I.S. EN 545:2010
Current
The latest, up-to-date edition.
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Performance requirements for joints and pipe saddles
6 Test methods
7 Performance test methods
8 Tables of dimensions
9 Evaluation of conformity
Annex A (normative) Allowable pressures
Annex B (informative) Longitudinal bending resistance of pipes
Annex C (informative) Diametral stiffness of pipes
Annex D (informative) Specific coatings, field of use,
characteristics of soils
Annex E (informative) Field of use, water characteristics
Annex F (informative) Calculation method of buried pipelines,
heights of cover
Bibliography
Applies to pipes, fittings and accessories which are: - manufactured with socketed, flanged or spigot ends; - supplied externally and internally coated; - suitable for fluid temperatures between 0 Degrees C and 50 Degrees C, excluding frost; - not intended for use in areas subject to reaction to fire regulations.
| DevelopmentNote |
Supersedes I.S. 262 & I.S. 262-2. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
96
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 545 : 2010 | Identical |
| UNE-EN 545:2011 | Identical |
| BS EN 545:2010 | Identical |
| EN 545:2010 | Identical |
| NS EN 545 : 1ED 2010 | Identical |
| NF EN 545 : 2010 | Identical |
| UNI EN 545 : 2010 | Identical |
| SN EN 545 : 2010 | Identical |
| NEN EN 545 : 2010 | Identical |
| DIN EN 545:2011-09 | Identical |
| EN 15189:2006 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| EN ISO 7091:2000 | Plain washers - Normal series - Product grade C (ISO 7091:2000) |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 7091:2000 | Plain washers Normal series Product grade C |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 15542:2008 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| ISO/IEC Guide 65:1996 | General requirements for bodies operating product certification systems |
| EN 10310:2003 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| EN 14901:2014 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| EN 15655:2009 | Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods |
| ISO 2531:2009 | Ductile iron pipes, fittings, accessories and their joints for water applications |
| EN 14628:2005 | Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.