EN 179:2008
Current
Current
The latest, up-to-date edition.
Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
Published date
23-01-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Design requirements
4.2 Performance requirements
4.3 Requirements for product information
5 Tests - General and test apparatus
5.1 General
5.2 Test apparatus
6 Test methods - Procedures
6.1 General
6.2 Test procedure - Test sample A - Environmental tests
6.3 Test procedure - Test sample B - Design and
performance tests
7 Classification
7.1 Category of use (1st character)
7.2 Durability (2nd character)
7.3 Door mass (3rd character)
7.4 Suitability for use on fire/smoke doors (4th character)
7.5 Safety (5th character)
7.6 Corrosion resistance (6th character)
7.7 Security (7th character)
7.8 Projection of operating element (8th character)
7.9 Type of operation (9th character)
7.10 Field of door application (10th character)
7.11 Example of classification
8 Marking
8.1 On the product
8.2 On the packaging
8.3 On the installation instructions
8.4 Mortise lock combined with a separate operating element
9 Evaluation of conformity
9.1 Initial type test
9.2 Sampling, testing and conformity criteria
9.3 Factory production control
9.4 Periodic testing (for all products)
9.5 Annual testing (for all products)
Annex A (normative) - Installation and fixing instructions
Annex B (normative) - Additional requirements for emergency exit
devices intended for use on smoke/fire resisting door
assemblies
Annex C (normative) - Maintenance instructions
Annex D (normative) - Flow chart of test procedure
Annex E (informative) - Guidance for choosing relevant product
standards for particular exit door applications
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
89/106/EEC, EU Construction Products Directive
Bibliography
This European Standard specifies requirements for the manufacture, performance and testing of emergency exit devices mechanically operated by either a lever handle or a push pad for the purpose of achieving a safe exit under an emergency situation on escape routes.The suitability of an emergency exit device for use on smoke/fire-resisting door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this European Standard. Annex B indicates additional requirements for these products.This European Standard covers emergency exit devices, which are either manufactured and placed on the market in their entirety by one producer, or produced by more than one producer and subsequently placed on the market as a kit in a single transaction.
| Committee |
CEN/TC 33
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| SN EN 179 : 2008 | Identical |
| NF EN 179 : 2008 | Identical |
| NS EN 179 : 2ED 2008 | Identical |
| SS-EN 179:2008 | Identical |
| NBN EN 179 : 2008 | Identical |
| DIN EN 179:2008-04 | Identical |
| BS EN 179:2008 | Identical |
| PN EN 179 : 2009 | Identical |
| NEN EN 179 : 2008 | Identical |
| I.S. EN 179:2008 | Identical |
| UNE-EN 179:2009 | Identical |
| UNI EN 179 : 2008 | Identical |
| BS EN 14846:2008 | Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods |
| UNI EN 1634-2 : 2009 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE |
| BS EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics |
| 08/30152055 DC : DRAFT APR 2008 | BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| CEI UNI EN 50518-1 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| 09/30192323 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 07/30170532 DC : DRAFT NOV 2007 | BS EN 1906 - BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TR 14383-5:2010 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 5: PETROL STATIONS |
| I.S. EN 16034:2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| UNI EN 16034 : 2014 | PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS |
| UNI CEI EN 50518-1 : 2014 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| DIN EN 1906:2012-12 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| BS EN 12209:2016 | Building hardware. Mechanically operated locks and locking plates. Requirements and test methods |
| CEN/TS 14383-4:2006 | Prevention of crime - Urban planning and design - Part 4: Shops and offices |
| DIN EN 14846:2008-11 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| 08/30188125 DC : 0 | BS EN 15269-3 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: TIMBER HINGED AND PIVOTED DOORSETS |
| UNI EN 15269-3 : 2012 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE TIMBER FRAMED WINDOWS |
| DIN EN 14846:2015-07 (Draft) | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| UNI EN 14846 : 2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| 03/102517 DC : 0 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TR 14383-8:2009 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 8: PROTECTION OF BUILDINGS AND SITES AGAINST CRIMINAL ATTACKS WITH VEHICLES |
| PREN 14351-2 : DRAFT 2014 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
| PREN 12209 : DRAFT 2011 | BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TS 14383-3:2005 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 3: DWELLINGS |
| PREN 16867 : DRAFT 2015 | BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
| PREN 1906 : DRAFT 2009 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14846:2010 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| UNE-EN 50518-1:2014 | Monitoring and alarm receiving centre - Part 1: Location and construction requirements |
| DIN EN 1191:2013-04 | Windows and doors - Resistance to repeated opening and closing - Test method |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 1191:2012 | Windows and doors. Resistance to repeated opening and closing. Testmethod |
| I.S. EN 1191:2012 | WINDOWS AND DOORS - RESISTANCE TO REPEATED OPENING AND CLOSING - TEST METHOD |
| I.S. EN 14351-1:2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 12209:2016 | BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1125:2008 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14600:2005 | DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION |
| I.S. EN 1906:2012 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| BS EN 50518-1:2013 | Monitoring and alarm receiving centre Location and construction requirements |
| 09/30192320 DC : DRAFT MAY 2009 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| PREN 1125 : DRAFT 2016 | BUILD HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 14383-4:2006 | Prevention of crime. Urban planning and design Shops and offices |
