EN 1600:1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Welding consumables - Covered electrodes for manual arc welding of stainless and heat resisting steels - Classification
Published date
20-08-1997
Publisher
Superseded date
01-02-2012
Superseded by
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Classification
4 Symbols and requirements
4.1 Symbol for the product/process
4.2 Symbol for the chemical composition of all-weld
metal
4.3 Symbol for type of electrode covering
4.4 Symbol for the weld metal recovery and type of
current
4.5 Symbol for welding position
5 Mechanical tests
5.1 General
5.2 Preheating and interpass temperatures
5.3 Pass sequence
6 Chemical analysis
7 Technical delivery condition
8 Designation
Annex A (informative) Description of types of electrode
covering
Annex B (informative) Bibliography
This standard specifies requirements for classification of covered electrodes based on the all-weld metal in the as welded or heat treated conditions for manual metal arc welding of stainless and heat resisting steels.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 1600 : 1ED 1997 | Identical |
| I.S. EN 1600:1998 | Identical |
| BS EN 1600:1997 | Identical |
| PN EN 1600 : 2002 | Identical |
| NEN EN 1600 : 1997 | Identical |
| NF EN 1600 : 1997 | Identical |
| NBN EN 1600 : 1997 | Identical |
| DIN EN 1600:1997-10 | Identical |
| UNE-EN 1600:1998 | Identical |
| 15/30287681 DC : 0 | BS ISO 3581 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
| BS EN ISO 3581:2012 | Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification |
| I.S. EN 1011-3:2000 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 3581:2016 | Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification |
| DIN EN ISO 15011-4:2009-07 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| DIN EN 10088-1:2014-12 | Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014 |
| I.S. EN 10088-1:2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| NF EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN ISO 15618-2:2002 | Qualification testing of welders for under-water welding Diver-welders and welding operators for hyperbaric dry welding |
| ISO 15618-2:2001 | Qualification testing of welders for underwater welding — Part 2: Diver-welders and welding operators for hyperbaric dry welding |
| EN ISO 15618-2:2001 | Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| 01/715519 DC : DRAFT NOV 2001 | PREN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| 11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN ISO 3581:2016 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION (ISO 3581:2016, CORRECTED VERSION 2017-11-01) |
| BS EN 1011-3:2000 | Welding. Recommendations for welding of metallic materials Arc welding of stainless steels |
| DIN EN 1011-3:2001-01 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC - MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
| PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 10088-1:2014 | Stainless steels List of stainless steels |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| DIN EN ISO 15618-2:2002-04 | APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING |
| UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 1597-3 : 1997 | WELDING CONSUMABLES - TEST METHODS - TESTING OF POSITIONAL CAPABILITY OF WELDING CONSUMABLES IN A FILLET WELD |
| ISO 31-0:1992 | Quantities and units — Part 0: General principles |
| EN 1597-1 : 1997 | WELDING CONSUMABLES - TEST METHODS - TEST PIECE FOR ALL-WELD METAL TEST SPECIMENS IN STEEL, NICKEL AND NICKEL ALLOYS |
| ISO 2401:1972 | Covered electrodes — Determination of the efficiency, metal recovery and deposition coefficient |
| ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
| EN 759 : 1997 | WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR WELDING FILLER METALS - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKING |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.