ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method
|
EN 13687-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact
|
EN ISO 3001 : 1999
|
PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT
|
ISO 813:2016
|
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
|
DIN ISO 8130-2 E : 2005
|
COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD)
|
EN 228:2012+A1:2017
|
Automotive fuels - Unleaded petrol - Requirements and test methods
|
EN ISO 2431:2011
|
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
|
EN 14879-1:2005
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
|
ISO 3219:1993
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
|
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
|
ISO 3001:1999
|
Plastics Epoxy compounds Determination of epoxy equivalent
|
ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
|
EN ISO 2360:2017
|
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
|
ISO 2808:2007
|
Paints and varnishes Determination of film thickness
|
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
|
EN ISO 4625-1:2006
|
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004)
|
ISO 8130-2:1992
|
Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method)
|
DIN 53393:1976-03
|
TESTING OF TEXTILE GLASS-REINFORCED PLASTICS; BEHAVIOUR TO THE EFFECT OF CHEMICALS
|
EN ISO 2811-2:2011
|
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
|
EN 977:1997
|
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
|
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013)
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
EN ISO 2064 : 2000
|
METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS
|
ISO 3882:2003
|
Metallic and other inorganic coatings — Review of methods of measurement of thickness
|
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
|
ISO 4625-1:2004
|
Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method
|
EN ISO 2811-1:2016
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
|
EN ISO 3882:2003
|
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
|
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials
|
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion
|
ISO 12944-1:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
|
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
|
ISO 2811-2:2011
|
Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
|
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
|
EN ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
|
EN ISO 3219:1994
|
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
|
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing
|
EN ISO 4624:2016
|
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
|
ISO 2815:2003
|
Paints and varnishes Buchholz indentation test
|
ISO 12944-4:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
|
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
|
ISO 2559:2011
|
Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications
|
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
|
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
|
ISO 3251:2008
|
Paints, varnishes and plastics Determination of non-volatile-matter content
|
ISO 554:1976
|
Standard atmospheres for conditioning and/or testing — Specifications
|
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test
|
EN 1081:1998
|
Resilient floor coverings - Determination of the electrical resistance
|
ISO 527-3:1995
|
Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
EN ISO 527-3:1995/AC:2002
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
|
ISO 2064:1996
|
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
|
ISO 1629:2013
|
Rubber and latices — Nomenclature
|
DIN ISO 8130-2:2005-04
|
COATING POWDERS - PART 2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD)
|
EN ISO 2808:2007
|
Paints and varnishes - Determination of film thickness (ISO 2808:2007)
|
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
|
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
EN ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016)
|
ISO 2431:2011
|
Paints and varnishes Determination of flow time by use of flow cups
|