CFR 49(PTS186-199) : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TRANSPORTATION
Publisher
Superseded date
01-10-2011
Superseded by
Sorry this product is not available in your region.
| DevelopmentNote |
Renumbered as CFR 49(PTS178-199). (03/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Code of Federal Regulations
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 4079 : 2000 : R2011 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM D 4126 : 2002 | Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
| API 2221 : 2011 | CONTRACTOR AND OWNER SAFETY PROGRAM IMPLEMENTATION |
| MIL-P-71136 Base Document:1992 | Process Specification, Ammunition, 25MM, Packaging, Packing and Marking |
| NACE SP 02 06 : 2016 | INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR PIPELINES CARRYING NORMALLY DRY NATURAL GAS (DG-ICDA) |
| MIL-A-82832 Base Document:1986 | Adhesive, Epoxy Resin, Structural Bonding (No S/S Document) |
| ASTM F 2207 : 2006 : R2013 | Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
| MIL-A-82845 Base Document:1987 | Adhesive, Paste, One-Part, Non-Asbestos (No S/S Document) |
| MIL-C-48115 Revision A:1976 | Cartridge, 40MM, HEDP, M430; Spitback Assembly for Metal Parts and Loading, Assembling and Packing |
| MIL-P-70533 Base Document:1990 | Projectile, 105mm, HE, RA XM913/XM927 Rocket Propellant For |
| MIL W 83779 : B | WATER INDICATING PASTE, METRIC |
| ASTM F 1948 : 2015 : REDLINE | Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing |
| MIL-A-3029 Revision A:1989 | Asphalt, Waterproofing (for use in Manufacture of Fiber Ammunition Containers) (S/S by ASTM-D449) |
| ASTM D 4081 : 2016 : REDLINE | Standard Specification for Drycleaning-Grade Perchloroethylene |
| ASTM D 4376 : 2015 : REDLINE | Standard Specification for Vapor-Degreasing Grade Perchloroethylene |
| API 1117 : 2008 INC ERR 2:2009 (R2013) | RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES |
| MIL-PRF-6799 Revision L:2010 | Coatings, Sprayable, Strippable, Protective, Water Emulsion |
| MIL-A-82690 Base Document:1980 | Arming-Firing Device, Rocket Motor, Mark 28 Mod 0 |
| MIL-A-82834 Base Document:1986 | Adhesive, Paste, One Part (No S/S Document) |
| MIL-A-82802 Base Document:1989 | Adhesive and Sealant (No S/S Document) |
| ASTM F 1973 : 2013 : EDT 1 | Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
| MIL-A-82950 Base Document:1995 | Actuator, Bellows ATU-117/P |
| A-A-59155 Base Document:2003 | Nitrogen, High Purity, Special Purpose |
| ASTM F 905 : 2004 | Standard Practice for Qualification of Polyethylene Saddle-Fused Joints |
| ASTM F 2145 : 2013 : R2018 | Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing |
| MIL-A-82821 Base Document:1989 | Aluminum, Spherical (60-Micrometers) (No S/S Document) |
| ASTM D 4079 : 2000 : R2006 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| ASTM F 1802 : 2015 : REDLINE | Standard Test Method for Performance Testing of Excess Flow Valves |
| NACE SP 01 06 : 2006 | CONTROL OF INTERNAL CORROSION IN STEEL PIPELINES AND PIPING SYSTEMS |
| NACE 10B189 : 2014 | DIRECT CURRENT OPERATED RAIL TRANSIT STRAY CURRENT MITIGATION |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM F 2349 : 2004 : R2010 | Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems (Withdrawn 2017) |
| ASTM F 905 : 2004 : R2018 | Standard Practice for Qualification of Polyethylene Saddle-Fused Joints |
| ASTM D 5395 : 2003 | Standard Specification for Reclaimed Methylene Chloride |
| ASTM D 7509 : 2009 | Standard Specification for Fluorocarbon Feedstock Grade Chloroform |
| ASTM E 1229 : 2016 : REDLINE | Standard Specification for Calcium Hypochlorite |
| ASTM F 1588 : 1996 : R2011 | Standard Test Method for Constant Tensile Load Joint Test (CTLJT) |
| ASTM F 1973 : 2013 | Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
| ASCE 7 02 : 2003 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| API RP 1175 : 2015 | PIPELINE LEAK DETECTION - PROGRAM MANAGEMENT |
| MIL-B-48387 Base Document:1975 | Ball Powder, Igniter (BPI) (Spheroidal Propellant Igniter (SPI)) (No S/S Document) |
| MIL-A-82667 Revision A:1978 | Ammonium Perchlorate, General Specification for |
| ASTM D 4080 : 2015 : REDLINE | Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade |
| API RP 1133 : 2017 | MANAGING HYDROTECHNICAL HAZARDS FOR PIPELINES LOCATED ONSHORE OR WITHIN COASTAL ZONE AREAS |
| ASTM D 4079 : 2000 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM F 1588 : 1996 : R2002 | Standard Test Method for Constant Tensile Load Joint Test (CTLJT) |
