EN 61189-5-1:2016
Current
Current
The latest, up-to-date edition.
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies
Published date
30-09-2016
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Accuracy, precision and resolution
4 Catalogue of approved test methods
5 List of contents of the IEC 61189-5 series
Annex A (informative) - Tests
Annex B (informative) - Guidance documents and handbooks
Bibliography
IEC 61189-5-1:2016 is a catalogue of test methods representing methodologies and procedures that can be applied to test printed board assemblies. This part of IEC 61189 contains the types of content of the IEC 61189-5 series, as well as guidance documents and handbooks for printed board assemblies.
| Committee |
CLC/SR 91
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 61189-5-1 : 2016 | Identical |
| DIN EN 61189-5-1:2017-04 | Identical |
| UNE-EN 61189-5-1:2016 | Identical |
| PN EN 61189-5-1 : 2016 | Identical |
| NEN EN IEC 61189-5-1 : 2016 | Identical |
| I.S. EN 61189-5-1:2016 | Identical |
| SN EN 61189-5-1:2016 | Identical |
| SS-EN 61189-5-1 :2017 | Identical |
| BS EN 61189-5-1:2016 | Identical |
| NBN EN 61189-5-1 : 2016 | Identical |
| CEI EN 61189-5-1 : 1ED 2017 | Identical |
| IEC 61189-5-1:2016 | Identical |
| PNE-FprEN 61189-5-1 | Identical |
| IPC HDBK 830 : A | GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS |
| IEC 61189-5-503:2017 | Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards |
| IPC 9503 : 0 | MOISTURE SENSITIVITY CLASSIFICATION FOR NON-IC COMPONENTS |
| IPC 9704 : A | PRINTED CIRCUIT ASSEMBLY STRAIN GAGE TEST GUIDELINE |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IPC 9252 : A | REQUIREMENTS FOR ELECTRICAL TESTING OF UNPOPULATED PRINTED BOARDS |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IEC 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
| IEC 61190-1-2:2014 | Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly |
| IPC 6018 : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR HIGH FREQUENCY (MICROWAVE) PRINTED BOARDS |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 61189-5-2:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies |
| IPC 5702 : 0 | GUIDELINES FOR OEMS IN DETERMINING ACCEPTABLE LEVELS OF CLEANLINESS OF UNPOPULATED PRINTED BOARDS |
| IPC 9703 : 0 | IPC/JEDEC MECHANICAL SHOCK TEST GUIDELINES FOR SOLDER JOINT RELIABILITY |
| ISO 9455-2:1993 | Soft soldering fluxes — Test methods — Part 2: Determination of non-volatile matter, ebulliometric method |
| IPC TM 650 : 0 | TEST METHODS MANUAL |
| IPC SM 840 : E | QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
| IEC 61189-1:1997+AMD1:2001 CSV | Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology |
| IPC HDBK 001 : E | HANDBOOK AND GUIDE TO SUPPLEMENT J-STD-001 |
| IPC 9501 : 0 | PWB ASSEMBLY PROCESS SIMULATION FOR EVALUATION OF ELECTRONIC COMPONENTS (PRECONDITIONING IC COMPONENTS) |
| IEC 61189-6:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies |
| IPC 9631 : 0 | USER GUIDE FOR IPC-TM-650 - METHOD 2.6.27: THERMAL STRESS, CONVECTION REFLOW ASSEMBLY SIMULATION |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IEC 62137:2004 | Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
| IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| IEC 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| ISO 9455-1:1990 | Soft soldering fluxes — Test methods — Part 1: Determination of non-volatile matter, gravimetric method |
| IPC HDBK 610 : 0 | HANDBOOK AND GUIDE TO SUPPLEMENT IPC-A-610 (INCLUDES IPC-A-610 B-C-D COMPARISONS |
| IEC 61189-5-4:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies |
| IPC 9691 : A | USER GUIDE FOR THE IPC-TM-650, METHOD 2.6.25, CONDUCTIVE ANODIC FILAMENT (CAF) RESISTANCE AND OTHER INTERNAL ELECTROCHEMICAL MIGRATION TESTING |
| IPC 3406 : 0 | GUIDELINES FOR ELECTRICALLY CONDUCTIVE SURFACE MOUNT ADHESIVES |
| IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| IPC 9504 : 0 | ASSEMBLY PROCESS SIMULATION FOR EVALUATION OF NON-IC COMPONENTS (PRECONDITIONING NON-IC COMPONENTS) |
| IPC 9502 : 0 | PWB ASSEMBLY SOLDERING PROCESS GUIDELINE FOR ELECTRONIC COMPONENTS |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 9001:2015 | Quality management systems — Requirements |
| IPC 9201 : A | SURFACE INSULATION RESISTANCE HANDBOOK |
| IPC AC 62 : A | AQUEOUS POST SOLDER CLEANING HANDBOOK |
| IPC HDBK 840 : 0 | SOLDER MASK HANDBOOK |
| IPC 6013 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS |
| IPC 9202 : 0 | MATERIAL AND PROCESS CHARACTERIZATION/QUALIFICATION TEST PROTOCOL FOR ASSESSING ELECTROCHEMICAL PERFORMANCE |
| IPC 9203 : 0 | USERS GUIDE TO IPC-9202 AND THE IPC-B-52 STANDARD TEST VEHICLE |
| IPC 9261 : A | IN-PROCESS DPMO AND ESTIMATED YIELD FOR PCAS |
| IPC 5701 : 0 | USERS GUIDE FOR CLEANLINESS OF UNPOPULATED PRINTED BOARDS |
| IPC 7912 : A | END-ITEM DPMO FOR PRINTED CIRCUIT BOARD ASSEMBLIES |
| IEC 61190-1-3:2007+AMD1:2010 CSV | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
| IPC 6012 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.