EN 13986:2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
Superseded date
31-07-2020
Superseded by
Published date
27-10-2004
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics required for wood-based
panels for use in construction
5 Determination of the performance characteristics
6 Assessment and verification of constancy of
performance - AVCP
7 Marking
Annex A (normative) - Technical classes for wood-based
panels
Annex B (normative) - Formaldehyde classes
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation
Bibliography
This document defines wood-based panels for use in construction and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for wood-based panels, unfaced, overlaid, veneered or coated:· for internal use as structural components in dry conditions ) ;· for internal (or protected external) use as structural components in humid conditions ) ;· for external use as structural components ) ;· for internal use as non-structural components in dry conditions1);· for internal (or protected external) uses as non structural components in humid conditions2);· for external use as non-structural components3);· for use as structural floor decking on joists in dry1) or humid2) or exterior3) conditions; · for use as structural roof decking on joists in dry1) or humid2) or exterior3) conditions;· for use as structural wall sheathing on studs in dry1) or humid2) or exterior3) conditions. It provides for the evaluation of conformity and the requirements for marking these products.This standard covers wood-based panels in the form of solid wood panels, LVL ) , plywood, OSB, particleboards (chipboards) either resin- or cement-bonded, wet process fibreboards (hardboards, medium boards, softboards) and dry process fibreboards (MDF) for use in construction. They may contain chemical agents to improve their reaction to fire and their resistance to biological attack, e.g. by fungi and insects. This document is not intended to be applicable to wood-based panels for use in non-constructional applications.
| Committee |
CEN/TC 112
|
| DevelopmentNote |
2004 Edition Re-Issued in April 2015 & incorporates AMD 1 2015. (04/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 13986:2006 | Identical |
| UNI EN 13986 : 2005 | Identical |
| NS EN 13986 : 2002 | Identical |
| NF EN 13986 : 2005 + A1 2015 | Identical |
| DIN EN 13986:2015-06 | Identical |
| SN EN 13986 : 2004 | Identical |
| PN-EN 13986+A1:2015-06 | Identical |
| NBN EN 13986 : 2004 + A1 2015 | Identical |
| I.S. EN 13986:2004 | Identical |
| NEN EN 13986 : 2004 + A1 2015 | Identical |
| BS EN 13986 : 2004 | Identical |
| UNE-EN 13986:2006+A1:2015 | Identical |
| 04/30112438 DC : DRAFT APR 2004 | EN 622-5 - FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| I.S. EN 16351:2015 | TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| 04/30113290 DC : DRAFT MAY 2004 | EN 309 - PARTICLEBOARDS - DEFINITION AND CLASSIFICATION |
| 08/30181440 DC : DRAFT JULY 2008 | BS EN 622-4 - FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| 03/315086 DC : DRAFT SEP 2003 | EN 622-2 - FIBREBOARDS - SPECIFICATIONS - PART 2 - REQUIREMENTS FOR HARDBOARDS |
| PD CEN/TR 12872:2014 | Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs |
| 11/30253102 DC : 0 | BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| 04/30107691 DC : DRAFT JAN 2004 | EN 14221 (2ND ENQUIRY) - TIMBER AND WOOD-BASED MATERIALS IN INTERNAL WINDOWS, DOOR LEAVES AND INTERNAL DOORFRAMES - REQUIREMENTS AND SPECIFICATIONS |
| 04/30113724 DC : DRAFT MAY 2004 | EN 300 - ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| PREN 14342 : DRAFT 2011 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 622-4:2009 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| UNE-EN 622-4:2010 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| I.S. EN 14915:2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| EN 14915:2013+A1:2017 | Solid wood panelling and cladding - Characteristics, requirements and marking |
| BS EN 300:2006 | Oriented strand boards (OSB). Definitions, classification and specifications |
| BS EN 14279 : 2004 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 1995-1-1 : 2012 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| BS EN 15197:2007 | Wood-based panels. Flaxboards. Specifications |
| BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| BS EN 312:2010 | Particleboards. Specifications |
| BS EN 14964:2006 | Rigid underlays for discontinuous roofing. Definitions and characteristics |
| BS EN 789:2004 | Timber structures. Test methods. Determination of mechanical properties of wood based panels |
| DIN EN 634-2:2007-05 | CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERIOR CONDITIONS |
| EN 12369-3:2008 | Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels |
| EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
| EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| CEN/TS 15680:2007 | Prefabricated timber stairs - Mechanical test methods |
| CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics |
| EN 16755:2017 | Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications |
| NF EN 13353 : 2009 + A1 2011 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| PREN 14915 : DRAFT 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 11/30249117 DC : 0 | BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| PD CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics |
| 10/30234290 DC : 0 | BS EN 636 - PLYWOOD - SPECIFICATIONS |
| UNI EN 15644 : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| BS EN 12369-3:2008 | Wood-based panels. Characteristic values for structural design Solid-wood panels |
| 03/315085 DC : DRAFT SEP 2003 | EN 789 - TIMBER STRUCTURES - TEST METHODS - DETERMINATION OF MECHANICAL PROPERTIES OF WOOD BASED PANELS |
| BS EN 16351:2015 | Timber structures. Cross laminated timber. Requirements |