| UNI CEN/TS 14383-3 : 2006 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 3: DWELLINGS |
| 00/104442 DC : DRAFT JUNE 2000 | PREN 13916 - FIRE RESISTING DOORSETS - REQUIREMENTS AND CLASSIFICATION |
| UNE-EN 13637:2016 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| 11/30204176 DC : 0 | BS EN 12209 - BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 14383-3:2005 | Prevention of crime. Urban planning and building design Dwellings |
| I.S. EN 13637:2015 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNE-CEN/TR 14383-8:2011 IN | Prevention of crime - Urban planning and building design - Part 8: Protection of buildings and sites against criminal attacks with vehicles |
| PREN 15269-20 : DRAFT 2017 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS |
| 03/102563 DC : 0 | EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| PREN 50518 : DRAFT 2016 | MONITORING AND ALARM RECEIVING CENTRE |
| S.R. CEN TR 15894:2009 | BUILDING HARDWARE - DOOR FITTINGS FOR USE BY CHILDREN, ELDERLY AND DISABLED PEOPLE IN DOMESTIC AND PUBLIC BUILDINGS - A GUIDE FOR SPECIFIERS |
| 14/30297827 DC : 0 | BS EN 14351-2 - WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS |
| I.S. EN 15269-3:2012 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE |
| PREN 14846 : DRAFT 2015 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1634-2:2008 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE |
| UNE-EN 15269-3:2016 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| UNE-EN 16034:2015 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| I.S. EN 14846:2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1125:2008-04 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 1125:2008 | Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods |
| BS EN 14600:2005 | Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification |
| UNI EN 1906 : 2012 | BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 14600 : 2006 | DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION |
| EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
| UNI EN 1191 : 2013 | WINDOWS AND DOORS - RESISTANCE TO REPEATED OPENING AND CLOSING - TEST METHOD |
| UNI EN 1125 : 2008 | BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 14383-5:2010 | Prevention of crime. Urban planning and building design Petrol stations |
| DIN EN 16034:2014-12 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resistance and/or smoke control characteristics; German version EN 16034:2014 |
| 11/30253413 DC : 0 | BS EN 16361 - POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOOR SETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS |
| CEN/TR 14383-8:2009 | Prevention of crime - Urban planning and building design - Part 8: Protection of buildings and sites against criminal attacks with vehicles |
| BS EN 15269-3:2012 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| DIN EN 1634-2:2009-05 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE |
| 09/30203647 DC : 0 | BS EN 1906 - BUILDING HARDWARE - LEVER HANDLES AND KNOB FURNITURE - REQUIREMENTS AND TEST METHODS |
| 03/118296 DC : 0 | BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| CEN/TR 14383-5:2010 | Prevention of crime - Urban planning and building design - Part 5: Petrol stations |
| 16/30343246 DC : 0 | BS EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 15/30298562 DC : 0 | BS EN 16867 - BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
| 15/30298547 DC : 0 | BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. CEN TS 14383-4:2006 | PREVENTION OF CRIME - URBAN PLANNING AND DESIGN - PART 4: SHOPS AND OFFICES |
| BS EN 14351-1 : 2006 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| UNE-EN 12209:2017 | Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
| UNE-EN 1191:2013 | Windows and doors - Resistance to repeated opening and closing - Test method |
| EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| EN 15269-3:2012 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics |
| EN 14846:2008 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| EN 14600:2005 | Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification |
| EN 1634-2:2008 | Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware |
| EN 1906:2012 | Building hardware - Lever handles and knob furniture - Requirements and test methods |
| 03/102518 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EMERGENCY EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 06/30154477 DC : 0 | EN 1634-2 - FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE |
| PD CEN/TR 15894:2009 | Building hardware. Door fittings for use by children, elderly and disabled people in domestic and public buildings. A guide for specifiers |
| DIN EN 15269-3:2012-10 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| DIN 18250:2006-09 | LOCKS - MORTISE LOCKS FOR FIRE DOORS AND SMOKE CONTROL DOORS |
| 16/30299842 DC : 0 | BS EN 50518 - MONITORING AND ALARM RECEIVING CENTRE |
| 15/30298556 DC : DRAFT FEB 2015 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 04/19991935 DC : DRAFT MAR 2004 | BS EN 1634-2 - FIRE RESISTANCE TESTS FOR DOOR AND SHUTTER ASSEMBLIES - PART 2: FIRE DOOR HARDWARE - BUILDING HARDWARE FOR FIRE RESISTING DOORSETS AND OPENABLE WINDOWS |
| DIN EN 13637:2015-12 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TR 15894 : 2009 | BUILDING HARDWARE - DOOR FITTINGS FOR USE BY CHILDREN, ELDERLY AND DISABLED PEOPLE IN DOMESTIC AND PUBLIC BUILDINGS - A GUIDE FOR SPECIFIERS |
| UNE-CEN/TS 14383-3:2011 EX | Prevention of crime - Urban planning and building design - Part 3: Dwellings |
| I.S. EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| 17/30359220 DC : 0 | BS EN 15269-20 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS |
| UNI CEN/TS 14383-4 : 2006 | PREVENTION OF CRIME - URBAN PLANNING AND DESIGN - PART 4: SHOPS AND OFFICES |
| BS EN 1906:2012 | Building hardware. Lever handles and knob furniture. Requirements and test methods |
| EN 1191:2012 | Windows and doors - Resistance to repeated opening and closing - Test method |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| CEN/TR 15894:2009 | Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers |
| DIN EN 14600:2006-03 | DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION |
| EN 12209:2016 | Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
| CEN/TS 14383-3:2005 | Prevention of crime - Urban planning and building design - Part 3: Dwellings |
| UNE-EN 14351-1:2006 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| PREN 13637 : DRAFT 2014 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.