DIN EN ISO 18265:2014-02
Current
The latest, up-to-date edition.
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
Hardcopy , PDF
German, English
01-02-2014
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Principles of conversion
3 Application of conversion tables
Annex A (informative) - Conversion table for unalloyed, low
alloy steels and cast steel
Annex B (informative) - Conversion tables for steels for
quenching and tempering
Annex C (informative) - Conversion tables for steels for
cold working
Annex D (informative) - Conversion tables for high speed steels
Annex E (informative) - Conversion tables for hardmetals
Annex F (informative) - Conversion tables for non-ferrous
metals and alloys
Annex G (informative) - Conversion tables for tool steels
Annex H (informative) - Remarks on the effect of the changed
test conditions
Bibliography
This standard is included in DIN HDBK 218, 14, 262 and 46.
| DevelopmentNote |
Supersedes DIN 50150 (02/2004)
|
| DocumentType |
Standard
|
| Pages |
90
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 18265 : 2013 | Identical |
| NEN EN ISO 18265 : 2013 | Identical |
| EN ISO 18265:2013 | Identical |
| BS EN ISO 18265:2013 | Identical |
| I.S. EN ISO 18265:2013 | Identical |
| NF EN ISO 18265 : 2013 | Identical |
| NS EN ISO 18265 : 2013 | Identical |
| ISO 18265:2013 | Identical |
| UNE-EN ISO 18265:2014 | Identical |
| BS EN ISO 16859-1:2015 | Metallic materials. Leeb hardness test Test method |
| DIN HDBK 218 : 6ED 2014 | |
| DIN EN ISO 19715:2016-03 (Draft) | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| DIN 6799:2017-06 | RETAINING WASHERS FOR SHAFTS |
| DIN ISO 29262:2013-03 | Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011) |
| DIN 743-3:2012-12 | Calculation of load capacity of shafts and axles - Part 3: Strength of materials |
| DIN EN ISO 16859-1:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
| DIN HDBK 262 : 5ED 2014 | |
| DIN EN ISO 14713-3:2010-05 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 3: SHERARDIZING (ISO 14713-3:2017) |
| I.S. EN ISO 16859-1:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
| 13/30263150 DC : 0 | BS EN ISO 16859-1 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD |
| DIN HDBK 46 : 10ED 2016 | |
| DIN HDBK 14 : 12ED 2016 | |
| ISO 16859-1:2015 | Metallic materials — Leeb hardness test — Part 1: Test method |
| EN ISO 16859-1:2015 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| UNE-EN ISO 16859-1:2016 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
| ISO 6507-1:2005 | Metallic materials — Vickers hardness test — Part 1: Test method |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6507-2:2005 | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| ISO 4957:1999 | Tool steels |
| DIN EN ISO 7500-1:2016-05 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| ISO 4964:1984 | Steel — Hardness conversions |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
| ISO 7500-1:2015 | Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
| ISO/TR 10108:1989 | Steel — Conversion of hardness values to tensile strength values |
| DIN 17200:1987-03 | STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 4957:2001-02 | TOOL STEELS |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.