| MIL-A-46091 Revision B:1981 | Adhesive, Brake Lining to Metal (No S/S Document) |
| NFPA 513 : 1998 | MOTOR FREIGHT TERMINALS |
| MIL-DTL-70759 Revision A:2004 | Container, Ammunition: Hand-Held Pyrotechnic Signal Series, ScopePA142A1 |
| API 67 RUSSIAN : 2007 | RECOMMENDED PRACTICE FOR OILFIELD EXPLOSIVES SAFETY |
| API 1115:1994 | RECOMMENDED PRACTICE ON THE OPERATION OF SOLUTION-MINED UNDERGROUND STORAGE FACILITIES |
| MIL-A-70827 Revision A:1994 | Actuator, Piston, PA535 Parts for and Loading, Assembling, and Packing |
| API 1117:2008 | RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES |
| MIL-A-82801 Base Document:1989 | Aluminum, Spherical (13-Micrometers) (No S/S Document) |
| API 1102 : 2007 INC ERR 4:2014 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
| NACE SP 02 86 : 2007 | ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES |
| API RP 1175 & COMPANION GUIDE BUNDLE : 1ED 2017 | RECOMMENDED PRACTICE FOR PIPELINE LEAK DETECTION - PROGRAM MANAGEMENT, AND COMPANION GUIDE BUNDLE |
| AGA XQ0701 : 0 | AGA REPORT NO. 9, MEASUREMENT OF GAS BY MULTIPATH ULTRASONIC METERS |
| ISO 19904-1:2006 | Petroleum and natural gas industries — Floating offshore structures — Part 1: Monohulls, semi-submersibles and spars |
| ASTM D 4079 : 2000 : R2016 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
| ASTM F 1924 : 2012 : REDLINE | Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| ASTM F 2349 : 2004 | Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems |
| API 500 RUSSIAN :1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 500 RUSSIAN : 1997 : R2002 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| ASTM D 4701 : 2000 : R2015 | Standard Specification for Technical Grade Methylene Chloride |
| API 1115 : 1994 : R2007 | RECOMMENDED PRACTICE ON THE OPERATION OF SOLUTION-MINED UNDERGROUND STORAGE FACILITIES |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| API RP 1130 : 2007(R2012) | COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS |
| A-A-58020 Revision A:1994 | Drums, Shipping, Steel with Polyethylene Insert |
| MIL-A-82843 Base Document:1990 | Adhesive, Elevated Temperature Curing (No S/S Document) |
| NACE RP 03 91 : 0 | MATERIALS FOR THE HANDLING AND STORAGE OF CONCENTRATED (90 TO 100%) SULFURIC ACID AT AMBIENT TEMPERATURES |
| FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
| API RP 2201 : 2003 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| MIL-A-82667-1 Base Document:1977 | Ammonium Perchlorate, High Purity |
| API 15LE : 2008 : R2013 | SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
| ASTM F 905 : 2004 : R2011 | Standard Practice for Qualification of Polyethylene Saddle-Fused Joints |
| MIL-A-82836 Base Document:1987 | Adhesive, Epoxy Resin, Structural Bonding, Non-Asbestos (No S/S Document) |
| MIL-PRF-82736 Revision A:1988 | Ignition Pellets, Magnesium-Fluorocarbon |
| MIL-L-16355 Revision E:1993 | Lead Styphnate, Basic |
| API 1102 : 2007 INC ERR 3:2012 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
| ASTM F 2619/F2619M : 2013 : REDLINE | Standard Specification for High-Density Polyethylene (PE) Line Pipe |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| ASTM F 2145 : 2013 | Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing |
| ASTM D 5395 : 2003 : R2008 | Standard Specification for Reclaimed Methylene Chloride <a href="#fn00002"></a> |
| ASTM D 7509 : 2009 : R2015 | Standard Specification for Fluorocarbon Feedstock Grade Chloroform |
| ASTM D 4701 : 2000 : R2011 | Standard Specification for Technical Grade Methylene Chloride |
| ASTM D 4126 : 2002 : R2007 | Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane |
| ASTM F 1588 : 1996 | Standard Test Method for Constant Tensile Load Joint Test (CTLJT) |
| ASTM F 1733 : 2013 : REDLINE | Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA SSTD 8070 0126 : 2014 | TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE |
| NASA KSC SPEC P 0018 : 1995 | PROPELLANTS, RECOVERED NITROGEN TETROXIDE SOLUTION, SPECIFICATION FOR |
| NASA KSC SPEC P 0017 : 1994 | PROPELLANTS, RECOVERED HYDRAZINE FAMILY FUELS, SPECIFICATION FOR |
| ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
| ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| ASTM E 1281 : 2015 : REDLINE | Standard Guide for Nuclear Facility Decommissioning Plans |
| API 6H : 1998 : R2011 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