| 02/121752 DC : DRAFT APR 2002 | PREN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| 05/30132017 DC : DRAFT APR 2005 | BS EN 634-2 - CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS |
| UNE-CEN/TS 15680:2012 EX | Prefabricated timber stairs - Mechanical test methods |
| S.R. CEN/TR 12872:2014 | WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS |
| PREN 636 : DRAFT 2010 | PLYWOOD - SPECIFICATIONS |
| DIN EN 14964:2007-01 | RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 14342:2013-09 | Wood flooring - Characteristics, evaluation of conformity and marking |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| DIN EN 622-5:2010-03 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| DIN EN 1995-1-1:2010-12 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008) |
| UNE-EN 622-5:2010 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| I.S. EN 622-5:2009 | FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| I.S. EN 13353:2008 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| I.S. EN 634-2:2007 | CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS |
| I.S. EN 300:2006 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 636:2012 | PLYWOOD - SPECIFICATIONS |
| I.S. EN 309:2005 | PARTICLEBOARDS - DEFINITION AND CLASSIFICATION |
| I.S. EN 942:2007 | TIMBER IN JOINERY - GENERAL REQUIREMENTS |
| I.S. EN 789:2004 | TIMBER STRUCTURES - TEST METHODS - DETERMINATION OF MECHANICAL PROPERTIES OF WOOD BASED PANELS |
| I.S. EN 312:2010 | PARTICLEBOARDS - SPECIFICATIONS |
| I.S. EN 14342:2013 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 622-2:2004 | FIBREBOARDS - SPECIFICATIONS - REQUIREMENTS FOR HARDBOARDS |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12369-2:2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| I.S. EN 14279:2005 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 622-3:2004 | FIBREBOARDS - SPECIFICATIONS - REQUIREMENTS FOR MEDIUM BOARDS |
| I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| EN 16351:2015 | Timber structures - Cross laminated timber - Requirements |
| UNI EN 12369-2 : 2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| PREN 12369-2 : DRAFT 2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| DIN EN 12369-3:2009-02 | Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels |
| 09/30200047 DC : 0 | BS EN 12369-2 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| 07/30161334 DC : 0 | BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
| 07/30160760 DC : 0 | BS EN 13353 - SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| UNE-EN 16755:2018 | Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications |
| PREN 438-7 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| S.R. CEN/TS 16526:2013 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| NF EN 622-4 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| I.S. EN 15644:2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| DIN EN 942:2007-06 | Timber in joinery - General requirements |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 622-3:2004-07 | Fibreboards - Specifications - Part 3: Requirements for medium board |
| DIN EN 789:2005-01 | Timber structures - Test methods - Determination of mechanical properties of wood based panels; German version EN 789:2004 |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 636:2015-05 | PLYWOOD - SPECIFICATIONS |
| BS EN 634-2:2007 | Cement-bonded particleboards. Specifications Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| EN 14964:2006 | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| EN 634-2:2007 | Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| UNI EN 789 : 2005 | TIMBER STRUCTURES - TEST METHODS - DETERMINATION OF MECHANICAL PROPERTIES OF WOOD BASED PANELS |
| UNI EN 622-4 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| UNI EN 312 : 2010 | PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 622-5 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| UNI EN 14342 : 2013 | WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNI EN 1995-1-2 : 2005 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
| UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI CEN/TS 16526 : 2014 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| UNI EN 13353 : 2011 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| UNI EN 622-2 : 2005 | FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS |
| UNI EN 1995-1-1 : 2014 | EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| UNI EN 14279 : 2009 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| DIN EN 16351:2015-12 | Timber structures - Cross laminated timber - Requirements |
| I.S. EN 1995-1-1:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| 09/30202519 DC : 0 | BS EN 312 - PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 12369-3 : 2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS |
| I.S. EN 1995-1-2:2005 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
| 05/30132020 DC : DRAFT APR 2005 | BS EN 15197 - WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS |
| 16/30340580 DC : 0 | BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNE-EN 1995-1-2:2016 | Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design. |
| 14/30303797 DC : 0 | BS EN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| S.R. CEN TS 15680:2007 | PREFABRICATED TIMBER STAIRS - MECHANICAL TEST METHODS |
| I.S. EN 12369-3:2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS |
| DIN EN 622-2:2004-07 | Fibreboards - Specifications - Part 2: Requirements for hardboards |
| DIN EN 300:2006-09 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| DIN EN 622-1:2003-09 | FIBREBOARDS - SPECIFICATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 13353 : 2008 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| BS EN 622-2:2004 | Fibreboards. Specifications Requirements for hardboards |
