• Shopping Cart
    There are no items in your cart

BS 6180:2011

Current

Current

The latest, up-to-date edition.

Barriers in and about buildings. Code of practice

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-03-2011

€322.53
Excluding VAT

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials, components and methods of design
   and construction
5 Preliminary considerations
6 Design criteria
7 Concrete
8 Glass
9 Masonry
10 Metals
11 Plastics
12 Timber
13 Composites
14 Installation
Annexes
Annex A (normative) - Vehicle impact on barriers
Annex B (normative) - Bolt fixing of glass in barriers
Bibliography

Provides recommendations and guidance for the design and construction of temporary and permanent barriers to be provided in and about buildings and places of assembly, such barriers being positioned and designed to protect persons from various hazards and to restrict or control the movement of persons or vehicles.

Committee
B/208
DevelopmentNote
Supersedes BS 6180(1999) and 10/30212801 DC. (03/2011)
DocumentType
Standard
Pages
54
PublisherName
British Standards Institution
Status
Current

This British Standard gives recommendations and guidance for the design and construction of temporary and permanent barriers to be provided in and about buildings and places of assembly, such barriers being positioned and designed to protect persons from various hazards and to restrict or control the movement of persons or vehicles. This British Standard applies to: barriers that indicate routes; barriers capable of stopping or diverting moving vehicles within areas where vehicle speed is restricted to a maximum of 16km/h (4.44m/s, 10 mile/h); walls, glazing and other elements of buildings or structures where such elements act as protective barriers; areas other than spectator areas of sports halls and buildings used for spectator sports. This British Standard does not apply to: barriers for resisting impact from vehicles travelling at speeds greater than 16km/h, e.g. bridge parapets beyond the curtilage of a building, or highway safety barriers (see BS6779); barriers used in building operations and works of engineering construction; safety barriers, with or without opening gate features, for the protection of children up to 24 months, where the safety requirement is covered by a specific safety standard, e.g. BSEN1930; permanent means of access to machinery (see BSENISO14122, all parts); barriers used in spectator areas of sports halls, and buildings used for spectator sports (see BSEN13200, all parts).

BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion
ISO 7599:2010 Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium
BS EN 10253-1:1999 Butt-welding pipe fittings Wrought carbon steel for general use and without specific inspection requirements
BS EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS 4921:1988 Specification for sherardized coatings on iron or steel
BS EN 12167:2011 Copper and copper alloys. Profiles and bars for general purposes
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 10088-3:2014 Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN 10143:2006 Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape
BS EN ISO 2560:2009 Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
BS 6206:1981 Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings
BS 6150(2006) : 2006 PAINTING OF BUILDINGS - CODE OF PRACTICE
BS 6496:1984 Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings
BS EN 10217-7:2014 Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
BS EN 10216-5:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
BS EN 572-3:2012 Glass in building. Basic soda lime silicate glass products Polished wired glass
BS EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
BS EN 1991-1-1:2002 Eurocode 1. Actions on structures General actions - Densities, self-weight, imposed loads for buildings
BS EN 1090-1 : 2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
BS 4729(2005) : 2005 CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS
BS EN ISO 7599:2010 Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium
BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
BS EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
BS EN 1991-1-4 : 2005 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
DD CEN/TS 15680 : DRAFT 2007 PREFABRICATED TIMBER STAIRS - MECHANICAL TEST METHODS
BS 6270-3:1991 Code of practice for cleaning and surface repair of buildings Metals (cleaning only)
BS EN 1982:2017 Copper and copper alloys. Ingots and castings
BS EN 1011-2:2001 Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels
BS EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels Tolerances, dimensions and sectional properties
BS EN 1930:2011 Child use and care articles. Safety barriers. Safety requirements and test methods
BS 4842:1984 Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings
BS EN ISO 6158:2011 Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes
BS EN 12206-1:2004 Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder
BS 5642-2(1983) : 1983 SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE
BS EN 572-6:2012 Glass in building. Basic soda lime silicate glass products Wired patterned glass
PD 6484:1979 Commentary on corrosion at bimetallic contacts and its alleviation
BS 4592-0(2006) : 2006 FLOORING, STAIR TREADS AND HANDRAILS FOR INDUSTRIAL USE - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION
BS EN 12163:2011 Copper and copper alloys. Rod for general purposes
BS EN ISO 2063:2005 Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys
BS EN 12164:2011 Copper and copper alloys. Rod for free machining purposes
BS EN ISO 3882:2003 Metallic and other inorganic coatings. Review of methods of measurement of thickness
BS EN 1011-1:2009 Welding. Recommendations for welding of metallic materials General guidance for arc welding

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.