HB 18.28-1991
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
26-06-2021
English
01-01-1991
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.28-1991 and produced as a Joint Australian/New Zealand Standard.
Committee |
QR-010
|
DocumentType |
Handbook
|
ISBN |
0 7262 6891 7
|
Pages |
16
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
UnderRevision |
Standards | Relationship |
ISO/IEC Guide 28:1982 | Identical |
ISO/IEC Guide 28:2004 | Identical |
In Australia First published as HB18.27-1991.
In New Zealand First published as HB18.27-1991.
AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
AS 3750.18-2002 | Paints for steel structures Moisture cure urethane (single-pack) systems |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS 1281-2001 | Cement mortar lining of steel pipes and fittings (Reconfirmed 2018) |
AS 3565.5-2004 | Meters for water supply - Water meters with two integral single check valves |
AS/NZS 2908.1:2000 | Cellulose-cement products Corrugated sheets (Reconfirmed 2020) |
AS 1617.1-2003 | Refractory bricks and shapes Fireclay |
AS 3582.2-2001 | Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
AS 4751(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous open sections |
AS 2740-2001 | Wedge-type sockets |
AS 5100.5-2004 | Bridge design Concrete |
AS/NZS 4766(INT):2002 | Polyethylene storage tanks for water and chemicals |
AS/NZS 3584.1:2005 | Diesel engine systems for underground coal mines Fire protected - Heavy duty |
AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
AS 1085.10-2002 | Railway track material Rail anchors |
AS/NZS 2009:2002 | Glass beads for pavement-marking materials |
AS 1901-2004 | Electroplated coatings - Gold and gold alloys |
AS 2945(INT)-2002 | Batch-type washer/disinfectors for health care facilities |
AS 1646.4-2005 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates |
AS 2319-2001 | Rigging screws and turnbuckles |
AS 1332-2000 | Conveyor belting - Textile reinforced (Reconfirmed 2016) |
AS 1085.13-2002 | Railway track material Spring fastening spikes for sleeper plates (Reconfirmed 2013) |
AS 3600-2001 | Concrete structures |
AS 1410-2003 | Sterilizers - Steam - Pre-vacuum |
AS 1406-2004 | Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017) |
AS 2423-2002 | Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021) |
AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
AS 1085.18-2003 | Railway track material Screw spikes and threaded inserts |
AS 1731.2-2000 | Refrigerated display cabinets General mechanical and physical requirements |
ATS 5200.104-2005 | Appliances (miscellaneous) |
AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
AS/NZS 4692.1:2005 | Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016) |
AS/NZS 1546.3:2001 | On-site domestic wastewater treatment units Aerated wastewater treatment systems |
AS/NZS 3582.3:2002 | Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS/NZS 4798(INT):2005 | Polyethylene maintenance shafts |
AS 4750(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous hollow sections |
AS/NZS 1518:2002 | External extruded high-density polyethylene coating system for pipes (Reconfirmed 2016) |
AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
AS/NZS 1314:2003 | Prestressing anchorages (Reconfirmed 2016) |
AS 1085.17-2003 | Railway Track Material Steel Sleepers (Reconfirmed 2013) |
AS/NZS 4999(INT):2003 | PVC-U maintenance shafts |
AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
AS 3775.1-2004 | Chain slings - Grade T Product specification |
AS/NZS 4130:2003 | Polyethylene (PE) pipes for pressure applications |
AS/NZS 4765(INT):2000 | Modified PVC (PVC-M) pipes for pressure applications |
AS 1085.2-2002 | Railway track material Fishplates |
AS 3565.2-2004 | Meters for water supply - Combination meters |
AS 1418.10(INT)-2004 | Cranes, hoists and winches Elevating work platforms |
AS 4506-2005 | Metal finishing - Thermoset powder coatings (Reconfirmed 2017) |
AS 1085.3-2002 | Railway track material Sleeper plates (Reconfirmed 2013) |
AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
AS/NZS 3584.3:2005 | Diesel engine systems for underground coal mines - Maintenance |
AS 1472-2003 | Carbon steel spring wire for mechanical springs |
AS 4321-2001 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019) |
AS 3743-2003 | Potting mixes |
AS 1085.14-2003 | Railway track material Prestressed concrete sleepers |
