I.S. EN 50583-1:2016
Current
Current
The latest, up-to-date edition.
PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2016
Publisher
€33.00
Excluding VAT
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Labelling
6 Documentation and declaration of performance
Annex A (normative) - Further requirements on PV
modules that contain glass
Bibliography
Pertains to photovoltaic modules used as construction products.
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 50583-1:2016 | Identical |
| BS EN 50583-1:2016 | Equivalent |
| EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| EN 13116:2001 | Curtain walling - Resistance to wind load - Performance requirements |
| CLC/TS 61836:2009 | Solar photovoltaic energy systems - Terms, definitions and symbols |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| ISO 12631:2017 | Thermal performance of curtain walling — Calculation of thermal transmittance |
| EN 1096-4:2004 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| IEC 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| PREN 1279-5 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| IEC 61730-2:2016 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| IEC TS 61836:2007 | Solar photovoltaic energy systems - Terms, definitions and symbols |
| EN ISO 12543-2:2011 | Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) |
| EN 61646:2008 | Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| EN 15978:2011 | Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method |
| EN 15804:2012 | Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products |
| EN 61730-1:2007/A11:2014 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
| ISO 12543-3:2011 | Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass |
| EN 14500:2008 | Blinds and shutters - Thermal and visual comfort - Test and calculation methods |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 62446:2009 | Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection |
| EN ISO 12543-3:2011 | Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011) |
| EN 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| EN ISO 12631:2017 | Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017) |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 14179-2:2005 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| IEC 61082-1:2014 RLV | Preparation of documents used in electrotechnology - Part 1: Rules |
| CEN/TR 15941:2010 | Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data |
| ISO 12543-2:2011 | Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass |
| EN 12519:2004 | Windows and pedestrian doors - Terminology |
| EN 1279-3:2002 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
| IEC 61646:2008 | Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| EN 572-9:2004 | Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard |
| EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
| EN 1863-2:2004 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
| EN 61730-2:2007/A1:2012 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011) |
| EN 674:2011 | Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method |
| EN 15942:2011 | Sustainability of construction works - Environmental product declarations - Communication format business-to-business |
| EN 12150-2:2004 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| IEC 61730-1:2016 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| EN 13830:2015 | Curtain walling - Product standard |
| ISO 12543-1:2011 | Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts |
| EN 12179:2000 | Curtain walling - Resistance to wind load - Test method |
| EN 61082-1:2015 | Preparation of documents used in electrotechnology - Part 1: Rules |
| EN 675:2011 | Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method |
| EN 1279-2:2002 | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
| IEC 62446:2009 | Grid connected photovoltaic systems - Minimum requirements for system documentation, commissioning tests and inspection |
| EN 13119:2016 | Curtain walling - Terminology |
| ISO 12543-4:2011 | Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability |
| EN ISO 12543-4:2011 | Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011) |
| ISO 12543-6:2011 | Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| EN ISO 12543-5:2011 | Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011) |
| EN 13956:2012 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| IEC 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| EN 16002:2010 | Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing |
| EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| ISO 12543-5:2011 | Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing |
| EN 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.