| UNE-EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| UNE-EN 16351:2016 | Timber structures - Cross laminated timber - Requirements |
| BS EN 622-4:2009 | Fibreboards. Specifications Requirements for softboards |
| UNE-EN 13353:2009 | Solid wood panels (SWP) - Requirements |
| BS EN 14342:2013 | Wood flooring and parquet. Characteristics, evaluation of conformity and marking |
| BS EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes. Requirements and specifications |
| BS EN 1995-1-2:2004 | Eurocode 5. Design of timber structures General - Structural fire design |
| UNE-EN 1995-1-1:2016 | Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings. |
| DIN EN 15197:2007-05 | Wood-based panels - Flaxboards - Specifications |
| BS EN 622-1:2003 | Fibreboards. Specifications General requirements |
| BS EN 309:2005 | Particleboards. Definition and classification |
| UNE-EN 312:2010 | Particleboards - Specifications |
| BS EN 942:2007 | Timber in joinery. General requirements |
| BS EN 12369-2:2011 | Wood-based panels. Characteristic values for structural design Plywood |
| BS EN 622-3:2004 | Fibreboards. Specifications Requirements for medium boards |
| UNE-EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| EN 13810-1:2002 | Wood-based panels - Floating floors - Part 1: Performance specifications and requirements |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 942:2007 | Timber in joinery - General requirements |
| EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 312:2010 | Particleboards - Specifications |
| EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
| EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| EN 14220:2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| I.S. EN 16755:2017 | DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD PRODUCTS IN INTERIOR AND EXTERIOR END USE APPLICATIONS |
| 08/30181443 DC : DRAFT JULY 2008 | BS EN 622-5 - FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| 12/30266868 DC : 0 | BS EN 16481 - TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHOD |
| DIN EN 15644:2009-03 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| 07/30160738 DC : 0 | BS EN 12369-3 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 04/30048871 DC : DRAFT MAY 2004 | BS EN 14964 - ROOF COVERING PRODUCTS FOR DISCONTINUOUS LAYING AND PRODUCTS FOR WALL CLADDING - RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
| 13/30268273 DC : 0 | BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNI CEN/TS 15680 : 2008 | PREFABRICATED TIMBER STAIRS - MECHANICAL TEST METHODS |
| DD CEN/TS 15680 : DRAFT 2007 | PREFABRICATED TIMBER STAIRS - MECHANICAL TEST METHODS |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13353:2011-07 | Solid wood panels (SWP) - Requirements (includes Amendment A1:2011) |
| DIN EN 12369-2:2011-09 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| DIN EN 622-4:2010-03 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| BS EN 636 : 2012 | PLYWOOD - SPECIFICATIONS |
| BS EN 622-5:2009 | Fibreboards. Specifications Requirements for dry process boards (MDF) |
| BS EN 14915 : 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 13810-1:2002 | Wood-based panels. Floating floors Performance specifications and requirements |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN 1995-1-2:2010-12 | Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009) |
| DIN EN 14915:2013-12 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING |
| DIN EN 312:2010-12 | Particleboards - Specifications |
| DIN EN 309:2005-04 | Particleboards - Definition and classification |
| DIN EN 14220:2007-01 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
| CEN/TR 12872:2014 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
| DIN EN 14279:2009-07 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| UNE-EN 14915:2013 | Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking |
| EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 634-1:1995 | Cement-bonded particleboards - Specification - Part 1: General requirements |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 1087-1:1995 | Particleboards - Determination of moisture resistance - Part 1: Boil test |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 14755:2005 | Extruded particleboards - Specifications |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| CEN/TS 13354 : 2003 | SOLID WOOD PANELS - BONDING QUALITY - TEST METHOD |
| EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
| EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 1156:2013 | Wood-based panels - Determination of duration of load and creep factors |
| EN 312:2010 | Particleboards - Specifications |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 12114:2000 | Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| EN 325:2012 | Wood-based panels - Determination of dimensions of test pieces |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 12369-1:2001 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| ISO 9001:2015 | Quality management systems — Requirements |
| ENV 1099 : DRAFT 97 | PLYWOOD - BIOLOGICAL DURABILITY - GUIDANCE FOR THE ASSESSMENT OF PLYWOOD FOR USE IN DIFFERENT HAZARD CLASSES |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
| EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
| EN 633:1993 | Cement-bonded particleboards - Definition and classification |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 634-2:2007 | Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| CEN/TR 14823:2003 | Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method |
| EN 383:2007 | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
| EN 12775:2001 | Solid wood panels - Classification and terminology |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| CEN/TR 12872:2014 | Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs |
| EN 314-1:2004 | Plywood - Bonding quality - Part 1: Test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.