ISO 7724-1:1984
|
Paints and varnishes Colorimetry Part 1: Principles |
ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method |
ISO 2812-2:2007
|
Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
PREN 3847 : 200P2
|
AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
EN 3212 : 1995
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION TEST BY ALTERNATE IMMERSION IN A BUFFERED CHLORIDE SOLUTION |
ISO 2811-3:2011
|
Paints and varnishes — Determination of density — Part 3: Oscillation method |
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 4623-2:2016
|
Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
ISO 6270-1:1998
|
Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
ISO 1520:2006
|
Paints and varnishes Cupping test |
ISO 7724-2:1984
|
Paints and varnishes Colorimetry Part 2: Colour measurement |
ISO 4628-8:2012
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
ISO 3678:1976
|
Paints and varnishes — Print-free test |
ISO 9117:1990
|
Paints and varnishes — Determination of through-dry state and through-dry time — Method of test |
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
PREN 3840 : 200P2
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
ISO 7253:1996
|
Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
ISO 7724-3:1984
|
Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
EN 2435-005:2006
|
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
ISO 11890-1:2007
|
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
ISO 4628-10:2016
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 2811-2:2011
|
Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
PREN 4160 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
PREN 3837 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
ISO 1517:1973
|
Paints and varnishes Surface-drying test Ballotini method |
ISO 1518:1992
|
Paints and varnishes Scratch test |
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
ISO 2811-4:2011
|
Paints and varnishes Determination of density Part 4: Pressure cup method |
ISO 1513:2010
|
Paints and varnishes Examination and preparation of test samples |
ISO 3251:2008
|
Paints, varnishes and plastics Determination of non-volatile-matter content |
ISO 1519:2011
|
Paints and varnishes Bend test (cylindrical mandrel) |
ISO 3680:2004
|
Determination of flash/no flash Rapid equilibrium closed cup method |
ISO 3270:1984
|
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
ISO 1524:2013
|
Paints, varnishes and printing inks Determination of fineness of grind |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
ISO 11890-2:2013
|
Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
ISO 9514:2005
|
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
ISO 2431:2011
|
Paints and varnishes Determination of flow time by use of flow cups |