BS EN 2435-005:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application
Hardcopy , PDF
13-08-2024
English
31-07-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Classification
5 Batch release and qualification testing
6 Designation
7 Requirements for fibre reinforced composites
Describes the requirements for a two component, chromated epoxy, high corrosion resistant primer.
| Committee |
ACE/65
|
| DevelopmentNote |
Supersedes 99/714429 DC (07/2006)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
This standard defines the requirements for a two component, chromated epoxy, high corrosion resistant primer. The coating shall be suitable for use on chromic acid anodised or conversion coated aluminium alloys and other suitably prepared substrates.
| Standards | Relationship |
| UNI EN 2435-005 : 2008 | Identical |
| NBN EN 2435-005 : 2006 | Identical |
| NEN EN 2435-005 : 2006 | Identical |
| DIN EN 2435-005:2007-08 | Identical |
| NS EN 2435-005 : 1ED 2006 | Identical |
| EN 2435-005:2006 | Identical |
| NF EN 2435-005 : 2006 | Identical |
| SN EN 2435-005 : 2006 | Identical |
| I.S. EN 2435-005:2006 | Identical |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
| EN 3212:1995 | Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| ISO 1520:2006 | Paints and varnishes Cupping test |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| ISO 4628-8:2012 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| ISO 3678:1976 | Paints and varnishes — Print-free test |
| ISO 9117:1990 | Paints and varnishes — Determination of through-dry state and through-dry time — Method of test |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| ISO 4628-10:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| PREN 3837 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
| ISO 1517:1973 | Paints and varnishes Surface-drying test Ballotini method |
| ISO 1518:1992 | Paints and varnishes Scratch test |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.