EN ISO 3449:2008
Current
Current
The latest, up-to-date edition.
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
Published date
17-09-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Laboratory tests
6 Performance requirements
7 Labelling
8 Reporting of test results
Annex A (normative) Typical test report
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
ISO 3449:2004 specifies laboratory tests for measuring the structural characteristics of, and gives performance requirements in a representative test for, falling-object protective structures (FOPS) intended for use on ride-on earth-moving machines as defined in ISO 6165. It is applicable to both FOPS supplied as an integral part of the machine and those supplied separately for attachment to the machine. It is not applicable to FOPS intended for use on landfill compactors, excavators, rollers, trenchers, pipelayers, for the additional seat for operation of an attachment (e.g. attachment backhoe), or on machines with a power rating of less than 15 kW.
| Committee |
CEN/TC 151
|
| DevelopmentNote |
Supersedes EN 13627. (11/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 3449 : 2008 | Identical |
| DIN EN ISO 3449:2009-07 | Identical |
| PN EN ISO 3449 : 2009 | Identical |
| UNE-EN ISO 3449:2008 | Identical |
| ISO 3449:2005 | Identical |
| I.S. EN ISO 3449:2008 | Identical |
| NEN EN ISO 3449 : 2008 | Identical |
| NBN EN ISO 3449 : 2009 | Identical |
| NS EN ISO 3449 : 2ED 2008 | Identical |
| SN EN ISO 3449 : 2008 | Identical |
| BS EN ISO 3449:2008 | Identical |
| UNI EN ISO 3449 : 2009 | Identical |
| UNE-EN 16228-2:2015 | Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining |
| 08/30179253 DC : DRAFT JULY 2008 | BS EN 474-1 AMD1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 474-3 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| I.S. EN 16228-2:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING |
| PREN 474-6 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS |
| BS EN 1459-1:2017 | Rough-terrain trucks. Safety requirements and verification Variable-reach trucks |
| 13/30273889 DC : 0 | BS EN 16517 - AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY |
| UNE-EN 1459-2:2016 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| BS EN 474-4 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| EN 16191:2014 | Tunnelling machinery - Safety requirements |
| EN 16228-3:2014 | Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) |
| EN 16228-2:2014 | Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining |
| BS EN 16228-2:2014 | Drilling and foundation equipment. Safety Mobile drill rigs for civil and geotechnical engineering, quarrying and mining |
| 13/30256922 DC : 0 | BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| EN 474-1:2006+A5:2018 | Earth-moving machinery - Safety - Part 1: General requirements |
| I.S. EN 16228-3:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 3: HORIZONTAL DIRECTIONAL DRILLING EQUIPMENT (HDD) |
| UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
| DIN EN 474-4:2012-05 | Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders (includes Amendment A2:2012) |
| I.S. EN 474-3:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS |
| I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| I.S. EN 474-5:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS |
| I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| I.S. EN 474-6:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS |
| I.S. EN 474-4:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS |
| NF EN 474-4 : 1996 + A2 2012 | EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS |
| 14/30302140 DC : 0 | BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| DIN EN 16228-2:2014-10 | Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining |
| UNI EN 16228-3 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 3: HORIZONTAL DIRECTIONAL DRILLING EQUIPMENT (HDD) |
| UNI EN 16228-2 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING |
| DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN 1459-2:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| I.S. EN 474-1:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 1459-1 : DRAFT 2014 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| EN 1459-2:2015 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| EN 474-4:2006+A2:2012 | Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
| UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 474-6 : 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS |
| UNI EN 474-5 : 2013 | EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS |
| UNI EN 474-3 : 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS |
| UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| UNI EN 474-4 : 2012 | EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS |
| DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 11/30236560 DC : 0 | BS EN 16228-3 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 3: HORIZONTAL DIRECTIONAL DRILLING EQUIPMENT (HDD) |
| 10/30233949 DC : 0 | BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| 10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 11/30236557 DC : 0 | BS EN 16228-2 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 474-1 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 474-1:2006+A6:2019 | Earth-moving machinery. Safety General requirements |
| DIN EN 474-5:2013-12 | Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators (includes Amendment A3:2013) |
| DIN EN 474-6:2010-05 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers (includes Amendment A1:2009) |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| BS EN 474-6 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS |
| BS EN 474-5 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS |
| EN 474-5:2006+A3:2013 | Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| EN 474-6:2006+A1:2009 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
| EN 474-3:2006+A1:2009 | Earth-moving machinery - Safety - Part 3: Requirements for loaders |
| DIN EN 16228-3:2014-10 | Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) |
| BS EN 16228-3:2014 | Drilling and foundation equipment. Safety Horizontal directional drilling equipment (HDD) |
| 13/30257309 DC : 0 | BS EN 1459-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| UNE-EN 16228-3:2015 | Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) |
| DIN EN 474-1:2014-03 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 1459-1:2017 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
| BS EN 1459-2 : 2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| UNE-EN 1459-1:2018 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
| PREN 16517 : DRAFT 2017 | AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY |
| DIN EN 474-3:2010-02 | Earth-moving machinery - Safety - Part 3: Requirements for loaders (includes Amendment A1:2009) |
| BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
| BS EN 474-3 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
| UNE-EN 474-5:2007 | Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
| UNE-EN 474-4:2008 | Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 10262:1998 | Earth-moving machinery Hydraulic excavators Laboratory tests and performance requirements for operator protective guards |
| ISO 3164:2013 | Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume |
| ISO 6165:2012 | Earth-moving machinery — Basic types — Identification and terms and definitions |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.