• Shopping Cart
    There are no items in your cart

DIN EN 61268 : 1996

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)

Superseded date

01-11-2003

Superseded by

DIN EN 62053-23 : 2017

Published date

12-01-2013

Sorry this product is not available in your region.

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
  3.1 Allgemeine Begriffe
  3.2 Begriffe für die Funktionselemente
  3.3 Begriffe für mechanische Funktionselemente
  3.4 Begriffe der Isolation
  3.5 Begriffe der Zähler-Nenngrössen
  3.6 Begriffe der Einflussgrössen
  3.7 Begriffe der Prüfungen
4 Anforderungen
  4.1 Genormte elektrische Werte
  4.2 Mechanische Anforderungen
  4.3 Klimatische Bedingungen
  4.4 Elektrische Anforderungen
  4.5 Elektromagnetische Verträglichkeit (EMV)
  4.6 Anforderungen an die Genauigkeit
5 Prüfungen und Prüfbedingungen
  5.1 Allgemeine Prüfbedingungen
  5.2 Prüfung der mechanischen Anforderungen
  5.3 Prüfung von klimatischen Umgebungseinflüssen
  5.4 Prüfung der elektrischen Anforderungen
  5.5 Prüfung der elektromagnetischen
      Verträglichkeit (EMV)
  5.6 Prüfungen auf Einhalten der
      Genauigkeitsanforderungen
Anhang A (normativ) Beziehung zwischen der
         Umgebungslufttemperatur und relativer
         Luftfeuchte
Anhang B (normativ) Prüfschaltung für den
         Gleichstrom-Einfluss
Anhang C (normativ) Wellenform der Spannung für die
         Prüfungen der Wirkung von Einbrüchen und
         Unterbrechungen der Spannung
Anhang D (normativ) Elektromagnet für die Prüfung der
         Beeinflussung durch äussere Magnetfelder
Anhang E (informativ) Geometrische Darstellung von
         Wirk- und Blindleistung
Anhang F (informativ) Prüfplan
Anhang ZA (normativ) Normative Verweisungen auf
          internationale Publikationen mit ihren
          entsprechenden europäischen Publikationen
Anhang ZB (normativ) Besondere nationale Bedingungen

Refers only to newly manufactured static var-hour meters of accuracy classes 2 and 3 for measuring alternating current electrical reactive energy in frequency range 45Hz and 65Hz, for type testing only.

DocumentType
Standard
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

Standards Relationship
UNE-EN 61268:1996 Identical
NBN EN 61268 : 1996 Identical
SN EN 61268 : 1996 Identical
I.S. EN 61268:1999 Identical
NF EN 61268 : 1996 Identical
EN 61268:1996 Identical
BS EN 61268:1996 Identical
VDE 0418-20 : 1996 Corresponds
IEC 61268:1995 Identical
VDE 0418-20 : 1996 Identical

VDE 0418-3-31 : 1999 ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY)
DIN EN 62053-31 : 1999 ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY)

DIN EN 61036 : 2001 ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
IEC 60038:2009 IEC standard voltages
DIN EN 60068-2-2 : 1995 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
IEC 60068-2-5:2010 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
DIN IEC 60038 : 2002 IEC STANDARD VOLTAGES
IEC 60695-2-1:1991 Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance
DIN IEC 60068-2-30:1986-09 ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE)
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC TR 60736:1982 Testing equipment for electrical energy meters
IEC 60145:1963 Var-hour (reactive energy) meters
DIN VDE 0470-1 : 1992
DIN IEC 60068-2-5:1982-11 BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL
DIN IEC 60359:1993-09 EXPRESSION OF THE PERFORMANCE OF ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT
IEC 60801-4:1988 Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements
IEC 60068-2-11:1981 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
DIN IEC 60068-2-11:1982-08 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST KA: SALT MIST
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
ISO 75-2:2013 Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
IEC 60817:1984 Spring-operated impact-test apparatus and its calibration
DIN EN 60068-2-1 : 1995 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
DIN EN 60068-2-27 : 1995 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
DIN IEC 60085 : 1993 THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
IEC 60375:2003 Conventions concerning electric and magnetic circuits
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
DIN VDE 0636-10 : 1992 LOW-VOLTAGES FUSES; GENERAL REQUIREMENTS
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
DIN EN 55022 : 2011 COR 1 2016 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008, MODIFIED)
IEC 60801-3:1984 Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
IEC 60359:2001 Electrical and electronic measurement equipment - Expression of performance
IEC 60186:1987 Voltage transformers
DIN EN 60514 : 1995 ACCEPTANCE INSPECTION OF CLASS 2 ALTERNATING-CURRENT WATT-HOUR METERS
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
DIN EN 61000-4-2 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
DIN IEC 60060-1 : 1994 HIGH VOLTAGE TEST TECHNIQUES - GENERAL SPECIFICATIONS AND TEST REQUIREMENTS
IEC 60387:1992 Symbols for alternating-current electricity meters
DIN EN ISO 75-2:2013-08 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013)
DIN EN 60387:1993-11 SYMBOLS FOR ALTERNATING-CURRENT ELECTRICITY METERS
IEC 61036:1996+AMD1:2000 CSV Alternating current static watt-hour meters for active energy (classes 1 and 2)
IEC 60801-2:1991 Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.