BS ISO 6605:2017
Current
The latest, up-to-date edition.
Hydraulic fluid power. Test methods for hoses and hose assemblies
Hardcopy , PDF
English
31-07-2017
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Visual examination of product
5 Standard tests
6 Criteria for acceptance
7 Identification statement (reference to this document)
Bibliography
Describes uniform test methods for evaluating the performance of hoses and hose assemblies (hoses and attached hose fittings) used in hydraulic fluid power systems.
| Committee |
MCE/18/-/4
|
| DevelopmentNote |
Supersedes 16/30312462 DC. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This document specifies uniform test methods for evaluating the performance of hoses and hose assemblies (hoses and attached hose fittings) used in hydraulic fluid power systems.
Specific tests and performance criteria for evaluating hoses and hose assemblies used in hydraulic applications are in accordance with the requirements of the respective product (hoses or hose fitting) specifications.
| Standards | Relationship |
| ISO 6605:2017 | Identical |
| DEFSTAN 47-32/2(2011) : 2011 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| DEFSTAN 47-032/3(2017) : 2017 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| ISO 3862:2017 | Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| ISO 18752:2014 | Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification |
| ISO 3949:2009 | Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification |
| ISO 5598:2008 | Fluid power systems and components — Vocabulary |
| ISO 23529:2016 | Rubber — General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 23297:2008 | Thermoplastics hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
| ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
| ISO 7233:2016 | Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum |
| ISO 4957:1999 | Tool steels |
| ISO 7326:2016 | Rubber and plastics hoses — Assessment of ozone resistance under static conditions |
| ISO 12151-5:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
| ISO 4079:2017 | Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| ISO 10619-2:2011 | Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures |
| ISO 11237:2017 | Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| ISO 5893:2002 | Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 6133:2015 | Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies — Hydrostatic testing |
| ISO/TR 11340:1994 | Rubber and rubber products — Hydraulic hose assemblies — External leakage classification for hydraulic systems |
| ISO 12151-6:2009 | Connections for hydraulic fluid power and general use — Hose fittings — Part 6: Hose fittings with ISO 8434-6 60 degree cone ends |
| ISO 6803:2017 | Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |
| ISO 12151-4:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 4: Hose fittings with ISO 6149 metric stud ends |
| ISO 1436:2017 | Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 8033:2016 | Rubber and plastics hoses — Determination of adhesion between components |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
| ISO/TS 17165-2:2013 | Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.