I.S. EN 4700-003:2010
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2010
Publisher
€53.00
Excluding VAT
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
Describes the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy tube.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 4700-003:2010 | Identical |
| BS EN 4700-003:2010 | Equivalent |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 6507-1:2005 | Metallic materials — Vickers hardness test — Part 1: Test method |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| ISO 6506-1:2014 | Metallic materials — Brinell hardness test — Part 1: Test method |
| EN 10079:2007 | Definition of steel products |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| PREN 2002-17 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - TUBE USED UNDER PRESSURE - PART 17 - INTEGRITY TEST |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| ISO 8493:1998 | Metallic materials — Tube — Drift-expanding test |
| SAE AMS2750E | Pyrometry |
| PREN 3718 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES |
| ISO 3887:2003 | Steels — Determination of depth of decarburization |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
| PREN 2002-20 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 20: EDDY CURRENT TESTING OF CIRCULAR CROSS-SECTION TUBES |
| EN ISO 3651-1 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST) |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| ISO 643:2012 | Steels — Micrographic determination of the apparent grain size |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| PREN 2002-18 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 18 - HYDRAULIC DISTENSION TEST FOR TUBE |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 8492:2013 | Metallic materials — Tube — Flattening test |
| EN 2002-002:2005 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
| SAE AMS2315G | Determination of Delta Ferrite Content |
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
| EN 2002-005:2007 | Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.