IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method |
ISO 6603-2:2000
|
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
ISO 2535:2001
|
Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature |
EN ISO 62:2008
|
Plastics - Determination of water absorption (ISO 62:2008) |
ISO 2114:2000
|
Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value |
ISO 3521:1997
|
Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage |
EN ISO 8256:2004
|
Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
ISO 3167:2014
|
Plastics Multipurpose test specimens |
EN ISO 2114:2000/AC:2005
|
PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE |
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
ISO 3219:1993
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
ISO 14848:1998
|
Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C |
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
ISO 6271:2015
|
Clear liquids Estimation of colour by the platinum-cobalt colour scale |
ISO 10350-1:2017
|
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength |
EN ISO 1675:1998
|
Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985) |
EN ISO 604 : 2003
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002) |
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
ISO 3672-1:2000
|
Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system |
EN ISO 2818:1996
|
PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING |
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN ISO 179-1:2010
|
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-2:2013
|
Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
ISO 1523:2002
|
Determination of flash point — Closed cup equilibrium method |
EN ISO 75-2:2013
|
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
ISO 4615:1979
|
Plastics Unsaturated polyesters and epoxide resins Determination of total chlorine content |
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
EN ISO 3167:2014
|
Plastics - Multipurpose test specimens (ISO 3167:2014) |
EN ISO 3521 : 1999
|
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997) |
ISO 4630:2015
|
Clear liquids Estimation of colour by the Gardner colour scale |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 2554:1997
|
Plastics — Unsaturated polyester resins — Determination of hydroxyl value |
ISO 2577:2007
|
Plastics Thermosetting moulding materials Determination of shrinkage |
ISO 1675:1985
|
Plastics — Liquid resins — Determination of density by the pyknometer method |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
EN ISO 3219:1994
|
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
EN ISO 6603-2:2000
|
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
ISO 604:2002
|
Plastics — Determination of compressive properties |
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
EN ISO 4589-2:2017
|
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
ISO 62:2008
|
Plastics Determination of water absorption |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
EN ISO 2554 : 1999
|
PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYSROXYL VALUE |
EN 22719 : 1993
|
PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 2818:1994
|
Plastics — Preparation of test specimens by machining |
ISO 4901:2011
|
Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
ISO 760:1978
|
Determination of water Karl Fischer method (General method) |
EN ISO 4615 : 1999
|
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979) |
ISO 178:2010
|
Plastics Determination of flexural properties |
EN ISO 2535 : 2002
|
PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001) |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |