|
ISO 4892-1:2016
|
Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
|
EN 673:2011
|
Glass in building - Determination of thermal transmittance (U value) - Calculation method |
|
EN ISO 10140-5:2010/A1:2014
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010) |
|
EN ISO 11664-2:2011
|
Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
|
ISO 10140-2:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
|
EN 410:2011
|
Glass in building - Determination of luminous and solar characteristics of glazing |
|
EN ISO 4892-1:2016
|
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
|
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
|
ISO 6603-1:2000
|
Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing |
|
EN ISO 10140-4:2010
|
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010) |
|
ISO 10140-1:2016
|
Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
|
EN 14500:2008
|
Blinds and shutters - Thermal and visual comfort - Test and calculation methods |
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
|
EN 13501-5:2016
|
Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
|
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
|
EN ISO 11664-1:2011
|
Colorimetry - Part 1: CIE standard colorimetric observers (ISO 11664-1:2007) |
|
EN ISO 10140-1:2016
|
ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016) |
|
EN 13501-2:2016
|
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
|
ISO 10077-2:2017
|
Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames |
|
ISO 10140-4:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
|
EN ISO 10077-2:2017
|
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017) |
|
EN ISO 6946:2017
|
Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
|
ISO 12572:2016
|
Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
|
EN ISO 6603-1 : 2000
|
PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING |
|
ISO 11664-1:2007
|
Colorimetry Part 1: CIE standard colorimetric observers |
|
EN ISO 12572:2016
|
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
|
ISO 472:2013
|
Plastics Vocabulary |
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
|
EN 674:2011
|
Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method |
|
ISO 899-2:2003
|
Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading |
|
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
|
EN ISO 10140-2:2010
|
Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
|
ISO 9001:2015
|
Quality management systems — Requirements |
|
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
|
ISO 717-1:2013
|
Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
|
EN 1995-1-1:2004/A2:2014
|
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
|
ISO 11664-2:2007
|
Colorimetry — Part 2: CIE standard illuminants |
|
ISO 10140-5:2010
|
Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
|
ISO 6946:2017
|
Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
|
EN ISO 899-2:2003/A1:2015
|
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015) |
|
EN 1990:2002/A1:2005/AC:2010
|
EUROCODE - BASIS OF STRUCTURAL DESIGN |
|
EN 1873:2014+A1:2016
|
Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
|
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
|
EN 14963:2006
|
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
|
ISO 178:2010
|
Plastics Determination of flexural properties |
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
|
EN ISO 4892-2:2013
|
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
|
EN ISO 472:2013
|
Plastics - Vocabulary (ISO 472:2013) |