 Compressors
41 Furnaces, ovens and driers
42 Centrifuges
43 Relief systems
44 Process instrumentation
45 Dust handling hazards
46 Thermal insulation
Section eight. Operation of process plant
47 Organization
48 Plant instructions and operator training
Section nine. Maintenance of process plant
49 Introduction
50 Maintenance activities
51 Permits to work
52 Welding, burning and similar operations
Section ten. Fire prevention
53 General principles
54 Control over flammable materials
55 Monitoring the atmosphere
56 Control over sources of ignition
57 Electrical equipment
58 Static electricity
59 Fire hazards in ventilation ducting
Section eleven. Fire defence
60 Fire warning and alarms
61 Fire defence plan
62 Emergency plant shut down
63 Fire detection
Section twelve. Works fire brigades
64 Organization, manning and training
65 Equipment
Section thirteen. Classification of fires and selection
                  of extinguishing media
66 Classification of fires
67 Extinguishing media
Section fourteen. Fixed fire extinguishing systems
68 Fixed water systems
69 Fixed foam systems
70 Water supplies for firefighting
71 Fire hydrant systems and mains
72 Rising mains
73 Fixed powder systems
74 Fixed carbon dioxide systems
75 Fixed halon systems
76 Fixed inert gas systems
77 Fixed explosion suppression systems
78 Fixed protecting systems in confined spaces
Section fifteen. Portable and transportable
79 Portable equipment
80 Transportable monitors
81 Mobile trailer pumps and portable pumps
82 Motorized fire appliances
Section sixteen. Organization of emergency procedures
83 General
84 Recognition of the hazards
85 Control of an incident
86 Training of personnel
Appendices
A Regulations and orders with specific fire precaution
    requirements likely to apply to chemical plant
B Statutory and advisory bodies
C Halons: physical properties
D Bibliography
E List of references to UK publications
F List of references to overseas publications
Tables
1 Damage caused at various incident power levels from
    a steady state fire
2 Fireball radiation dose criteria
3 Physical properties of halons

Guidance on the nature of fire hazards. Includes plant design, storage and movement of materials, fire prevention measures and emergency procedures.

Committee
EXL/23
DevelopmentNote
Supersedes 88/36927 DC and BS 5908(1980) (09/2005) Reviewed and confirmed by BSI, January 2008. (12/2007)
DocumentType
Standard
Pages
104
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

