BS EN 16245-2:2013
Current
The latest, up-to-date edition.
Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
Hardcopy , PDF
English
30-06-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Content of a declaration
5 Specific declaration requirements
Annex A (normative) - Non-reinforced/clear cast
mouldings of unsaturated polyesters and
vinyl ester
Bibliography
Describes the minimum information to be declared for resins, curing systems, additives and modifiers to be used for the manufacturing of composites products.
| Committee |
PRI/42
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This European Standard specifies the minimum information to be declared for resins, curing systems, additives and modifiers to be used for the manufacturing of composites products. These specific declaration requirements are in addition to the general requirements given in EN 16245-1. This document includes requirements for the Certificate of Analysis (CoA). The purpose of the CoA is to verify that material properties and quality conforms to the declared values.
| Standards | Relationship |
| EN 16245-2:2013 | Identical |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 13320:2009 | Particle size analysis Laser diffraction methods |
| EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
| ISO 2114:2000 | Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
| ASTM D 1045 : 2014 : REDLINE | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
| ISO 3521:1997 | Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage |
| EN ISO 787-5:1995 | General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:1980) |
| ISO 14848:1998 | Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C |
| EN 1557:1996 | Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission |
| ISO 5661:1983 | Petroleum products Hydrocarbon liquids Determination of refractive index |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 15512:2016 | Plastics - Determination of water content (ISO 15512:2016) |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| EN 16245-1:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| EN ISO 3521:1999 | Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997) |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
| EN ISO 584:1997 | Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982) |
| DIN 6162:1981-12 | DETERMINATION OF IODINE COLOUR NUMBER |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 15512:2016 | Plastics Determination of water content |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 787-5:1980 | General methods of test for pigments and extenders — Part 5: Determination of oil absorption value |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 4629:1996 | Binders for paints and varnishes Determination of hydroxyl value Titrimetric method |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| ISO 2211:1973 | Liquid chemical products Measurement of colour in Hazen units (platinum-cobalt scale) |
| ISO 584:1982 | Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method) |
| EN ISO 4629:1998 | Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
| ISO 3105:1994 | Glass capillary kinematic viscometers — Specifications and operating instructions |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| DIN 16945:1989-03 | REACTION RESINS - REACTANTS AND REACTION MOULDING MATERIALS - TEST METHODS |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 3838:2004 | Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.