I.S. EN 60204-1:2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of machinery - Electrical equipment of machines - Part 1: General requirements(IEC 60204-1:2016 , modified)
Available format(s)
Hardcopy , PDF
Language(s)
English - French
Published date
03-10-2018
Publisher
Superseded date
03-12-2025
Superseded by
€317.00
Excluding VAT
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
This part of IEC 60204 applies to electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner.
| Committee |
TC 44
|
| DocumentType |
Standard
|
| ISBN |
978-2-8322-3621-5
|
| Pages |
304
|
| ProductNote |
This standard also refers to :CENELEC HD 516 S2,EN 50160:2010,IEC 61000-5-2:1997,IEC TR 61200-53:1994,IEC 60757:1983. The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. If blank see CEN/CENELEC cover page
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 60204-1:2018 | Identical |
| IEC 60204-1:2016 | Identical |
| BS EN 60204-1:2018 | Equivalent |
| ISO 14122-1:2001 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels |
| IEC TR 61912-1:2007 | Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings |
| IEC 60038:2009 | IEC standard voltages |
| IEC 61558-2-2:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 61355-1:2008 | Classification and designation of documents for plants, systems and equipment - Part 1: Rules and classification tables |
| IEC 61000-6-1:1997 | Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments |
| IEC 62491:2008 | Industrial systems, installations and equipment and industrial products - Labelling of cables and cores |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| IEC 61643-12:2008 | Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles |
| IEC GUIDE 106:1996 | Guide for specifying environmental conditions for equipmentperformance rating |
| IEC 81346-1:2009 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules |
| IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
| IEC 60947-1:1999+AMD1:2000+AMD2:2001 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| ISO 14118:2000 | Safety of machinery — Prevention of unexpected start-up |
| ISO 13851:2002 | Safety of machinery — Two-hand control devices — Functional aspects and design principles |
| IEC 60909-0:2001 | Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| IEC 61084-2-4:2017 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts |
| IEC 62027:2011 | Preparation of object lists, including parts lists |
| IEC 60947-7-1:2009 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
| IEC 81346-2:2009 | Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| IEC 60757:1983 | Code for designation of colours |
| IEC 61082-1:2006 | Preparation of documents used in electrotechnology - Part 1: Rules |
| IEC 61175-1:2015 | Industrial systems, installations and equipment and industrial products - Designation of signals - Part 1: Basic rules |
| IEC 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| IEC 60947-5-8:2006 | Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches |
| IEC 60034-5:2000+AMD1:2006 CSV | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 61000-6-4:2006 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| IEC 60034-11:2004 | Rotating electrical machines - Part 11: Thermal protection |
| IEC 61180-2:1994 | High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
| IEC 62507-1:2010 | Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| IEC 60947-5-2:2007 | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches |
| IEC TR 60755:2008 | General requirements for residual current operated protective devices |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| IEC 60204-33:2009 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| IEC 62020:1998+AMD1:2003 CSV | Electrical accessories - Residual current monitors for household and similar uses (RCMs) |
| ISO 14122-2:2001 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| ISO 3864-1:2011 | Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings |
| IEC 60947-4-1:2000+AMD1:2002 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| IEC 61506:1997 | Industrial-process measurement and control - Documentation ofapplication software |
| IEC 62305-4:2010 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| ISO 14122-3:2001 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| IEC 61800-5-2:2007 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| IEC 62745:2017 | Safety of machinery - Requirements for cableless control systems of machinery |
| ISO 7000:2014 | Graphical symbols for use on equipment — Registered symbols |
| IEC 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| IEC PAS 62569-1:2009 | Generic specification of information on products - Part 1: Principles and methods |
| IEC 60269-1:1998 | Low-voltage fuses - Part 1: General requirements |
| IEC 61666:2010 | Industrial systems, installations and equipment and industrial products - Identification of terminals within a system |
| IEC 60204-31:2001 | Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
| IEC TR 60890:2014 | A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.