EN 1264-4:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water based surface embedded heating and cooling systems - Part 4: Installation
Superseded date
26-06-2021
Superseded by
Published date
02-09-2009
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative References
3 Terms, definitions and symbols
4 Requirements
Annex A (informative) - Corrosion Prevention
Bibliography
This European Standard applies to heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled.This document specifies uniform requirements for the design and the construction of heating and cooling floor, ceiling and wall structures to ensure that the heating/cooling systems are suited to the particular application.The requirements specified by this Standard apply only to the components of the heating/cooling systems which are part of the heating/cooling system. This document excludes all other elements which are not part of the heating/cooling system.
| Committee |
CEN/TC 130
|
| DevelopmentNote |
Together with EN 1264-3, it supersedes EN 15377-2. (10/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| PN-EN 1264-4:2009/Ap1:2016 | Identical |
| I.S. EN 1264-4:2009 | Identical |
| NBN EN 1264-4 : 2010 | Identical |
| BS EN 1264-4:2009 | Identical |
| NS EN 1264-4 : 2009 | Identical |
| NEN EN 1264-4 : 2009 | Identical |
| SN EN 1264-4 : 2009 | Identical |
| NF EN 1264-4 : 2010 | Identical |
| PN EN 1264-4 : 2009 | Identical |
| UNE-EN 1264-4:2010 | Identical |
| DIN EN 1264-4:2009-11 | Identical |
| UNI EN 1264-4 : 2009 | Identical |
| ONORM EN 1264-4 : 2009 | Identical |
| DIN EN 1264-5:2009-01 | Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
| EN 1264-3:2009 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
| EN 1264-2:2008+A1:2012 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
| 05/30140625 DC : 0 | EN 15377-2 - HEATING SYSTEMS IN BUILDINGS - DESIGN OF EMBEDDED WATER BASED SURFACE HEATING AND COOLING SYSTEMS - PART 2: DESIGN, DIMENSIONING AND INSTALLATION |
| BS EN 1264-5:2008 | Water based surface embedded heating and cooling systems Heating and cooling surfaces embedded in floors, ceilings and walls. Determination of the thermal output |
| DIN EN 12828:2003-06 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| CEN/TS 14472-3:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 3: Laminate floor coverings |
| 11/30197617 DC : 0 | BS ISO 11855-5 - BUILDING ENVIRONMENT DESIGN - STANDARDS FOR THE DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION |
| I.S. EN 12828:2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| I.S. EN 1264-3:2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 3: DIMENSIONING |
| I.S. EN 1264-2:2008 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS |
| VDI 3805 Blatt 18:2013-09 | Product data exchange in the building services - Panel heating/cooling |
| UNI EN 1264-2 : 2013 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS |
| I.S. EN 1264-5:2008 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 5: HEATING AND COOLING SURFACES EMBEDDED IN FLOORS, CEILINGS AND WALLS - DETERMINATION OF THE THERMAL OUTPUT |
| S.R. CEN TS 14472-3:2003 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 3: LAMINATE FLOOR COVERINGS |
| DIN EN 12828:2014-07 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| BS EN 1264-3:2009 | Water based surface embedded heating and cooling systems Dimensioning |
| UNE-EN 1264-3:2010 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
| UNE-EN 50559:2013 | Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols |
| UNI EN 12828 : 2014 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| 12/30255708 DC : 0 | BS EN 1264-2:2008/A1 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS |
| 11/30240282 DC : DRAFT MAR 2011 | BS EN 12828 - HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| I.S. EN 50559:2013 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| BS EN 50559 : 2015 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| CEI EN 50559 : 2014 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| UNI EN 1264-3 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 3: DIMENSIONING |
| DIN EN 1264-3:2009-11 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
| DIN EN 1264-2:2013-03 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods (includes Amendment A1:2012) |
| BS EN 1264-2 : 2008 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS |
| EN 50559:2013 | Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols |
| EN 12828:2012+A1:2014 | Heating systems in buildings - Design for water-based heating systems |
| UNI EN 1264-5 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 5: HEATING AND COOLING SURFACES EMBEDDED IN FLOORS, CEILINGS AND WALLS - DETERMINATION OF THE THERMAL OUTPUT |
| EN 1264-5:2008 | Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
| NF EN 1264-3 : 2010 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 3: DIMENSIONING |
| BS EN 12828 : 2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| UNE-EN 1264-2:2009 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
| EN 1264-3:2009 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
| EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
| ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity |
| ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings |
| EN ISO 15874-5:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013) |
| EN 1264-5:2008 | Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
| ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008) |
| EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system |
| ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General |
| DIN 4724:2001-04 | PLASTIC PIPING SYSTEMS FOR WARM WATER FLOOR HEATING SYSTEMS AND RADIATOR PIPE CONNECTING - CROSSLINKED POLYETHYLENE OF MEDIUM DENSITY (PE-MDX) |
| CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) |
| ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes |
| ISO 22391-5:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system |
| ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
| EN ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017) |
| ISO 21003-5:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system |
| ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity |
| ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General |
| ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes |
| ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| ISO 15877-5:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system |
| ISO 22391-2:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes |
| EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| EN ISO/TS 15877-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003) |
| ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity |
| EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008) |
| EN ISO/TS 15876-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| ISO 17455:2005 | Plastics piping systems Multilayer pipes Determination of the oxygen permeability of the barrier pipe |
| ISO 21003-2:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 10508:2006 | Plastics piping systems for hot and cold water installations — Guidance for classification and design |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General |
| DIN 4726:2016-10 (Draft) | WARM WATER SURFACE HEATING SYSTEMS AND RADIATOR CONNECTING SYSTEMS - PLASTICS PIPING SYSTEMS AND MULTILAYER PIPING SYSTEMS |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 22391-3:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings |
| EN 1264-2:2008+A1:2012 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
| ISO/TS 21003-7:2008 | Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity |
| EN 1264-1:2011 | Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols |
| ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
| EN ISO/TS 15874-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN ISO 21003-5:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008) |
| ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings |
| ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General |
| EN ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013) |
| ISO 15874-5:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system |
| ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity |
| ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system |
| EN ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013) |
| EN ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.