BS EN 61784-3-1:2010
Current
The latest, up-to-date edition.
Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1
Hardcopy , PDF
English
30-09-2010
0 Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, abbreviated terms and
conventions
4 Overview of FSCP 1/1 (FOUNDATION Fieldbus[TM] SIS)
5 General
6 Safety communication layer services
7 Safety communication layer protocol
8 Safety communication layer management
9 System requirements
10 Assessment
Annex A (informative) - Additional information for functional
safety communication profiles of CPF 1
Annex B (informative) - Information for assessment of the
functional safety communication profiles of CPF 1
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Defines a safety communication layer (services and protocol) based on CPF 1 of IEC 61784-1 and IEC 61158 Type 1 and 9. It also identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.
Committee |
GEL/65/3
|
DocumentType |
Standard
|
Pages |
74
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
IEC 61784-3-1:2010(E) specifies a safety communication layer (services and protocol) based on CPF 1 of IEC 61784-1 and IEC 61158 Types 1 and 9. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. The main changes with respect to the previous edition are:
- updates in relation with changes in IEC 61784-3;
- adjustment of Figure 5;
- change of sequence number from two octets to four octets in 7.2.2 to match the final protocol from the consortium;
- addition of details for time synchronization in 7.2.4;
- addition of information for safety response time in 9.3;
- addition of information in constraints for calculation of system characteristics in 9.5.
Standards | Relationship |
IEC 61784-3-1:2010 | Identical |
EN 61784-3-1:2010 | Identical |
EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
IEC 61158-4-1:2014 | Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements |
IEC 61326-3-2:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
IEC 61158-5-5:2014 | Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements |
EN 61784-3:2016/A1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017) |
IEC TR 62210:2003 | Power system control and associated communications - Data and communication security |
EN 61158-5-9:2014 | Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements |
EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
ISO 10218-1:2011 | Robots and robotic devices Safety requirements for industrial robots Part 1: Robots |
EN 61158-5-5:2014 | Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 elements |
NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
IEC 61158-6-9:2014 | Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements |
IEC TS 61000-1-2:2008 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
ISO/IEC 8802-3:2000 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications |
IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
IEC 61158-6-5:2014 | Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
IEC 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
EN 61158-6-5:2014 | Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 elements |
IEC 61158-5-9:2014 | Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 elements |
EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
IEC 61158-3-1:2014 | Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements |
ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
IEC 62280-2:2002 | Railway applications - Communication, signalling and processing systems - Part 2: Safety-related communication in open transmission systems |
ISO 14121:1999 | Safety of machinery Principles of risk assessment |
EN 61158-6-9:2014 | Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements |
ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
EN 61158-3-1:2014 | Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements |
IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO/IEC 2382-14:1997 | Information technology Vocabulary Part 14: Reliability, maintainability and availability |
EN 61158-4-1:2014 | Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 elements |
IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
ISO/IEC 2382-16:1996 | Information technology Vocabulary Part 16: Information theory |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
IEC TR 62059-11:2002 | Electricity metering equipment - Dependability - Part 11: General concepts |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
IEC 62280-1:2002 | Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in closed transmission systems |
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
IEC 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications |
IEC 61784-3:2016+AMD1:2017 CSV | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
EN 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.