BS EN 4702-03:2017
Current
The latest, up-to-date edition.
Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking
Hardcopy , PDF
English
25-10-2017
European foreword
1 Scope
2 Normative references
3 Requirements
4 Designation
5 Marking
6 Quality assurance
7 Technical Specification
Annex A (normative) - Material
Bibliography
Defines the dimensions, mass, tolerances and static values of stud - quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area.
Committee |
ACE/12
|
DevelopmentNote |
Supersedes 12/30263853 DC. (11/2017)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This European Standard specifies the dimensions, mass, tolerances and static values of stud – quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area.
Standards | Relationship |
EN 4702-03:2017 | Identical |
EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
ISO 1133-1:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
EN 1934:1998 | Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry |
ISO 11359-1:2014 | Plastics — Thermomechanical analysis (TMA) — Part 1: General principles |
IEC 62631-3-2:2015 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity |
EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
EN 62631-3-2:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC Methods) - Surface resistance and surface resistivity |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
ISO 180:2000 | Plastics Determination of Izod impact strength |
ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 307:2007 | Plastics Polyamides Determination of viscosity number |
EN 2424:2008 | Aerospace series - Marking of aerospace products |
ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
ISO 62:2008 | Plastics Determination of water absorption |
EN 4702-04:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp |
ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
ISO 178:2010 | Plastics Determination of flexural properties |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
EN 4710-01:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.