EN 12493:2013+A1:2014/AC:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
12-06-2019
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Pressure vessel design
6 Openings
7 Non-pressure retaining parts
8 Workmanship and construction
9 Construction and workmanship of internal pipework
10 Manufacturing tests and examinations
11 External corrosion protection and finishing
12 Marking
13 Records and documentation
Annex A (normative) - Guidance on selection of material
grades
Annex B (normative) - Reference temperatures for design
Annex C (informative) - Alternative reference temperatures
for design
Annex D (normative) - Design
Annex E (informative) - Example of joints
Annex F (normative) - Allowable tolerances
Annex G (normative) - Heat treatment
Annex H (informative) - Typical method for measurement
of shell peaking
Annex I (normative) - Welding imperfections and test
specimens
Annex J (informative) - Choice of non-destructive test
methods for welds
Annex K (normative) - Hydraulic pressure test
Annex L (informative) - Environmental checklist
Bibliography
Describes minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker pressure vessels and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.
Committee |
TC 286
|
DevelopmentNote |
Supersedes PREN 12493. (11/2013) 2013 Edition Re-Issued in July 2014 & incorporates AMD 1 2014. (08/2014)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
I.S. EN 12493:2013+A1:2014/AC:2015 | Identical |
NS EN 12493 : 2013 AC 2015 | Identical |
SN EN 12493 : 2014 CORR 2015 | Identical |
NEN EN 12493 : 2013 C1 2015 | Identical |
NF EN 12493 : 2014 + A1 2014 | Identical |
BS EN 12493 : 2013 | Identical |
PN EN 12493 : 2014 AC 2015 | Identical |
DIN EN 12493:2018-08 | Identical |
ONORM EN 12493 : 2015 | Identical |
UNI EN 12493:2018 | Identical |
SS EN 12493:2013:A2 2018 | Identical |
UNI EN 12493 : 2014 | Identical |
DIN EN 12493:2014-03 | Identical |
I.S. EN 12493:2013 | Identical |
NF EN 12493+A2 : 2018 | Identical |
ÖNORM EN 12493: 2018 | Identical |
UNE-EN 12493:2014 | Identical |
NBN EN 12493 : 2014 COR 2015 | Identical |
DIN EN 12493:2017-01 | Identical |
11/30248687 DC : 0 | BS EN 13776 - LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS |
10/30216074 DC : 0 | BS EN 14334 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
11/30253745 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
12/30250279 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
UNE-EN 14334:2015 | LPG equipment and accessories - Inspection and testing of LPG road tankers |
PREN 13776 : DRAFT 2011 | LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS |
17/30347665 DC : 0 | BS ISO 21843 - DETERMINATION OF THE RESISTANCE TO HYDROCARBON POOL FIRES OF FIRE PROTECTION MATERIALS AND SYSTEMS FOR PRESSURE VESSELS |
DIN EN 12252:2014-07 | LPG equipment and accessories - Equipping of LPG road tankers |
DIN EN 14334:2015-01 | LPG equipment and accessories - Inspection and testing of LPG road tankers |
BS EN 12252:2014 | LPG equipment and accessories. Equipping of LPG road tankers |
DIN EN 12252:2000-10 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN 12252:2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN 13776:2013 | LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS |
I.S. EN 14334:2014 | LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
DIN EN 13776:2013-08 | LPG equipment and accessories - Filling and discharge procedures for LPG road tankers |
UNI EN 14334 : 2014 | LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
UNI EN 13776 : 2013 | LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS |
UNI EN 12252 : 2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
13/30281067 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
03/118134 DC : DRAFT NOV 2003 | EN 12252 - EQUIPPING OF LIQUEFIED PETROLEUM GAS (LPG) ROAD TANKERS |
17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
UNE-EN 13776:2013 | LPG equipment and accessories - Filling and discharge procedures for LPG road tankers |
EN 14334:2014 | LPG equipment and accessories - Inspection and testing of LPG road tankers |
EN 13776:2013 | LPG equipment and accessories - Filling and discharge procedures for LPG road tankers |
PREN 12252 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
14/30300118 DC : 0 | BS EN 14334 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS |
BS EN 14334:2014 | LPG equipment and accessories. Inspection and testing of LPG road tankers |
BS EN 13776:2013 | LPG equipment and accessories. Filling and discharge procedures for LPG road tankers |
EN 12252:2014 | LPG equipment and accessories - Equipping of LPG road tankers |
ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
EN 444:1994 | Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays |
EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
EN 12252:2014 | LPG equipment and accessories - Equipping of LPG road tankers |
EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
EN ISO 6520-2:2013 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013) |
EN ISO 5173:2010/A1:2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009) |
ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 9016:2012 | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012) |
EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
EN ISO 5178:2011 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001) |
EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
EN 1011-2:2001/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
EN ISO 19232-2:2013 | Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013) |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
EN ISO 17639:2013 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 9162:2013 | Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications |
EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
EN 462-1:1994 | Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value |
ISO 6520-2:2013 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure |
EN 13109:2010 | LPG equipment and accessories - LPG tanks and drums - Disposal |
ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
ISO 9016:2012 | Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination |
EN 14334:2014 | LPG equipment and accessories - Inspection and testing of LPG road tankers |
ISO 5178:2001 | Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints |
ISO 19232-2:2013 | Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators |
ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 837-2:1997 | Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges |
EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
EN 14717:2005 | Welding and allied processes - Environmental check list |
EN ISO 17638:2016 | Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
EN 286-1:1998/A2:2005 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.