• DIN EN 1870-4:2012-06

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING

    Available format(s):  Hardcopy, PDF

    Superseded date:  07-03-2021

    Language(s):  English, German

    Published date:  01-06-2012

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    Einleitung
    1 Anwendungsbereich
    2 Normative Verweisungen
    3 Begriffe
    4 Liste der signifikanten Gefährdungen
    5 Sicherheitsanforderungen und/oder Massnahmen
    6 Benutzerinformation
    Anhang A (normativ) Masstoleranzen von Sägewellen
    Anhang ZA (informativ) Zusammenhang zwischen dieser
              Europäischen Norm und den grundlegenden
              Anforderungen der EG-Richtlinie 98/37/EG
    Anhang ZB (informativ) Zusammenhang zwischen dieser
              Europäischen Norm und den grundlegenden
              Anforderungen der EG-Richtlinie 2006/42/EG

    Abstract - (Show below) - (Hide below)

    Provides all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary multi-blade rip sawing machines, hereinafter referred to as 'machines', designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

    General Product Information - (Show below) - (Hide below)

    Committee TC 142
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Superseded
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
    DIN VDE 0282-1 : 2003 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 1: GENERAL REQUIREMENTS
    ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    EN ISO 2286-2:2016 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ROLL CHARACTERISTICS - PART 2: METHODS FOR DETERMINATION OF TOTAL MASS PER UNIT AREA, MASS PER UNIT AREA OF COATING AND MASS PER UNIT AREA OF SUBSTRATE (ISO 2286-2:2016)
    ISO 7211-2:1984 Textiles Woven fabrics Construction Methods of analysis Part 2: Determination of number of threads per unit length
    EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    EN ISO 1421:2016 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK (ISO 1421:2016)
    EN 894-3:2000+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
    ISO 4871:1996 Acoustics Declaration and verification of noise emission values of machinery and equipment
    EN 1037:1995+A1:2008 SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
    ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
    EN 61800-5-2:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL (IEC 61800-5-2:2016)
    EN ISO 14163 : 1998 ACOUSTICS - GUIDELINES FOR NOISE CONTROL BY SILENCERS
    EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
    EN 61508-1:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
    EN 1088:1995+A2:2008 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    EN ISO 3743-2 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    EN 894-2:1997+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
    ISO 3743-2:1994 Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
    IEC 60947-4-1:2009+AMD1:2012 CSV LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
    EN 61508-7:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
    ISO 7960:1995 Airborne noise emitted by machine tools Operating conditions for woodworking machines
    EN ISO 2060 : 1995 TEXTILES - YARN FROM PACKAGES - DETERMINATION OF LINEAR DENSITY (MASS PER UNIT LENGTH) BY THE SKEIN METHOD
    EN 1093-9:1998+A1:2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
    ISO 9614-1:1993 Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points
    ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
    EN 614-2:2000+A1:2008 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
    ISO 4649:2017 Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum device
    EN 50370-2 : 2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY
    EN 1837:1999+A1:2009 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    EN ISO 13850:2015 SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
    EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
    EN 1005-2:2003+A1:2008 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
    IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
    EN ISO 3745:2012/A1:2017 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017)
    EN 614-1:2006+A1:2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
    EN ISO 13857 : 2008 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
    EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
    ISO 12100:2010 Safety of machinery General principles for design Risk assessment and risk reduction
    2006/42/EC : 2006 AMD 4 2014 DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 MAY 2006 ON MACHINERY, AND AMENDING DIRECTIVE 95/16/EC (RECAST) (TEXT WITH EEA RELEVANCE)
    EN 50178 : 1997 ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS
    HD 22-1 : 200S4 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOSETTING INSULATION - GENERAL REQUIREMENTS
    HD 21.1 : 200S4 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - GENERAL REQUIREMENTS
    ISO 2286-2:2016 Rubber- or plastics-coated fabrics Determination of roll characteristics Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
    EN 61508-2:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS
    ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
    EN ISO 3746:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE (ISO 3746:2010)
    EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
    EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN ISO 3744:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
    EN ISO 4414 : 2010 PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS (ISO 4414:2010)
    ISO 2060:1994 Textiles Yarn from packages Determination of linear density (mass per unit length) by the skein method
    IEC 60439-1:1999+AMD1:2004 CSV LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
    ISO 13849-2:2012 Safety of machinery Safety-related parts of control systems Part 2: Validation
    ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
    IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
    EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
    EN ISO 12100:2010 (edition 2) Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
    ISO 14163:1998 Acoustics Guidelines for noise control by silencers
    ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
    EN 847-1:2017 TOOLS FOR WOODWORKING - SAFETY REQUIREMENTS - PART 1: MILLING TOOLS, CIRCULAR SAW BLADES
    EN ISO 13849-2:2012 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
    EN ISO 3743-1:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
    EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
    ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
    ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
    EN 1049-2 : 1993 Textiles - Woven fabrics - Construction - Methods of analysis - Part 2: Determination of number of threads per unit length (ISO 7211-2:1984 modified)
    ISO 1421:2016 Rubber- or plastics-coated fabrics Determination of tensile strength and elongation at break
    EN ISO 4871 : 2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT (ISO 4871:1996)
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    EN 1760-2:2001+A1:2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
    EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
    IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 3745:2012 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for anechoic rooms and hemi-anechoic rooms
    EN ISO 4413 : 2010 HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
    EN 50370-1 : 2005 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
    IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
    EN ISO 11688-1 : 2009 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING (ISO/TR 11688-1:1995)
    ISO 13849-1:2015 Safety of machinery Safety-related parts of control systems Part 1: General principles for design
    ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
    EN 61310-1:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
    EN ISO 9614-1 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 1: MEASUREMENT AT DISCRETE POINTS
    EN ISO 11202:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
    IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)
    ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    EN 1093-11:2001+A1:2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 11: DECONTAMINATION INDEX
    IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
    ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    DIN VDE 0281-1 : 2003 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - PART 1: GENERAL REQUIREMENTS
    EN 894-1:1997+A1:2008 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective