BS EN 12574-2:2017
Current
The latest, up-to-date edition.
Stationary waste containers Performance requirements and test methods
Hardcopy , PDF
English
28-02-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Tests
5 Tests report
Annex A (normative) - Device for ball drop test
Annex B (informative) - Apparatus for lateral
impact test on inclined plane
Annex C (normative) - Weathering tests
Annex D (informative) - A-deviations
Bibliography
Defines the test methods for stationary waste containers (in the text also called containers) according to EN 12574-1:2017. Also specifies the target requirements to be reached either during or after the tests.
| Committee |
B/183
|
| DevelopmentNote |
Supersedes 96/107045 DC. (05/2002) Supersedes 03/116049 DC (03/2006) Supersedes 15/30323520 DC. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of EN12574 specifies the test methods for stationary waste containers (in the text also called containers) according to EN12574‑1:2017 . It also specifies the target requirements to be reached either during or after the tests.
| Standards | Relationship |
| DIN EN 12574-2:2015-08 (Draft) | Identical |
| SN EN 12574-2 : 2017 | Identical |
| UNE-EN 12574-2:2007 | Identical |
| UNI EN 12574-2 : 2006 | Identical |
| EN 12574-2:2017 | Identical |
| NBN EN 12574-2 : 2006 | Identical |
| NEN EN 12574-2 : 2017 | Identical |
| NS EN 12574-2 : 2017 | Identical |
| I.S. EN 12574-2:2017 | Identical |
| NF EN 12574-2 : 2017 | Identical |
| UNE-EN 12574-2:2017 | Identical |
| DIN EN 12574-2:2017-05 | Identical |
| 04/30050096 DC : DRAFT NOV 2004 | BS 5906 - WASTE MANAGEMENT IN BUILDINGS - CODE OF PRACTICE |
| BS 5906:2005 | Waste management in buildings. Code of practice |
| EN 1501-2:2005+A1:2009 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| EN 12574-1:2017 | Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design |
| EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 12574-3:2017 | Stationary waste containers - Part 3: Safety and health requirements |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| EN 1501-1:2011+A1:2015 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN ISO 877:1996 | Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 840-5:2012 | Mobile waste and recycling containers - Part 5: Performance requirements and test methods |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.