I.S. EN 1755:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES
Available format(s)
Hardcopy , PDF
Superseded date
18-01-2024
Superseded by
Language(s)
English
Published date
01-01-2015
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Verification of safety requirements and/or protective
measures
6 Information for use
Annex A (normative) - List of significant hazards
Annex B (informative) - Relationship between zones
(area classification) and truck categories
Annex C (informative) - Typical example of cladding of
load handling devices
Annex D (informative) - Typical examples of non-conductive
surface areas according to 4.7.3.1
Annex E (normative) - Requirements for transmission belts
in accordance with ISO 9563 or ISO 1813
Annex F (informative) - Significant technical changes
between this document and the previous edition of
this European Standard
Annex G (informative) - Warning labels for trucks with
restricted breathing enclosure(s)
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 94/9/EC
Bibliography
Pertains to self-propelled and pedestrian propelled manual and semi-manual industrial trucks as defined in ISO 5053-1 including their load handling devices and attachments (hereafter referred to as trucks) intended for use in potentially explosive atmospheres.
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN 1755 : 2015 | Identical |
| SN EN 1755:2016 | Identical |
| BS EN 1755:2015 | Identical |
| EN 1755:2015 | Identical |
| NEN EN 1755 : 2015 | Identical |
| NBN EN 1755 : 2015 | Identical |
| UNE-EN 1755:2016 | Identical |
| NF EN 1755 : 2016 | Identical |
| UNI EN 1755 : 2013 | Identical |
| ONORM EN 1755 : 2016 | Identical |
| DIN EN 1755:2016-02 | Identical |
| EN 1834-3:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| ISO 3691-5:2014 | Industrial trucks Safety requirements and verification Part 5: Pedestrian-propelled trucks |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| EN 1526:1997+A1:2008 | Safety of industrial trucks - Additional requirements for automated functions on trucks |
| EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
| EN 60079-29-1:2016 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| ISO 9563:2015 | Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
| ISO 22877:2004 | Castors and wheels — Vocabulary, symbols and multilingual terminology |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| EN 16307-6:2014 | Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers |
| IEC 60079-29-3:2014 | Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| ISO 13564-1:2012 | Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity |
| ISO 3691-1:2011 | Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| EN 16307-1:2013+A1:2015 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN 1459:1998+A3:2012 | Safety of industrial trucks - Self-propelled variable reach trucks |
| EN 12895:2015 | Industrial trucks - Electromagnetic compatibility |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
| EN 60079-31:2014 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
| ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| ISO 284:2012 | Conveyor belts — Electrical conductivity — Specification and test method |
| ISO 15870:2000 | Powered industrial trucks — Safety signs and hazard pictorials — General principles |
| EN 1757-3:2002 | Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60079-29-2:2015 RLV | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN 16307-5:2013 | Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| EN 13059:2002+A1:2008 | Safety of industrial trucks - Test methods for measuring vibration |
| ISO 6292:2008 | Powered industrial trucks and tractors Brake performance and component strength |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| IEC 60079-31:2013 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
| EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
| ISO/TS 3691-7:2011 | Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community |
| EN 60079-29-2:2015 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| ISO 3691-6:2013 | Industrial trucks Safety requirements and verification Part 6: Burden and personnel carriers |
| EN 12053:2001+A1:2008 | Safety of industrial trucks - Test methods for measuring noise emissions |
| EN 60079-29-3:2014 | Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 50272-3 : 2002 COR 2003 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| EN 1834-1:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| ISO 20344:2011 | Personal protective equipment Test methods for footwear |
| ISO 5053-1:2015 | Industrial trucks Terminology and classification Part 1: Types of industrial trucks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.