AS/NZS 4130:2001 | Polyethylene (PE) pipes for pressure applications |
AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
AS/NZS 4131:2003 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS/NZS 4067:2004 | Firefighters' helmets |
AS 1443-2004 | Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022) |
AS 1085.4-2002 | Railway track material Fishbolts and nuts (Reconfirmed 2013) |
AS/NZS 1221:1997 | Fire hose reels (Reconfirmed 2020) |
AS/NZS 1605:2000 | Methods for sampling and analysing timber preservatives and preservative-treated timber |
AS 4795-2002 | Double-flanged butterfly valves for waterworks purposes |
AS/NZS 4065:2000 | Concrete utility services poles |
AS/NZS 2699.3:2000 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS 2913-2000 | Evaporative airconditioning equipment (Reconfirmed 2016) |
AS 5039-2003 | Security screen doors and security window grilles |
AS 2266-2002 | Carbon steel spring wire for bedding and seating |
ATS 5200.101-2005 | Appliances (low hazard rating) |
AS/NZS 4677:2000 | Steel utility services poles |
AS 2192-2002 | Sterilizers - Steam - Downward-displacement |
AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 1856-2004 | Electroplated coatings - Silver |
AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
AS/NZS 2280:2004 | Ductile iron pipes and fittings |
AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
AS 1192-2004 | Electroplated coatings - Nickel and chromium (Reconfirmed 2017) |
AS 6401-2003 | Knife-gate valves for waterworks purposes (Reconfirmed 2015) |
AS 2429-2004 | Electroplated coatings of rhodium for general engineering applications |
AS 2638.1-2002 | Gate valves for waterworks purposes Metal seated |
AS 4441(INT)-2003 | Oriented PVC (PVC-O) pipes for pressure applications |
AS 4454-2003 | Composts, soil conditioners and mulches |
AS/NZS 2699.3:2002 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS/NZS 2699.2:2000 | Built-in components for masonry construction Connectors and accessories |
AS/NZS 3718:2003 | Water supply - Tap ware |
AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
AS 1085.7-2003 | Railway track material Spring washers |
AS 1085.1-2000 | Railway permanent way material Steel rails |
ATS 5200.105-2005 | |
AS 1394-2001 | Round steel wire for ropes |
AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
AS 1085.19-2003 | Railway track material Resilient fastening assemblies (Reconfirmed 2013) |
AS/NZS 4131:2001 | Polyethylene (PE) compounds for pressure pipes and fittings |
AS 2321-2001 | Short-link chain for lifting purposes |
AS 1324.1-2001 | Air filters for use in general ventilation and airconditioning Application, performance and construction |
AS 4750-2003 | Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017) |
AS 2638.2-2002 | Gate valves for waterworks purposes - Resilient seated |
AS 3952-2002 | Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015) |
AS 4738.1-2004 | Metal castings Ferrous sand moulded |
AS 4796-2001 | Water supply - Metal bodied and plastic bodied ball valves for property service connection |
AS/NZS 3584.2:2003 | Diesel engine systems for underground coal mines - Explosion protected |
AS 1085.8-2002 | Railway track material Dogspikes |
AS 4310-2004 | DN 80 piston type vacuum interface valves for municipal sewer systems |
AS 3565.3-2004 | Meters for water supply - Water meters with integral dual check valves |
AS/NZS 2699.1:2000 | Built-in components for masonry construction Wall ties |
AS/NZS 4859.1:2002 | Materials for the thermal insulation of buildings General criteria and technical provisions |
AS 4381-2002 | Single-use face masks for use in health care |
AS 4314-2005 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
AS 1085.12-2002 | Railway track material Insulated joint assemblies (Reconfirmed 2013) |
AS 1085.3-2000 | Railway permanent way material - Part 3: Sleeper plates |
AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 2453-2004 | Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017) |
AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
AS 3705-2003 | Geotextiles - Identification, marking, and general data |
AS 2741-2002 | Shackles (Reconfirmed 2014) |
AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
AS 3850-2003 | Tilt-up concrete construction |
AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
AS 3818.1-2003 | Timber - Heavy structural products - Visually graded General requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.