| ASTM F 2350 : 2004 : R2010 | Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems (Withdrawn 2017) |
| NASA SSTD 8070 0092 : 2013 | DESIGN, INSTALLATION AND MAINTENANCE OF SITEWIDE NATURAL GAS DISTRIBUTION SYSTEM |
| ASTM F 2509 : 2015-12 | SPECIFICATION FOR FIELD-ASSEMBLED ANODELESS RISER KITS FOR USE ON OUTSIDE DIAMETER CONTROLLED POLYETHYLENE GAS DISTRIBUTION PIPE AND TUBING |
| MIL-A-52628 Revision B:1977 | Anchor, Propellant Embedded (No S/S Document) |
| API 1130 : 2007 | COMPUTATIONAL PIPELINE MONITORING FOR LIQUIDS |
| ASTM F 2207 : 2006 | Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
| MIL-P-87931 Base Document:1977 | Propellant, Isopropyl Alcohol |
| API 15LE : 2008(R2018) | SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
| FAA AC 109-1 : 0 | AVIATION SECURITY - ACCEPTANCE AND HANDLING PROCEDURES - INDIRECT AIR CARRIER SECURITY |
| MIL-DTL-248 Revision D:2002 | Trinitrotoluene (TNT) |
| ASTM D 4701 : 2000 : R2006 | Standard Specification for Technical Grade Methylene Chloride |
| MIL-PRF-18487 Revision A:1972 | Compound, Gun Slushing |
| API RP 67 : 2007 | RECOMMENDED PRACTICE FOR OILFIELD EXPLOSIVES SAFETY |
| API 67 : 2007 : R2015 | RECOMMENDED PRACTICE FOR OILFIELD EXPLOSIVES SAFETY |
| MIL-PRF-32293 Base Document:2008 | Cap, Blasting, Electric - M6 |
| API 2220 : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| ASTM D 4126 : 2002 : R2012 | Standard Specification for Vapor-Degreasing Grade and General Solvent Grade<brk> 1,1,1-Trichloroethane (Withdrawn 2017) |
| API 15LE CHINESE : 2008 | SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE) |
| API 1102 : 2007 INC ERR 5:2014 (R2015) | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
| API 1102 : 2007 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| ASTM E 1120 : 2016 : REDLINE | Standard Specification for Liquid Chlorine |
| MSS SP 115 : 2017 | EXCESS FLOW VALVES, NPS 1[1/4] AND SMALLER, FOR FUEL GAS SERVICE |
| ASTM D 8135 : 2017 | Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests |
| ASTM F 1588 : 1996 : R2015 | Standard Test Method for Constant Tensile Load Joint Test (CTLJT) |
| ASTM F 1973 : 2013 : R2018 | Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
| EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
| MIL-DTL-211 Revision F:2000 | Phosphorus, Red, Technical |
| MIL-A-82785 Base Document:1986 | Adhesive, Two Part, High Strength (No S/S Document) |
| API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
| ASTM D 4701:2000 | Standard Specification for Technical Grade Methylene Chloride |
| MIL-A-50460 Revision A:1973 | Ammonium Nitrate, Prilled (for use in Ammunition) |
| MIL C 82656 : 1977 | CARBON BLACK |
| MIL-P-82887 Base Document:1993 | Propellant, M6+2 For The 76MM/62 Caliber Cartridge |
| API 1102 : 2007 INC ERR 5:2014 | STEEL PIPELINES CROSSING RAILROADS AND HIGHWAYS |
| MIL-A-50926 Revision A:1975 | Adhesive MR-23 (for use in Ammunition) |
| API 2220 CHINESE : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| MIL-DTL-70507 Revision A:2010 | Projectile, 155MM, HE - XM864E2 Loading, Assembling and Packing |
| MIL-A-82842 Base Document:1983 | Adhesive, Conductive, Low Resistivity (No S/S Document) |
| BB-F-1421 Revision B:1982 | Fluorocarbon Refrigerants (S/S by A-A-58060) |
| ASTM D 4919 : 2017 | Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings |
| MIL-A-82830 Base Document:1990 | Ammonium Perchlorate, Conditioned (with Reduced Alkali Metal Content) (No S/S Document) |
| API 6H : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| NFPA 56 (PS) : 2012 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ASTM D 6273 : 2014 : REDLINE | Standard Test Methods for Natural Gas Odor Intensity |
| API 2201 : 2003 : R2010 | SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 6H CHINESE : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
| ASTM D 5395 : 2003 : R2013 | Standard Specification for Reclaimed Methylene Chloride |
| FAA AC 121-27 : 0 | GUIDE FOR AIR CARRIERS, FREIGHT FORWARDERS, AND SHIPPERS IN OBTAINING INFORMATION DEALING WITH THE TRANSPORTATION OF HAZARDOUS MATERIALS BY AIR |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| ASTM F 2350 : 2004 | Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems |
| ASTM F 1588 : 1996 : R2007 | Standard Test Method for Constant Tensile Load Joint Test (CTLJT) |
| PIP STC01015 : 2017 | STRUCTURAL DESIGN CRITERIA |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.