I.S. EN 62326-1:2002
Current
The latest, up-to-date edition.
PRINTED BOARDS - GENERIC SPECIFICATION
Hardcopy , PDF
English
01-01-2002
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Endorsement notice
Annex ZA (normative) Normative references to
international publications with their
European publications
Defines capability approval procedures for printed boards. In addition, a technology approval schedule may also be provided as an alternative for manufacturers employing a system of process control for establishing product conformity.
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
118
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
IEC 62326-1:2002 | Identical |
UNE-EN 62326-1:2004 | Identical |
EN 62326-1:2002 | Identical |
NF EN 62326-1 : 2002 | Identical |
SN EN 62326-1 : 1997 | Identical |
BS EN 62326-1:2002 | Identical |
DIN EN 62326-1:2002-12 | Identical |
NBN EN 62326-1 : 2003 | Identical |
IEC 61249-2-12:1999 | Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad |
IECQ 001002-3:2005 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES |
IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
EN 62326-4-1:1997 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability Detail Specification - Performance levels A, B and C |
IECQ 001002-2:1998 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 2: DOCUMENTATION |
EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
IEC 62326-4:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification |
EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
EN 61249-2-4:2002 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
IEC 61189-3:2007 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
EN 61249-2-12:1999 | Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad |
IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
ISO 9001:2015 | Quality management systems — Requirements |
IEC 62326-4-1:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability detail specification - Performance levels A, B and C |
IEC 61249-2-4:2001 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
IEC 61182-1:1994 | Printed boards - Electronic data description and transfer - Part 1: Printed board description in digital form |
EN 62326-4:1997 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.