IEC 61537:2006
|
Cable management - Cable tray systems and cable ladder systems
|
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
|
HD 629.2 S2:2006/A1:2008
|
TEST REQUIREMENTS ON ACCESSORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/36(42) KV - PART 2: CABLES WITH IMPREGNATED PAPER INSULATION
|
HD 622 S1:1996/A2:2005
|
Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations
|
HD 627 S1:1996/A2:2005
|
MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND
|
IEC 60228:2004
|
Conductors of insulated cables
|
IEC 60702-1:2002+AMD1:2015 CSV
|
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
|
EN 61238-1:2003
|
Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1: Test methods and requirements
|
HD 21-3 : S3 AMD 2 2008
|
POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - NON-SHEATHED CABLES FOR FIXED WIRING
|
IEC 61442:2005
|
Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
|
EN 60702-1:2002/A1:2015
|
MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES (IEC 60702-1:2002/A1:2015)
|
IEC 60050-195:1998
|
International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
|
EN 50086-2-4:1994/A1:2001
|
SPECIFICATION FOR CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR CONDUIT SYSTEMS BURIED UNDERGROUND
|
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
|
EN 60584-3:2008
|
Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
|
IEC 60364-5-51:2005
|
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
|
IEC 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
|
HD 60364-4-41:2017/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
|
HD 60364-5-54:2011/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
|
IEC 60584-3:2007
|
Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
|
HD 637 S1:1999/corrigendum:2005
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C.
|
IEC 60754-1:2011
|
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
|
EN 60228:2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES
|
EN ISO 9002:1994/AC:1997
|
QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
|
HD 22.3 S4:2004/A1:2006
|
CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSSLINKED INSULATION - PART 3: HEAT RESISTANT SILICONE RUBBER INSULATED CABLES
|
IEC 60050-442:1998
|
International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories
|
HD 22.15 : 200S2
|
CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 15: MULTICORE CABLES INSULATED AND SHEATHED WITH HEAT RESISTANT SILICONE RUBBER
|
EN 50386:2010/A1:2013
|
BUSHINGS UP TO 1 KV AND FROM 250 A TO 5 KA, FOR LIQUID FILLED TRANSFORMERS
|
IEC 61196-3:1998
|
Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks
|
HD 60364-5-51:2009/A12:2017
|
ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
|
ISO 9002:1994
|
Quality systems — Model for quality assurance in production, installation and servicing
|
EN 45510-2-8:2004
|
Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables
|
EN 60708:2005/AC:2016-08
|
LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
IEC 60754-2:2011
|
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
|
EN 50262 : 1998 AMD 2 2004
|
CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
|
IEC 61238-1:2003
|
Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
|
EN 61442:2005
|
Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
|
IEC 60079-14:2013
|
Explosive atmospheres - Part 14: Electrical installations design, selection and erection
|
ISO 9001:2015
|
Quality management systems — Requirements
|
IEC 60050-461:2008
|
International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables
|
EN 60079-14:2014/AC:2016
|
EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary
|
EN 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
|
IEC 60708:2005
|
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
|
HD 586.3 : 200S1
|
MINERAL INSULATED CABLES WITH A RATED VOLTAGE NOT EXCEEDING 750 V PART 3: GUIDE TO USE
|
HD 22-9 : 200S3
|
CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 9: SINGLE CORE HALOGEN-FREE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
|
EN 50146:2000
|
Cable ties for electrical installations
|
EN 61537:2007
|
Cable management - Cable tray systems and cable ladder systems
|
IEC 61545:1996
|
Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
|
EN 61196-3:1998
|
Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks
|
EN 45510-2-8 : 2004
|
GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES
|
EN ISO 9000:2015
|
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
|
IEC 60702-2:2002+AMD1:2015 CSV
|
Mineral insulated cables and their terminations with a rated voltagenot exceeding 750 V - Part 2: Terminations
|
HD 604 S1:1994/A3:2005
|
0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS
|
IEC 60981:2004
|
Extra heavy-duty electrical rigid steel conduits
|
EN 60702-2:2002/A1:2015
|
MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS (IEC 60702-2:2002/A1:2015)
|
HD 629.1 S2:2006/A1:2008
|
TEST REQUIREMENTS ON ACCESSORIES FOR USE ON POWER CABLES OF RATED VOLTAGE FROM 3,6/6(7,2) KV UP TO 20,8/36(42) KV - PART 1: CABLES WITH EXTRUDED INSULATION
|