BS 476-23:1987 Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure
BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion
BS 6020-5:1982 Instruments for the detection of combustible gases Specification for performance requirements for Group II instruments reading up to 100% gas
BS 5930:1981 Code of practice for site investigations
BS 799-2:1981 Specification for oil burning equipment Vaporizing burners
BS 5588-9:1989 Fire precautions in the design, construction and use of buildings Code of practice for ventilation and air conditioning ductwork
BS 1600-2:1970 Specification for dimensions of steel pipe for the petroleum industry Metric units
BS 5410-3:1976 Code of practice for oil firing Installations for furnaces, kilns, ovens and other industrial purposes
BS 1600-1:1970 Specification for dimensions of steel pipe for the petroleum industry Imperial units
BS 1710:1984 Specification for identification of pipelines and services
BS 4434-1:1980 Specification for requirements for refrigeration safety. General
BS 5429:1976 Code of practice for safe operation of small-scale storage facilities for cryogenic liquids
BS 3606:1978 Specification for steel tubes for heat exchangers
BS 8010-1:1989 Code of practice for pipelines Pipelines on land: general
BS 6020-1:1981 Instruments for the detection of combustible gases Specification for general requirements and test methods
BS 5839-1:1988 Fire detection and alarm systems for buildings Code of practice for system design, installation and servicing
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
API 2000 : 2014 VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
BS 5306-5.1(1982) : 1982 FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - HALON SYSTEMS - HALON 1301 TOTAL FLOODING SYSTEMS
BS 6657:1986 Guide for prevention of inadvertent initiation of electro-explosive devices by radio-frequency radiation
BS 4422-7:1988 Glossary of terms associated with fire Explosion detection and suppression means
BS 5345-3:1979 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection \'d\'. Flameproof enclosure
BS 3811:1984 Glossary of maintenance management terms in terotechnology
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
BS 6150:1982 Code of practice for painting of buildings
BS 6020-2:1981 Instruments for the detection of combustible gases Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
BS 5306-6.1:1988 Fire extinguishing installations and equipment on premises. Foam systems Specification for low expansion foam systems
BS 3602:1962 Specification for steel pipes and tubes for pressure purposes. Carbon steel high duties.
BS 5345-8:1980 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection \'s\'. Special protection
BS 6756:1986 Specification for fibre rope cargo nets
BS 5306-7:1988 Fire extinguishing installations and equipment on premises Specification for powder systems
BS 6575:1985 Specification for fire blankets
ASME B31.4 : 2016 PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
BS CP1017(1969) : AMD 1540 DISTRIBUTION OF ELECTRICITY ON CONSTRUCTION AND BUILDING SITES
BS 6713-2:1986 Explosion protection systems Method for determination of explosion indices of combustible gases in air
BS 5274:1985 Specification for fire hose reels (water) for fixed installations
BS 6700:1987 Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS 1560-2:1970 Circular flanges for pipes, valves and fittings (Class designated) Specification for steel pipe flanges (nominal sizes ½ in to 24 in). Metric dimensions
BS 5306-0:1986 Fire extinguishing installations and equipment on premises Guide for the selection of installed systems and other fire equipment
BS 6020-3:1982 Instruments for the detection of combustible gases Specification for safety and performance requirements for Group I instruments reading up to 100% methane
BS 6759-3:1984 Safety valves Specification for safety valves for process fluids
BS 5041-3:1975 Fire hydrant systems equipment Specification for inlet breechings for dry riser inlets
BS 5501-4:1977 Electrical apparatus for potentially explosive atmospheres Powder filling \'q\'
BS 6226:1982 Specification for low voltage switchgear and controlgear for industrial use. Inductive proximity switches. Definitions, classification and designation
BS 5345-4:1977 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection \'i\'. Intrinsically safe electrical apparatus and systems
BS 6467-2:1988 Electrical apparatus with protection by enclosure for use in the presence of combustible dusts Guide to selection, installation and maintenance
BS 5041-1:1987 Fire hydrant systems equipment Specification for landing valves for wet risers
BS 5501-7:1977 Electrical apparatus for potentially explosive atmospheres Intrinsic safety \'i\'
API 521 : 2014 PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
BS 476-20:1987 Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles)
BS 5501-6:1977 Electrical apparatus for potentially explosive atmospheres Increased safety \'e\'
BS 5885(1980) : AMD 5019 INDUSTRIAL GAS BURNERS, OF INPUT RATING 60 KW AND ABOVE
BS 5345-7:1979 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection N
BS 476-21:1987 Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction
BS 5501-1:1977 Electrical apparatus for potentially explosive atmospheres General requirements
BS 5146-1:1974 Inspection and test of valves Specification for steel valves for the petroleum, petrochemical and allied industries
BS 5041-5:1974 Fire hydrant systems equipment Specification for boxes for foam inlets and dry riser inlets
BS 6713-3:1986 Explosion protection systems Method for determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures
BS 5501-5:1977 Electrical apparatus for potentially explosive atmospheres Flameproof enclosure \'d\'
BS 5423:1987 Specification for portable fire extinguishers
BS 5306-6.2:1989 Fire extinguishing installations and equipment on premises. Foam systems Specification for medium and high expansion foam systems
BS 5445-8:1984 Components of automatic fire detection systems Specification for high temperature heat detectors
BS 5306-1:1976 Fire extinguishing installations and equipment on premises Hydrant systems, hose reels and foam inlets
BS 4683-1:1971 Specification for electrical apparatus for explosive atmospheres Classification of maximum surface temperatures
BS 5345-2:1983 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Classification of hazardous areas
BS 4211:1987 Specification for ladders for permanent access to chimneys, other high structures, silos and bins
BS 6713-4:1986 Explosion protection systems Method for determination of efficacy of explosion suppression systems
BS 5500:1988 Specification for unfired fusion welded pressure vessels
BS 5041-4:1975 Fire hydrant systems equipment Specification for boxes for landing valves for dry risers
BS 5345-6:1978 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Recommendations for type of protection \'e\'. Increased safety
BS 476-24:1987 Fire tests on building materials and structures Method for determination of the fire resistance of ventilation ducts
BS 5422:1990 Method for specifying thermal insulating materials on pipes, ductwork and equipment (in the temperature range -40°C to +700°C)
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
BS 6467-1:1985 Electrical apparatus with protection by enclosure for use in the presence of combustible dusts Specification for apparatus
BS 6656:1991 Guide to prevention of inadvertent ignition of flammable atmospheres by radio-frequency radiation
BS 5839-4:1988 Fire detection and alarm systems for buildings Specification for control and indicating equipment
BS CP1013(1965) : LATEST EARTHING
BS 4547:1972 Classification of fires
BS 5970:1981 Code of practice for thermal insulation of pipework and equipment (in the temperature range -100°C to +870°C)
BS 5501-2:1977 Electrical apparatus for potentially explosive atmospheres Oil immersion \'o\'
BS 4741:1971 Specification for vertical cylindrical welded steel storage tanks for low-temperature service: single-wall tanks for temperatures down to -50°C
BS 4422-6:1988 Glossary of terms associated with fire Evacuation and means of escape
BS 4683-2:1971 Specification for electrical apparatus for explosive atmospheres The construction and testing of flameproof enclosures of electrical apparatus
BS 5345-1:1989 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) General recommendations
BS 5445-5:1977 Components of automatic fire detection systems Heat sensitive detectors - point detectors containing a static element
BS 6941:1988 Specification for electrical apparatus for explosive atmospheres with type of protection N
BS 5445-1:1977 Components of automatic fire detection systems Introduction
BS 5306-3:1985 Fire extinguishing installations and equipment on premises Code of practice for selection, installation and maintenance of portable fire extinguishers
BS 6713-1:1986 Explosion protection systems Method for determination of explosion indices of combustible dusts in air
BS 7244:1990 Specification for flame arresters for general use
BS 5958-1:1980 Code of practice for control of undesirable static electricity General considerations
BS 5501-3:1977 Electrical apparatus for potentially explosive atmospheres Pressurized apparatus \'p\'
BS CP2010-2(1970) : 1970 PIPELINES - PART 2: DESIGN AND CONSTRUCTION OF STEEL PIPELINES IN LAND
BS 5958-2:1983 Code of practice for control of undesirable static electricity Recommendations for particular industrial situations
API 520-2 : 2015 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
BS 4422-4:1975 Glossary of terms associated with fire Fire protection equipment
BS 476-22:1987 Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction
BS 6020-4:1981 Instruments for the detection of combustible gases Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
BS 5445-7:1984 Components of automatic fire detection systems Specification for point-type smoke detectors using scattered light, transmitted light or ionization

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.